Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Vi er 100% dedikerede til Google Annoncering – Vi har mange års erfaring med Google Ads og den bruger vi på at opsætte, optimere & vedligeholde vores fantastiske kunders konti.

100% Specialiseret i Google Ads
Vi har mange års erfaring fra +300 konti
Ingen lange bindinger & evighedskontrakter
Jævnlig opfølgning med hver enkelt kunde
Vi tager din virksomhed seriøst
KONTAKT OS
LÆS UDTALELSER & SUCCESHISTORIER

20 results (0,16853 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

DeWalt DT4772 Extreme Impact Flat Drill Bit 26 x 152mm

DeWalt DT4772 Extreme Impact Flat Drill Bit 26 x 152mm

Dewalt DT4772 Extreme Impact Flatwood Drill Bit 26mm x 152mm The Dewalt DT4772 drill bits are designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and champered outer cutting spurs for razor sharp, clean precise drilling. Features: Ideal for door locks, electrical and plumbing work Specification: Cutting Diameter: 26mm Length: 152mm Pack Quantity: 1

GBP 5.29
2

DeWalt Wood Auger Drill Bit 26 x 200mm DEWDT4618QZ

DeWalt Wood Auger Drill Bit 26 x 200mm DEWDT4618QZ

DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.

GBP 24.99
1

DeWalt D25133K-GB 26MM 800W SDS+ Hammer Drill 240V

DeWalt D25133K-GB 26MM 800W SDS+ Hammer Drill 240V

D25133K Ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26 mm in diameter. Rotation-stop for light chiselling applications in brick, soft masonry and occasionally concrete. Impact-stop for drilling in wood, steel, ceramic and screwdriving applications. Mechanical clutch eliminates sudden high-torque reaction should the bit jam. Electronic variable speed for total control in any application. Ergonomic rubber coated back handle design for improved comfort in use. Output air slots designed to protect users' eyes. Improved sealing for maximum protection from dust ingress ensuring long tool life.

GBP 149.99
1

DeWalt DCF887N XR Brushless 3 Speed Impact Driver 18V Bare Unit DEWDCF887N

DeWalt DCF887N XR Brushless 3 Speed Impact Driver 18V Bare Unit DEWDCF887N

The DEWALT DCF887 XR Brushless Impact Driver is equipped with application control, this is achieved through 3 motor speeds, and torque settings. While Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. The Impact Driver is fitted with a high power, brushless motor capable of outputting up to 205Nm of torque, ensuring heavy applications are completed quickly. The DCF887 XR also has a super lightweight and compact design very comfortable to use, fitting in small spaces. The 3 LED, Halo light ring offers excellent workplace lighting. Specifications; Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max. Torque: 26/80/205Nm.Weight: 1.56kg.

GBP 69.99
1

DeWalt DCF887P2 XR Brushless 3 Speed Impact Driver 18V 2 x 5.0Ah Li-ion DEWDCF887P2

DeWalt DCF887P2 XR Brushless 3 Speed Impact Driver 18V 2 x 5.0Ah Li-ion DEWDCF887P2

The DEWALT DCF887 XR Brushless Impact Driver is equipped with application control, this is achieved through 3 motor speeds, and torque settings. While Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. The Impact Driver is fitted with a high power, brushless motor capable of outputting up to 205Nm of torque, ensuring heavy applications are completed quickly. The DCF887 XR also has a super lightweight and compact design very comfortable to use, fitting in small spaces. The 3 LED, Halo light ring offers excellent workplace lighting. Specifications; Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max. Torque: 26/80/205Nm.Weight: 1.56kg.

GBP 199.99
1

DeWalt DCS331N 18V XR Pendulum Jigsaw (Body Only)

DeWalt DCS331N 18V XR Pendulum Jigsaw (Body Only)

This Dewalt jigsaw has a 45? bevel capacity and is capable of cutting up to 135mm in wood The DCS331 is the latest generation premium Jigsaw featuring new XR Lithium Ion Technology. The new and improved ergonomic design increases user comfort for use all day long and dust blower helps keep the line of view clear for precision every time. It features a 3-position pendulum action that controls the aggressiveness or smoothness of cuts, depending on the application. This Jigsaw is much loved by many satisfied tradesmen and customers. Here is a selection of their comments on Reevoo: "I regularly cut 2mm sheet metal. Always used a mains powered unit. This jigsaw not only manages the job but does it better than my mid-range 240V jigsaw. Very impressed." " A very good jigsaw copes with everything, easy to use and very robust. Perfect for daily use on site. All the knobs are big, easy to see and use. Has loads of constant power, just as much as most expensive corded jigsaws." Features: Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster Powerful & Highly efficient Dewalt PM47 fan-cooled motor with replaceable brushes. delivers fast cutting action up to 3000 strokes per minute maximising user productivity Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety Tool-free adjustable shoe with anti-scratch cover bevels 45? in both directions Quick and easy patented keyless blade change system, accepts T-shank blades Patented anti-vibration counter-balance mechanism and rubber grip providing a smooth operation 3-position pendulum action controls the aggressiveness or smoothness of cuts Dust blower keeps the line of cut clear of dust and debris Modular component design for trouble free servicing Rubber coated grip to reduce surface vibration and user fatigue Improved ergonomic design Comes with: Dust port Anti-scratch shoe cover Batteries or charger are NOT included Specification: Power Output: 400 Watt No Load Stroke Rate: 0-3000 spm Stroke Length: 26 mm Bevel Capacity: 45? Weight: 2.4 kg Length: 305 mm Height: 215 mm Uncertainty K 1 (Vibration): 3.0 m/s_ Uncertainty K 2 (Vibration): 1.5 m/s_ Sound Pressure: 89 dB(A) Sound Power: 100 dB(A) Sound Power Uncertainty: 3.0 dB(A) Battery chemistry: XR Li-Ion Voltage: 18 V Max. Depth of Cut [Wood]: 135 mm Max. Depth of Cut [Metal]: 10 mm Sound Pressure Uncertainty: 3.0 dB(A) Hand/Arm Vibration - Cutting boards: 10.5 m/s_ Hand/Arm Vibration - Cutting sheet metal: 5.5 m/s_

GBP 133.99
2

DeWalt DCK266P2T XR Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK266P2T

DeWalt DCK266P2T XR Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK266P2T

The DEWALT DCK266P2T Twin Pack, contains the following: 1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/0-34,000/min.Max Torque: 70Nm.Capacity: Wood 40mm, Steel 13mm, Masonry 13mm. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Voltage: 10.8/14.4/18V.Battery Chemistry: Li-ion.Charging Current: 4.0 A. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x TSTAK II Toolbox.

GBP 299.99
1

DeWalt DCK266P2 XR Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK266P2

DeWalt DCK266P2 XR Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK266P2

The DEWALT DCK266P2 XR Brushless Twin Pack, contains the following 1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screw driving. Chuck 13mm Keyless. No Load Speed 0-550/0-2,000/min. Impact Rate 0-9,350/3,4000/bpm Torque 27/70Nm, 15 Settings. Capacity Steel 13mm, Masonry 13mm, Wood 40mm 1 x 18V DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. No Load Speed 0-850/0-2,100/0-3,000/min. Impact Rate 0-1,800/0-2,900/0-3,700/bpm. Torque 26/80/203Nm. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8V, 14.4V, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x TOUGHSYSTEM DS150 Toolbox.

GBP 329.99
1

DeWalt DCK276P2 Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK276P2

DeWalt DCK276P2 Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK276P2

The DEWALT DCK276P2 Brushless Twin Pack, contains the following 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck 13mm Keyless. No Load Speed 0-450/0-1,300/0-2,000/min. Impact Rate 0-8,600/0-25,500/0-38,250/bpm. Max Torque 95Nm, 11 Settings. Capacity Wood 55mm, Steel 15mm, Masonry 16mm Weight 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder 6.35mm (1/4in). No Load Speed 0-850/0-2,100/0-3,000/min. Impact Rate 0-1,800/0-2,900/0-3,700/bpm. Max Torque 26/80/203Nm. Weight 1.56kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS150 TOUGHSYSTEM Toolbox.

GBP 359.99
1

DeWalt DCK276T2T FlexVolt XR Twin Pack 18V 2 x 18/54V 6.0/2.0Ah Li-ion DEWDCK276T2T

DeWalt DCK276T2T FlexVolt XR Twin Pack 18V 2 x 18/54V 6.0/2.0Ah Li-ion DEWDCK276T2T

The DEWALT DCK276T2T FlexVolt Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless.No Load Speed: 0-450/0-1,300/0-2,000/Min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/Min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18-54V DCB116 FlexVolt XR Fast Charger that will charge 54V FlexVolt and 18V XR batteries. A bright LED indicator communicates battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It has a compact design that is wall mountable and fan cooled so it can charge efficiently between 4C and 40C. Also supplied with: 2 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries, 2 x Belt Hooks, 1 x Side Handle for Combi Drill and 1 x DWST1-71195 TSTAK Deep Toolbox.

GBP 759.99
1

DeWalt DCK368P3T XR Brushless Kit 18V 3 x 18V 5.0Ah Li-ion DEWDCK368P3T

DeWalt DCK368P3T XR Brushless Kit 18V 3 x 18V 5.0Ah Li-ion DEWDCK368P3T

The DEWALT DCK368P3T XR Brushless 3 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Compact Combi Drill which has an ultra compact, lightweight design. The two speed all metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel 13mm, Masonry 13mm, Wood 40mm.Weight: 1.3kg. 1 x 18V DCF887 XR Brushless Impact Driver that is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18V DCH273 Brushless XR 3 Mode SDS Hammer fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mm.Weight: 3.1kg. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger which has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Also supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x TSTAK II Toolboxes.

GBP 599.99
1

DeWalt DCK690P3T XR Brushless 6 Piece Kit 18V 3 x 5.0Ah Li-ion DEWDCK690P3T

DeWalt DCK690P3T XR Brushless 6 Piece Kit 18V 3 x 5.0Ah Li-ion DEWDCK690P3T

The DEWALT DCK690P3T XR Brushless 6 Piece Kit contains the following: 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Torque: 27/70Nm, 15 Settings.Capacity: Masonry/Steel 13mm, Wood 40mm. 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 joules.Capacity: Masonry: 24mm, Metal: 13mm, Wood: 26mm.Weight: 3.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm .No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max. Torque: 26/80/205Nm.Weight: 1.56kg. 1 x 18V DCS565 XR Brushless Circular Saw has an extremely durable design, including a cast aluminium base for repetitive, accurate cuts. With optimum balance for safe, fatigue-free operation. A lock-off switch and electronic motor brake provide additional control and work safety. The dust blower and LED work light provide improved cut line visibility. No Load Speed: 4,950/min.Max. Cutting Depth: @45 42mm, @90 55mm.Bevel Capacity: 50.Blade Diameter x Bore: 165 x 20mm.Weight: 2.8kg . 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. The quick and easy keyless blade change system accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover that bevels to 45 in both directions. The dust port is AirLock compatible. Strokes at No Load: 0-3,200/min.Stroke Length: 26mm.Bevel Capacity: 0-45.Capacity: Metal 10mm, Wood 135mm.Weight: 2.1kg. 1 x 18V DCL040 XR LED Torch with a compact, lightweight design and an ergonomic, rubber grip for increased comfort. Impact resistant housing provides increased durability. The LED bulb produces a two zone light pattern. Its head pivots more than 90 vertically with a ratchet lock. Light Output: 110 lumens. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Also supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x TSTAK Deep Toolboxes.

GBP 999.99
1

DeWalt DCK623P3 18V XR Brushless Kit, 6 Piece DEWDCK623P3

DeWalt DCK623P3 18V XR Brushless Kit, 6 Piece DEWDCK623P3

The DEWALT DCK623P3 XR Brushless 6 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The 2 speed, all metal transmission, provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max. Torque: 27/70Nm, 15 Settings.Capacity: Steel 13mm, Masonry 13mm, Wood 40mm.Weight: 1.3kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max. Torque: 26/80/205Nm.Weight: 1.56kg. 1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kickback reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 1.75kg. 1 x 18V DCS367 Brushless XR Reciprocating Saw has a compact design that allows for better access to hard to reach cuts. Offers improved balance and ease of handling due to central motor position. The 4 position blade clamp allows for flush cutting and improved versatility. There is a lever action keyless blade clamp for tool-free blade change and an LED work light for improved visibility of cut. No Load Speed: 0-2,900/min.Stroke Length: 28.6mm.Capacity: Wood 300mm, Steel Sections & Pipes 100mm, PVC 160mm.Weight: 2.3kg. 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe 2 handed work. No Load Speed: 5,500/min.Max. Cutting Depth @90: 64mm.Blade: 184 x 16mm Bore.Bevel Capacity: 57. 1 x 18V XR Handheld LED Work Light is perfect for inspecting areas without electricity or natural light. Fitted with variable light settings for maximum brightness or extended runtime and a 250-500 lumen output with broad and even beam pattern. The articulating head has 9 positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use. Bulb Type: LED.Light Output: 250-500 lumens.Protection Class: IP54. Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Charger and 2 x TOUGHSYSTEM DS300 Toolboxes.

GBP 899.99
1

DeWalt DCK755P3T XR Brushless 7 Piece Kit 18V 3 x 5.0Ah Li-ion DEWDCK755P3T

DeWalt DCK755P3T XR Brushless 7 Piece Kit 18V 3 x 5.0Ah Li-ion DEWDCK755P3T

The DEWALT DCK755P3T XR 7 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Torque: 27/70Nm, 15 Settings.Capacity: Steel 13mm, Masonry 13mm, Wood 40mm. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max. Torque: 26/80/205Nm.Weight: 1.56kg. 1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg 1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. No Load Speed: 5,500/min.Max. Cutting Depth: @90 64mmBlade: 184 x 16mm BoreBevel Capacity: 57 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45 in both directions. The dust port is AirLock compatible. Strokes No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45Capacity: Wood 135mm, Metal 10mmWeight: 2.1kg Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 2 x TSTAK VI Deep Toolboxes (171195), 1 x TSTAK II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK Carrier Base (171229)

GBP 1199.99
1