Vores kunder ligger øverst på Google

T16IZ-SUPER Radio Mode-2 - TX only - FASSTest, T-FHSS, S-FHSS

Futaba T16IZ-SUPER Mode-1/2/3/4 - Transmitter Only MODE-1/2/3/4:This transmitter is set on default Mode-2, with the throttle on the left hand stick and elevator on the right stick. But it can be changed in the software to any of the Mode-1/2/3/4 by the user (see the pdf manual page 29).FASSTest SystemThe T16IZ SUPER transmitter has adopted the bidirectional communication system "FASSTest". Data from the receiver can be cheched in your transmitter. FASSTest is a maximum 18 channels 2.4GHz dedicated system.Color Touch LCD ScreenT16IZ SUPER has an HVGA 4.3", full-color, backlit LCD touch screen. The screen is transflective which enabsles booth indoor and outdoor visibility.S.BUS2 SystemBy using the S.BUS2 system, multiple servos, gyros and telemetry sensors are easily installed with a minimum amount of cables.Model Types Multicopter Helicopters: 8 different swash plate types are available Airplanes: 7 wing types & 3 tail types are available Functions and mixers necessary for each model type is set in advance at the factory Lithium-Ion Polymer BatteryT16IS SUPER is operated by a 7.4V/2000mAh Li-Ion polymer battery.MicroSD Card (not included)Model data can be saved to a microSD card (SD: 32MB-2GB / SDHC: 4-32GB). When T16IZ SUPER transmitter software files are released, the software can be updated by using a microSD card update.Edit ButtonsTwo edit update buttons are provided and the operating screen can be immediately "Returned" to the HOME screen during operation. Setting operation can be performed easily by combining this button with a touch sensor.Vibration FunctionSelects a function that aerts the operator to various alarms by vibrating the transmitter in addition to sounding a buzzer.Speech FunctionA function which allows the system to provide telemetry data audibly. This function can also be utilized with commercial available earphones.Compatible receivers (as of MAY 2023):S-FHSS PROTOCOL: R2008GS R2008SB R2106SB R2001SB R2000SBM T-FHSS TELEMETRY PROTOCOL: R3001SB R3004SB R3006SB R3008SB CGY760R T-FHSS MONO (NON-TELEMETRY): R3206SBM R3106GF FASST7 AND FASST MULTI: R6004FF R6008HS R6014HS R6016HF R616FFM R617FS R6202SBW R6203SB R6208SB R6303SB R6303SBE FASSTest12 and FASSTest18: R7003SB R7006SB R7008SB R7108SB R7014SB R7208SB R7308SB CGY760R

T16IZ-SUPER Radio Mode-2 - TX only - FASSTest, T-FHSS, S-FHSS

Futaba FP05003194-3

SANWA S.101A32971A - Sanwa M17S FH5 with RX493i Receiver with TX Battery installed

Futaba 05003231-3 - T10PX Black Edition Radio F-4G/SR/T-FHSS (TX-only)

SANWA S.101A33073A - Sanwa M17 FH5 Limited Pink with RX493i RX and TX Battery installed

SANWA S.101A33171A - Sanwa Radio Sanwa Exzes Z3 FH5 RX493i Receiver with TX Battery instal

FX-36 Radio, R7208SB receiver, w/o battery & charger

FUTABA FX-36 + R7208SB 2.4GHz FASSTest The Futaba FX36 is the flagship among the tray style transmitters and was designed for high level model flying and competition use. This transmitter style is popular across Europe and is often used in pattern and glider flying. This high quality transmitter is built to the highest standard and leaves nothing to be desired in terms of transmission reliability and functionality.The features and telemetry functions are almost identical to the well-known T18MZ and T14SG transmitters. This set uses Futaba's best quality stick units ST-57 (as used in the T18MZ) to give extremely precise control.You can transmit on FASST, FASSTest, T-FHSS and FHSS allowing you to pick the right receiver for your model. The menu navigation is clearly structured and can be quickly/easily operated via the large colour touch screen. In addition to the familiar functions of the T18MZ Futaba have added a new multicopter menu and the ability to use up to 9 different language options! The integrated SD card slot allows you to store model data and software updates for future helping to make the FX36 future-proof.T14SG, T16SZ, T18SZ, FX-22, FX-30 and FX-32 model memories are convertible to FX-36.The ergonomically arranged switches and encoders allow fatigue-free operation during long flights and the set includes 2 aluminium joystick extensions to adjust to the pilot if needed. Features: Professional 18-channel remote control system Ergonomic transmitter design Professional level stick units (ST-57) Extensive telemetry functions (Similar to T18MZ) New S.BUS functions Model selection, internal memory for 30 models (Expandable via SD card) 15 Character model / user names Modes switchable between FASST, FASSTest, S-FHSS or T-FHSS 9 Language menu navigation 4.3" Colour touch screen (480 x 272px) Telemetry with voice output via loudspeaker or optional headphones 6 Digital trims 6 Switches 2 Rotary dials 2 Linear sliders Graphical servo monitor that displays all servo paths with servo test function Future proof by updating capability via SD card Extensive timer functions Vibration alarm S.BUS port with power support, for programming and logging S.BUS 8 Flight conditions per model memory (like T18MZ) 10 Option mixes AFR 3 modes (Up to 17 points) 13 Wing types, 3 tail types & 8 swashplate options Fully equipped helicopter menu with swash ring, governor, servo travel and speed compensation, throttle limiter 3 curve modes for gas / pitch, up to 17 points possible Fully equipped sailor menu with 13 wing types, 3 tail units Extensive mixer selection for gliders and engine models (like T18MZ) Freely configurable teacher / student channel assignment Box Contents Transmitter FX36 2.4GHz FASSTest Receiver R7208SB 2.4 GHz FASSTest Switch with charging socket 2 Aluminium joystick extensions (M4 Thread) Neutralization stopper Screwdriver At this moment there is no printed manual - click on the download tab and download the manual in PDF format (English) Required Accessories Batteries, charger & servos (note, the manual says that TX battery is included but that is incorrect) Battery type needed: 5-cell NiMH / 2-cell LiPo / 2-cell LiFe Battery max dimensions: L146 x W46 x H18.5mm

Futaba 05003222-3 - T32MZ-WC Radio FASSest26, 1S LiPo, R7214SB

Futaba T32MZ-WC - World Champion Edition Radio with R7214SB receiver FASSTEST SYSTEM:The Futaba 32MZ transmitter adopted the bidirectional communication system “FASSTest”. Data from the receiver can be checked in your transmitter. FASSTest is a maximum 26 channels (linear 24 channels + switch 2 channels) 2.4 GHz dedicated system.CHANNEL EXPANSION (MULTIPROP FUNCTION):The multiprop function can be used by using the separately sold multiprop decoder MPDX-1. The multiprop function is a function that divides one channel into eight channels and extends the number of channels.Up to 2 x MPDX-1 can be used, and up to 32 channels can be expanded as follows: Linear channel – 14 channels (2 channels are used by multiprop function) ON/OFF channel – 2 channels Multiprop channel – 16 channels Multiprop channels have the following differences from normal linear channels: The resolution of the multiprop channel is lower than that of the linear channel. Operating multiple multiprop channels simultaneously may reduce the operation response of the multiprop channel. Multiprop channels can not use the mixing function. S.BUS2 SYSTEM:By using the S.Bus2 system multiple servos, gyros and telemetry sensors are easily installed with a minimum amount of cables.WINDOWS EMBEDDED COMPACT 7:T32MZ WC utilizes the world famous Microsoft Windows Embedded Compact 7, which offers outstanding dependability and valuable resources.COLOR LCD MAIN DISPLAY:T32MZ WC has a HVGA (640 x 240 pixels) full color backlit LCD touch screen. The screen is manufactured of a transflective construction which enables both indoor and outdoor visibility.COLOR LCD SUB DISPLAY:T32MZ WC has a color LCD sub-display. It will be possible to know telemetry information separately from the main display. The sub display uses a reflective LCD which provides good visibility even outdoors.MUSIC PLAY:The Futaba 32MZ WC transmitter can playback WMA (Windows Media Audio) files on a microSD Card. You can enjoy music by the internal speaker or stereo headphones from the earphone jack. A switch can be assigned to start/stop your music.VOICE RECORDING:You can record your own voice using the internal microphone and then play back commands assigned to certain switches. Recording time is 3 seconds maximum and 24 voice files can be stored.SECURE DATA (SD CARD):Model data, music files, voice files, and picture files can be stored on optional microSD card. The microSD card is also used when updating the software/features of the T32MZ WC.HIGH CAPACITY LITHIUM POLYMER BATTERY (6600 MAH):The high capacity Lithium Polymer battery gives you extended flight time.EDITING:The touch panel and two enter keys allows you to edit your model in the manner that is easiest for you.FUNCTIONS:The internal dual processors operate the many 32MZ functions and optimize the response time. Most of the mixing functions are operated by curves which give you very precise settings.STICKS:Dual ball bearings support each axis. And the magnetic detection type noncontact potentiometers was newly equipped. This allows for finer and more precise operation. Also, the throttle stick is an external screw adjustment, you can choose ratchet or spring self neutral.REPLACEABLE SWITCHES:You can replace 4 of the toggle switches on the right and left shoulder, with optional switches (two position, three position, and momentary etc.).VIBRATION FUNCTION:Low voltage and other alarms are generated by a vibration motor. Alarms or vibrations to be used can be selected by the owner.Including: T32MZ-WC Transmitter R7214SB Receiver LT1F6600B Lithium Polymer Battery and AC Adapter Switch Harness Tool Box (includes special jig for adjustment) Neck Strap Manual (Short version. Find full version here) NEW World champion double transmitter Case TX Specs: Operating system: 2-Stick, 26-Channels, 2.4 GHz FASSTest/FASST/T-FHSS/S-FHSS System Power Supply: 3.8 V L1F6600B Lithium-polymer battery Weight: 1126 g R7214SB Specs: FASSTest-2.4GHz system (26CH/18CH/12CH mode) S.BUS2 and S.BUS port and 14 channels for conventional system receiver Diversity Antennas Dual RX-RX Capable Extra External Voltage Port Size: 50.2x37x15.9mm Weight: 19g Power requirement: 3.7-7.4V Voltage range: 3.5-8.4V Battery F/S Voltage: It sets up with a transmitter Extra Voltage port: 0 ~ 70V DC Features: Sub-display Lightweight lithium polymer battery Micro USB charging Transmitter equipped with GPS Non-contact potentiometer Highly rigid resin stick Stick mode switching function New receiver with high gain antenna Adopts Windows®CE Built-in GPS Monitor LED Switch lever replaceable type Left and right slide lever (S/ST) Digital trim Touch panel Edit button SD card slot Equipped with LT1F6600B lithium polymer battery for transmitter Tool box User name registration/character input Music playback Trainer DLPH-2 settings new features Receiver settings new function S.BUS servo setting Servo ID list display new function Image Sound Sub trim Balance new feature Reverse Fail safe End point

Futaba 05003220-3 - T32MZ-WC Radio FASSTest26, 1S LiPo, R7208SB

Futaba T32MZ-WC - World Champion Edition Radio with R7208SB receiver FASSTEST SYSTEM:The Futaba 32MZ transmitter adopted the bidirectional communication system “FASSTest”. Data from the receiver can be checked in your transmitter. FASSTest is a maximum 26 channels (linear 24 channels + switch 2 channels) 2.4 GHz dedicated system.CHANNEL EXPANSION (MULTIPROP FUNCTION):The multiprop function can be used by using the separately sold multiprop decoder MPDX-1. The multiprop function is a function that divides one channel into eight channels and extends the number of channels.Up to 2 x MPDX-1 can be used, and up to 32 channels can be expanded as follows: Linear channel – 14 channels (2 channels are used by multiprop function) ON/OFF channel – 2 channels Multiprop channel – 16 channels Multiprop channels have the following differences from normal linear channels: The resolution of the multiprop channel is lower than that of the linear channel. Operating multiple multiprop channels simultaneously may reduce the operation response of the multiprop channel. Multiprop channels can not use the mixing function. S.BUS2 SYSTEM:By using the S.Bus2 system multiple servos, gyros and telemetry sensors are easily installed with a minimum amount of cables.WINDOWS EMBEDDED COMPACT 7:T32MZ WC utilizes the world famous Microsoft Windows Embedded Compact 7, which offers outstanding dependability and valuable resources.COLOR LCD MAIN DISPLAY:T32MZ WC has a HVGA (640 x 240 pixels) full color backlit LCD touch screen. The screen is manufactured of a transflective construction which enables both indoor and outdoor visibility.COLOR LCD SUB DISPLAY:T32MZ WC has a color LCD sub-display. It will be possible to know telemetry information separately from the main display. The sub display uses a reflective LCD which provides good visibility even outdoors.MUSIC PLAY:The Futaba 32MZ WC transmitter can playback WMA (Windows Media Audio) files on a microSD Card. You can enjoy music by the internal speaker or stereo headphones from the earphone jack. A switch can be assigned to start/stop your music.VOICE RECORDING:You can record your own voice using the internal microphone and then play back commands assigned to certain switches. Recording time is 3 seconds maximum and 24 voice files can be stored.SECURE DATA (SD CARD):Model data, music files, voice files, and picture files can be stored on optional microSD card. The microSD card is also used when updating the software/features of the T32MZ WC.HIGH CAPACITY LITHIUM POLYMER BATTERY (6600 MAH):The high capacity Lithium Polymer battery gives you extended flight time.EDITING:The touch panel and two enter keys allows you to edit your model in the manner that is easiest for you.FUNCTIONS:The internal dual processors operate the many 32MZ functions and optimize the response time. Most of the mixing functions are operated by curves which give you very precise settings.STICKS:Dual ball bearings support each axis. And the magnetic detection type noncontact potentiometers was newly equipped. This allows for finer and more precise operation. Also, the throttle stick is an external screw adjustment, you can choose ratchet or spring self neutral.REPLACEABLE SWITCHES:You can replace 4 of the toggle switches on the right and left shoulder, with optional switches (two position, three position, and momentary etc.).VIBRATION FUNCTION:Low voltage and other alarms are generated by a vibration motor. Alarms or vibrations to be used can be selected by the owner.Including: T32MZ-WC Transmitter R7208SB Receiver LT1F6600B Lithium Polymer Battery and AC Adapter Switch Harness Tool Box (includes special jig for adjustment) Neck Strap Manual (Short version. Find full version here) NEW World champion double transmitter Case TX Specs: Operating system: 2-Stick, 26-Channels, 2.4 GHz FASSTest/FASST/T-FHSS/S-FHSS System Power Supply: 3.8 V L1F6600B Lithium-polymer battery Weight: 1126 g R7208SB Specs: FASSTest-2.4 GHz system(18 ch/12 ch mode) S.BUS2 and S.BUS port and 8 channels for conventional system receiver Dual antenna diversity Size: 24.9x38.8x14.3mm Weight: 9.9g Power requirement: 3.7-7.4V (Voltage range: 3.5-8.4V) Battery F/S Voltage: It sets up with a transmitter Extra Voltage port: 0 ~ 70V DC Features: Sub-display Lightweight lithium polymer battery Micro USB charging Transmitter equipped with GPS Non-contact potentiometer Highly rigid resin stick Stick mode switching function New receiver with high gain antenna Adopts Windows®CE Built-in GPS Monitor LED Switch lever replaceable type Left and right slide lever (S/ST) Digital trim Touch panel Edit button SD card slot Equipped with LT1F6600B lithium polymer battery for transmitter Tool box User name registration/character input Music playback Trainer DLPH-2 settings new features Receiver settings new function S.BUS servo setting Servo ID list display new function Image Sound Sub trim Balance new feature Reverse Fail safe End point (ATV) Throttle cut Idol Down Swash

T7XC Stick Radio - with R334SBS

Futaba T7XC Stick Radio for Cars & Boats The T7XC was developed for car/boat modellers who want a premium stick style radio. The technology inside is largely based on the well known T7PX with some new features and a stylish new ergonomic shape.The case is made from high quality moulded plastic and finished in a deep satin black, accented by chrome mouldings and switches. The huge 4.3" colour touch screen has a 'transflective' surface for great visibility indoors and outdoors. The touch screen is easy to use and responds quickly to the touch.Using Futaba's fastest technology (T-FHSS SR) the response has a ultra-fast frame rate of 2.45 milliseconds! This new system brings in a locked in feel and response that racers and performance drivers will truly appreciate. The T7XC is also compatible with Futaba T-FHSS, S-FHSS and FASST systems so you can select the preferred transmission system for each vehicle to suit your requirements. With T-FHSS telemetry data can be displayed on the screen or relayed by a synthesized voice using the built-in speaker or headphones (not included).The T7XC software is updateable using an SD card but it also has NFC (Near Field Communication) which allows you to update the radio from an android phone just by opening an APP and placing it next to it!Full Colour Touch Screen LCDRight in the center the T7XC has a HVGA 4.3", full-colour, backlit LCD touch screen. The screen is transflective to improve both indoor and outdoor visibility.T-FHSS SR (Super Response) & Telemetry T-FHSSIn addition to the T-FHSS telemetry system, the T7XC has the new T-FHSS SR (Super Response) system with an ultra-fast processing speed to further improve control response. (Note: The SR system does not support telemetry function)Updateable SoftwareThe T7XC software can be updated easily using a microSD card. You can also save your model data to a microSD card and even save your telemetry log data.40 Model MemoryThe T7XC has 40 model memories and each can use names with up to 15 letters, numbers or symbols. You can even copy a model memory and modify the setup for different applications using the built in model copy function.NFC communicationThe technology is installed to allow future updates to be installed on the T7XC using NFC (Near Field Communication) with a compatible phone.Integral Type Dial SwitchA switch with both dial (DL1) and switch (SW6) function are combined into one smart unit.Brake Mixing for Large CarsThere is a built in brake mixing function allowing you to adjust bias between the front and rear wheels of 1/5 GP and other large cars with lots of adjustability.Steering MixSmooth cornering is also possible by mixing independent left and right steering servos precisely.4WS Mixing for Crawlers and other 4WS CarsThis function is most popular on rock crawlers but ti is also suited to other 4-wheel steering vehicles.Dual ESC Mixing for CrawlersYou can control front an rear ESC independently in advanced rock crawlers.Gyro MixingThe sensitivity of Futaba car gyros can be adjusted from the T7XC directly.Tank MixingThis dual track mixing function is intended for vehicles such as tanks.CPS MixingLED lighting and flashing control using the Futaba CPS-1 channel power switch can be matched to steering and throttle operation using a switch.S.BUS Servo SettingsThis is a special S.BUS function allows you to adjust/set parameters of certain Futaba S.BUS servos.Throttle SpeedWith modern high performance RC cars the sudden application of power on a slippery road surface will only cause the tires to spin and reduce drive. This setting allows you to adjust the throttle speed setting to apply power smoothly and easily. It also helps to reduce battery consumption.Steering SpeedWhen you sense that a steering servo is too fast and you are loosing grip you can adjust the speed to help regain smooth control.Non-telemetry LEDA LED will light to alert to you that the telemetry function is OFF and not operating.Dial Select FunctionThis function allows you to assign specific functions to different controls (digital trim, dials or switches). You can also adjust the step (sensitivity) amount and change the operating direction.Trim/Dial Lock FunctionsYou can lock specific functions to prohibit accidental adjustment.Vibrator Built into the GripThe vibrator can be set to activate using the racing timer lap navigation, time-up, a telemetry alarm or low battery warning.Function List Display backlight brightness setting / dimming time setting / touch panel correction Information language setting / version information Sound setting (telemetry sound, alarm sound, operating sound) Battery type setting / auto power off Date and time setting / Displaying the time on the home screen or selecting the total timer LED Setting Steering wheel and throttle trigger calibration Software update with NFC Receiver update using Tx (R334SBS / R334SBS-E) Model select Model memory copy Model memory name (set / modify) Delete model data in SD card Data