saphe one fra NOK 831 | Se de billigste prisene og tilbud på css.nordicadpartner.dk

Tilta Handgrip extension arm (one pair) - Foto Videotilbehoer

These hand grip extension arms have angled Arri Standard Rosettes that allow you to create more space and comfort while operating on one of the various Tilta shoulder mount systems.

NOK 2616.00

1

Tilta Pro Articulating Arm Black - Foto Videotilbehoer

This articulating arm is the perfect option for mounting accessories to your camera cage such as external monitors, wireless video transmitters, electronic viewfinders and more. The articulating nature of this arm along with a single tie down lock for all axes means users can easily re-position accessories on the fly which is especially helpful in fast paced shooting environments. Weighing in at only 11oz, this arm can support up to 11lbs which makes it the strongest articulating arm in our current lineup. The arm comes in two variations, one that features two NATO Receivers on each end and one that features two 1/4?-20 screws with locating pins .

NOK 1298.00

1

Tilta Quick-release shoulder pad - Foto Videotilbehoer

The Universal Quick Release Shoulder Pad is fast and convenient. It allows for any camera with either a Tilta standard or Arri standard baseplate to slide and lock in for run-and-gun shoulder mounted set-ups without the need to screw on additional baseplates. It comes with two dovetail-style plates: one that is Tilta standard and one that is Arri standard so depending on your plate system, you can have your normal dovetail attached to your tripod and then quickly and easily slide off of that and onto the shoulder pad?s plate to be ready for handheld in no time. The pad is sturdy and firm yet very comfortable during operation.

NOK 6454.00

1

Tilta Battery Plate for DJI Video Transm. (Female) - Kamerabatteri Batterigrep

This Battery Plate serves as a replacement for the one included in the Power Supply Module for DJI Transmission. This plate can be installed onto the DJI Video Transmitter or Receiver and allows you to mount a V-Mount battery to the unit. This can provide power as well as pass power through the module to the camera body when used with the other plate from the original kit. (not included) This is a fantastic option for those who are looking for a clean and convenient way to mount and power the DJI Transmission System. NOTE: These Plate can only mount to the transmitter in one configuration which will position the SDI ports on the Operators side and the LCD Screen/Control Knob on the Assistant’s side.

NOK 1864.00

1

Tilta Nucleus-M P-TAP to 7-Pin Motor Power Cable - Foto Videotilbehoer

This P-tap to 7-pin cable for the Nucleus-M allows you to power the motors from a P-tap power output port. Simply plug this cable into one of the motors and then daisy chain power to the other motors using the Nucleus-M 7-pin to 7-pin power cables.

NOK 1956.00

1

Tilta Full Camera Cage For Sony a7C Black - Foto Videotilbehoer

- Retains access to the camera shoe mount, ports, battery, and display - Multiple 1/4"-20 accessory threads - 1/4"-20 camera mounting screw - Removable Manfrotto-style plate fits Manfrotto-compatible baseplates - 1/4"-20 mounting threads on the bottom for tripod mounting - One integrated shoe mount - Integrated single rod port for optional Tilta single-rod mount - Aluminum and steel construction

NOK 1776.00

1

Tilta Nucleus-M Wireless Lens Control System Partial Kit III - Foto Videotilbehoer

Tilta Nucleus-M Wireless Lens Control System Partial Kit III The Tilta Nucleus-M Wireless Lens Control System Partial Kit III contains the essential elements for pulling focus wirelessly while handholding. The kit includes the Nucleus-M left handgrip controller, one Nucleus-M motor, one removable lens belt, two motor power cables, and a battery charger unit (batteries not included). The handgrip controller provides wireless fingertip lens control while functioning as handgrip support for your camera rig, and the system enables pulling either focus, iris, or zoom on your lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens. This partial kit is a single axis system, but the Nucleus-M left handgrip controller will allow you to control additional motors (not included) so you can control more than one lens ring. The included motor power cables allow you to power a motor from either a D-Tap power source or a second motor via the 7-pin to 7-pin connector. The included power cables allow you to easily add a second motor (not included) to the system. The included rosettes aid in mounting the handgrip controller to your camera or rig with ARRI-style rosettes. The system can wirelessly pull focus from up to 1000' away, and with separately available batteries you can power the hand unit for approximately 10 hours on a single charge.

NOK 12361.00

1

Tilta G series Rosette Extension Splitter - Foto Videotilbehoer

Use this Rosette Mount Splitter to divide one of the Arri Standard Rosettes on the sides of the Gravity G1, G2, and G2X into two. CNC-milled from high grade aluminum-alloy, the support provided by the splitter is both strong and lightweight. When used in conjunction with the Monitor Bracket or Accessory Mounting Bracket, limitless accessory mounting configurations are possible especially with a Rosette Mount Splitter on either side of the gimbal!

NOK 1674.00

1

Tilta - ing Fujifilm X-T3/XT-4 Kit A Black Version - Foto Videotilbehoer

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras. It provides several 1/4”-20 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup. This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, as well as a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4). Compatible with Type II Baseplates and Type I Side Handles.

NOK 3148.00

1

Tilta - ing Fujifilm X-T3/XT-4 Kit A Grey - Foto Videotilbehoer

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras. It provides several 1/4”-20 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup. This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, as well as a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4). Compatible with Type II Baseplates and Type I Side Handles.

NOK 3148.00

1

Tilta Nucleus M Panasonic GH4/GH5 Run/Stop cable - Foto Videotilbehoer

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera. Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips. Weight: 0.09lbs Length: 68.6cm Color: Black Materials: Copper, rubber, aluminum-alloy

NOK 1572.00

1

Tilta Nucleus M Kinefinity Run/Stop cable - Foto Videotilbehoer

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera. Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips. Weight: 0.09lbs Length: 68.6cm Color: Black Materials: Copper, rubber, aluminum-alloy

NOK 1309.00

1

Tilta - ing Fujifilm X-T3/XT-4 Kit B Black Version - Foto Videotilbehoer

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras. It provides several 1/4”-20 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup. This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4), and finally the Tiltaing Side Power Handle with Run/Stop Type I (F570 Battery) along with the compatible Fujifilm X series R/S cable. Compatible with Type II Baseplates and Type I Side Handles.

NOK 6407.00

1

Tilta Nucules-M Run/Stop Cable - Foto Videotilbehoer

- These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera. - Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips. Packing List (1) 68.6cm cable (1) Male connection (1) 7-pin Male connection Technical Data Weight: 40g Length: 68.6cm Color: Black Materials: Copper, rubber, aluminum-alloy

NOK 1572.00

1

Tilta Half Camera Cage for Sony a7siii Grey - Foto Videotilbehoer

This “half” camera cage provides protective armor for the Sony a7S III camera. It provides several 1/4”-20 mounting points as well as one cold shoe mounting point. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. A Tiltaing Lightweight Quick Release Top Handle with Arri Locating Pins can be attached to the cage to provide for a comfortable camera operating setup.

NOK 898.00

1

Tilta Half Camera Cage for Sony a7siii Black - Foto Videotilbehoer

This “half” camera cage provides protective armor for the Sony a7S III camera. It provides several 1/4”-20 mounting points as well as one cold shoe mounting point. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. A Tiltaing Lightweight Quick Release Top Handle with Arri Locating Pins can be attached to the cage to provide for a comfortable camera operating setup.

NOK 831.00

1

Tilta Full Camera Cage for Z CAM- Grey - Foto Videotilbehoer

This camera cage provides complete protective armor for the Z CAM E2, E2C, E2G camera bodies. It provides several 1/4”-20 and 3/8”-16 mounting points as well as two Arri rosette mounting points and one cold shoe mounting point. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

NOK 2797.00

1

Tilta Hydra Alien Shock Absorb Head with Soft Spring Module - Foto Videotilbehoer

The Hydra Alien Car Mounting System was designed from the ground up to be the perfect lightweight solution for car-mounted cinematography and this new Shock Absorbing Head takes that one step further. This updated Shock Absorbing Head features an updated Soft Spring Module which is specifically designed to support lighter weight gimbals and cameras in underslung configurations. The softer springs will not require as much weight to properly absorb vibrations which will lead to more stabile footage and greatly expand lightweight mounting options for the system. We still recommend using additional counter weight on the Shock Absorbing Arm as it will perform better with heavier payloads. NOTE: This Shock Absorbing Head is NOT recommended to use in upright configurations

NOK 1616.00

1

Tilta Universal handgrip - Foto Videotilbehoer

The Tilta Universal Handgrip is a flexible handgrip system that attaches to either 15 mm lightweight or 19mm studio support rods. It consists of a rod bridge and two handgrips. Each handgrip consists of one 90° bend, a short extension, and a rubber hand grip. Each component of the handgrip assembly can be removed, and you can configure the system to suit your needs. The rod bridge features a single knob that tightens/loosens the rod clamps so it is quick to mount or remove. The assembled system has six points of adjustment, three for each hand, so you can configure the handgrips so they are the most comfortable for you. The adjustment points feature Arri compatible rosettes and spring loaded locking levers. The rubber handgrips provide you with a comfortable sure grip. Material of Construction CNC machined aluminum Dimensions Boxed: 14 x 6.75 x 3.25" (35.6 x 17.1 x 8.3 cm) Weight Shipping: 2.8 lb (1.3 kg)

NOK 9190.00

1

Tilta Quick-releas handgrips -15mm/15mm - Foto Videotilbehoer

This high strength universal hand grip system clamps directly onto the rods of your camera setup, allowing for super fast transitions from shoulder mounted operation to other camera mounts and back again. Simply snap the bridge onto the rods and lock it down via a tightening screw. This system comes in two different designs: one that offers mounting points to 15mm LWS and 15mm studio rod systems and another that offers mounting points to 15mm LWS and 19mm studio rod systems. This snap-on design ensures that you will not have to remove accessories that are already attached to the rods. The rig is extremely stable, solid, and durable. The hand grips have high density foam for comfort, support, and stability which can also be rotated 360 degrees via stainless steel Arri Standard Rosettes. Furthermore, the three-joints design allows for operator flexibility and comfort. The Rosette Extension Handles can be extended to fit your needs. Weight: 2.6 lbs Color: Black Material: Aluminum-alloy, stainless steel Rod System: UH-T04-15S (15mm LWS/15mm studio), UH-T04 (15mm LWS/19mm studio)

NOK 7773.00

1

Tilta TA-T18-D-B Camera Cage for Sony A7s III Kit D - Black - Foto Videotilbehoer

This camera cage provides protective armor for the Sony a7S III camera. It provides several 1/4"-20 mounting points as well as one cold shoe mounting point. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. A quick release top handle can be attached to the cage to provide for a comfortable camera operating setup. Made specifically for video content creators that demand excellent low light performance, numerous recording options, and long recording times, the new A7sIII builds upon the legacy of the A7sII to deliver a camera that hits all the right spots for a camera of this level. Inspired by the usefulness and ingenuity of this camera's design, Tilta set off to incorporate new design touches that help elevate the camera even further. As part of the Tiltaing series of products, Tilta has put together a versatile, yet lightweight camera cage that is just the beginning for building a camera rig for professional video. The new camera cage is designed to augment and protect the a7sIII, as well as add expansion options like our new rotating top handle, rotating side handles, ARRI standard rosette mounts, and much more.

NOK 6025.00

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Merke

Farge

Butikk

Pris (EUR)