signal strik fra NOK 936 | Se de billigste prisene og tilbud på css.nordicadpartner.dk

Elma Instruments Elma 2000x - cat iv voltage tester - Instrumenter

Elma 2000X is the market's smartest voltage tester. The second generation has improved in several aspects, including smart fastening test pens, with accurate distance between them, so that they fit directly into the wall outlet. The test probes has both 2 and 4mm diameter, which ensures good connection. Elma 2000X has many extra features that makes everyday work easier and safer. The instrument is fully automatic, switching between the different functions and can not fault controlled. - Voltage Test - 2 pole with LED indication 12-690 V AC / DC - Phase indicator - a voltage test indicates phase with LED and audible signal - Phase rotation test - 2-poled 3-phase networks - Continuity test - With LED and audible signal - Built-in lighting - Ideal when working in dark locations - High safety - IEC 61010-1 CAT IV, double insulated, IP 65, EN 61243-3 Class B - Suitable for Laus-work , Elma 2000A is equipped with practical highly flexible cord has a protective cover and is delivered incl. Danish manual and standard batteries. Voltage indication also works without batteries. Technical data: Voltage indication: 12, 24, 50, 120, 230, 400 and 690V AC / DC Test current:

NOK 936.00

1

Elma Instruments Regrigerant leak detector rld4 - Instrumenter

Air sucking System for faster response and higer sensitivity Microprocessor Control with advanced digital signal processing. Semiconductor gas sensor. High / Mid / Low Leak Sensitivity Selector R-22, 134a Hi : 3g/year , Mid : 15g/year , Lo : 30g/year R-404A, 407C, 410A Hi : 4g/year , Mid : 20g/year , Lo : 40g/year 7 LED Tri-colored Visual Leak Level Indicator Ambient Concentration Reset Warm-up Time: 45 seconds Snake Tube Length: 400mm (15.5) flexible stainless probe Auto power Off: 10 minutes Ambient Concentration reset. Equal Sensitivity to CFCs, HCFCs and HFCs. Low battery indication. Reference Leak source included. Hard Carrying case included.

NOK 4090.00

1

Elma Instruments Elma dt-128m moist meter - Instrumenter

Elma DT-128M gir en veldig rask måte å ikke-destruktiv måling av fuktighet i byggematerialer og fuktdistribusjon i for eksempel vegger, tak og gulv. Instrumentet injiserer et høyfrekvent signal i materialet og måler fukten 20-40mm n i materialet. Bare hold ballspissen mot overflaten, så vises fukten umiddelbart på den store, bakbelyste skjermen. Elma DT-128M er utstyrt med 2 justerbare alarmgrenser, automatisk nulljustering, min / maks-, automatisk avstenging og displayhold. Instrumentet leveres klart til bruk inkludert batterier og manual. Merk: Materialet som skal måles bør være minst 20-40 mm (avhengig av materialet) for å gi en lesning.

NOK 2466.00

1

Elma Instruments Kyoritsu 2300r mini clamp meter - Instrumenter

Kyoritsu 2300R er verdens første sanne RMS AC/DC klemmemeter med en åpen klemme. Instrumentet kan, på grunn av sine smale klammer, brukes overalt - selv i tavler der ledningene sitter veldig tett sammen. Kyoritsu 2300R måler sanne RMS AC/DC-strømmer opptil 100 A og er utstyrt med datahold, automatisk avstenging, automatisk nulljustering og ikke-kontakt spenningsindikasjon. Spenningsindikasjonen gir et akustisk signal når klemmen er nær en hvor spenningen er over ca. 80V. Instrumentet oppfyller IEC 61010-1 CAT III 300V og leveres i en pose inkludert batterier og manual. Tekniske data: Strøm: 0,1-100A AC/DC Oppløsning: 0,1 Nøyaktighet: ±2%+5D Display:3½ sifre Maks visning:1049 Klampestørrelse :10 mm Batteri :2x1,5V LR03 (inkl.) Størrelse :161x40x30 mm Vekt :110 g

NOK 2572.00

1

Elma Instruments Metrel mi2093 line tracer - Instrumenter

Metrel MI2093 Line Tracer is a complete cable tracer kit, for tracing on hidden cables and wires. The kit consists of a transmitter unit, which can be used on installations with and without present voltage, and a receiver with adjustable sensivity. The transmitter is forced by batteries and can be used to trace/follow cables both with and without voltage. Line Tracer will easily find a disconnected wire, plugs, sockets and more. If you connected to a cable with present voltage is it possible to follow/identify the cable throughout the net supply. The tracer will indikate if it is working on an installation with or without voltage, and if the battery voltage is to low. The receiver indicates how strong a signal it will catch reflected by diods og by sound signals. On the receiver is it possible to choose between three levels of sensivity, this will secure a more accurate tracing. With the special designed selective/high sensitive probe, you are able to identify fuses in boards

NOK 8866.00

1

Elma Instruments Elma bm 821 multi meter with pc communication cat iv - Instrumenter

Elma BM 821 is a new accurate and robust category IV 1000V multi meter, which, due the high safety is suitable for measurement in all of the installation. Elma BM 821 is equipped with a large bright 4 digits double display and fast analogue bar graph. The instrument is measuring voltage, current, frequency, resistance, capacity, diodes and continuity. Elma BM 821 has a lot of extra functions e.g. data hold, auto shut-off, automatically/manually range selection and RS232 port for PC-communication. With the PC-communication and the Windows software (orders separately), is it possible to make online data logging, where all the measured data can be viewed as: Digital display, analogue display, curve/graph and table. The instrument is UL listet, comply with IEC 61010-1 CAT IV 1000V and is equipped with high efficiency fuses with control function. Elma BM 821 is delivered incl. manual, battery, test leads and a robust rubber protection cover. Technical data:Voltage: 0-100m-1000m-10-100-1000V AC/DC Accuracy: DC: ± 0,08%+2D, AC: ± 0,5%+3D Current: 0-600-6000-60m-600m-6-10A AC/DC Accuracy: DC: ± 0,2% + 4D, AC: ± 0,6% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Capacity: 0-60n-600n-6-60-600-6000-27mF Frequency: 10 - 100 kHz Diode test: 0-2000mV, 0,4mA < 3,5V DC Continuity test: < 10 acoustical signal Display: 4 og 3 5/6 digits Max. display: 9999 or 5999 Battery: 1x9V 6F22 (incl.) Size: 208 x 103 x 64,5 mm Weight: 635 g

NOK 2537.00

1

Elma Instruments Elma 6600 automation multimeter - Instrumenter

Elma 6600 prosessmultimeter er et uunnværlig instrument for enhver tekniker som jobber med kontroll og automatisering. Siden Elma 6600 både er en kalibrator på 0-24mA og en standard multimeter, egner instrumentet seg både til å levere et automatiseringskretsløp med et justerbart mA-signal og måle når du trenger en vanlig multimeter - perfekt for feilsøking. Elma 6600 leveres med stor LCD-skjerm med lys, som automatisk slås på når du jobber i mørke omgivelser. Når den brukes som kalibrator, har instrumentet tre hovedfunksjoner: Levere en passiv strømloop på 0-24.000mA (intern batteriforsyning 4,5V) Simulere en to-tråds sender i en aktiv strømloop på 0-24.000mA (ekstern forsyning fra6...48V) Levere strøm til senderen og overvåke strømmen i løkken (Løyfestrøm:24V/20mA) Elma 6600 har mange ekstra funksjoner som gjør at instrumentet egner seg godt til feilsøking av kontroller og applikasjoner.Teststrømmen kan settes enten ved låst verdi fra (00)-24000 mA eller kjøre syklusprogrammering.Four programmed cycles are available with different scan/ramp intervals to select the one most suitable for your application.Elma 6600 er også et multimeter med alle funksjonene man kan forvente av et standard multimeter, som spenning, strøm, motstand, frekvens og kontinuitet med summer og diodetest. Instrumentet støtter også auto / manuell rekkevidde min / max / avg. Og hold / relativ. Den innebygde hukommelsen kan lagre 100 målinger. Etterpå kan målingene vises på skjermen eller overføres til PC-en.Kabel og programvare følger med instrumentet.Elma 6600 oppfyller IEC 61010-1 Cat IV 600V.Instrumentet leveres klar til bruk, med batteri,testledninger,krokodilleklemmer ,programvare og USB-kabel,håndbok og en stropp for å henge instrumentet slik at du har begge hendene fri.

NOK 8585.00

1

Elma Instruments Easytest protect ke401 trace probe set - Instrumenter

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest Protect test kit is a further development of the known Easytest Classic Kit (desciption above). The instrumentet is having a lot of new functions eg. is it possible to see if data ports is connected. With the trace probe is it possible to detect ISDN/ADSL lines. Easytest Protect emits a sine signal with can cause in reduced "Crosstalk", and it is therefor possible to trace on live telephone cables. Easytest Protect can be connected through the integrated RJ 11, RJ 45 or ther included crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery probe: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight probe: 220 x 40 x 25 mm / 80 g

NOK 3962.00

1

Elma Instruments Elma 2100x - cat iv voltage tester with digital display - Instrumenter

Elma 2100X IS A NEW unique voltage-/continuity tester for extra high safety and with a lot of smarte details. Like: long flexible wire, smart fixed connection of the test probes with a distance so that they fits directly into a socket. Test probes with both 2 and 4mm diameter and integrated Protection cap. Elma 2100X has both a digital display, LED s and a lot of extra features, which makes the worh a lot more easy, and more safe. The instrument has automatically switching between the different funktions, and the voltage detection does also work without batteries. Voltage test, 2 pole with LED s (12-690V AC/DC) Voltage measurement with digital displaying (7-800V AC/DC) Voltage detector, one-pole voltage test which indicates the phase Fase sequence test, 2 pole for 3 phase supply Continuity test with LED and acustical signal Real voltage test also without battery Automatical self test function. Automatical On/Off - no buttons. Build-in extra powerfull flashlight. Double insulated, IP65, GS passed and cat IV 600V. Elma 2100X is delivered incl. standard LR03 batteries and complies with IEC 61243-3, EN 61010-1 cat. IV 600 and TUV/GS. The testers are IP65, person protected up to 690V earth potential and double insulated. TECHNICAL DATA Voltage range indication: 12, 24, 50, 120, 230, 400 og 690V AC/DC Digital displaying: 7,0 - 800/720V AC/DC Test current: < 3,5mA Voltage detector: 100-690V AC Continuity: 0-400 k Phase sequence: 2 pole principle, 200-690V 50/60Hz Working temperature: -15...55°C Safety: IEC 61010-1 CAT IV 600V / CAT III 1000V. IEC 61243-3 / 61010-031 / 61557-7, TUV/GS, double insulated Protection class: IP65 Wire: Silikone Battery: 2x1,5V LR03 (inkl.) Size: 246 x 64 x 29mm Weight: 190g

NOK 1569.00

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Merke

Farge

Butikk

Pris (EUR)