design t shirts from GBP 3 | See the cheapest prices and offers on css.nordicadpartner.dk

Ansell Microflex Glove 93-260 SZ 09 (L) x 500 Pairs

Thinnest chemical resistant synthetic composite disposable glove, Three layer design for superior protection against harsh chemicals including acids, solvents and bases, Thin mil construction for enhanced tactility and dexterity, Ergonomic design and extra soft material for longer wear time, Silicone free formulation, Extended cuff for reliable protection against hazardous substances, Lower acceptable pinhole rate (0.65 AQL)

GBP 309.99

1

Ansell ANSELL BARRIER 02-100 GLOVE SZ 09 (L)

Extreme resistance against a wide range of chemicals, due to 5 layer laminated glove, Wing-thumb, hand-specific design provides greater dexterity and reduced hand fatigue, Each glove is individually air-pressure tested, Can be worn as a liner under heavier gloves

GBP 17.99

1

Ansell Touch N Tuff 92-605 PF Nitrile Extended Cuff SZ L 09 BX 1TH

* Made with proprietary Ansell nitrile formulation* Soft nitrile provides high levels of comfort * Robust design for superior durability* Extended cuff for expanded protection over the wrist and forearm* Silicone free design is paint and finish process friendly* Chlorinated, Powder-Free, Silicone Free, Textured Fingers* Beaded Cuff* 300mm length * Acceptable Quality Level (AQL) 1.5* Food safe * EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination* EN ISO 374-1:2016 Type B Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKPT* EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks

GBP 269.99

1

Ansell ANSELL HYFLEX 11-724 GLOVE SZ 09 (L)

Excellent flexibility and fit with optimal cut protection , INTERCEPT TECHNOLOGY cut resistance yarn offers best-in-class cut protection and increased comfort and dexterity, Palm coating design to improve worker grip, extends glove life in abrasive conditions and allows the back-of-hand to breathe, Grey coating hides dirt in environments with dirt exposure

GBP 9.99

1

Ansell ACTIVARMR 80-813 GLOVES 09(L) PK 12

First glove to combine outstanding flame resistance with high cut protection and ergonomic design, Materials used in the glove are inherently flame resistant, even after washing, Arc Flash Hazard/Risk Category 1,: helps protect workers against arc flash hazards, Exclusive composite yarn provides exceptional cut resistance for safe handling of sharp objects and materials, Soft foam coating to ensure great flexibility and a secure grip in a variety of environments, Ergonomic design for superior comfort and reduced hand fatigue, Anti-static according to EN1149, Arc Flash NFPA 70E - Test Method/Standard: ASTM F2675-22 - Result: Hazard/Risk Category (HRC) 1 , Category III, EN 407 Protective gloves against thermal risks 4.1.2.1.1.0, EN388:2016 Protective gloves against mechanical risks 2X42CIdeal applications, Equipment assembly, replacing filters and parts, Facility and machinery maintenance, Pipe installation and repair, Carpentry/Scaffolding, Heavy duty metal handling, Heavy equipment and vehicle maintenance, De-energised electrical wiring & clean-up

GBP 249.99

1

Ansell ANSELL ALPHATEC 53-001 GAUNTLET SIZE 09 (L) Pack of 6

Chemical-resistant glove with a unique multi-layer design for broader protection,Maximized protection: AlphaTec 53-001 safety gloves MICROCHEM multi-layer nitrile and neoprene protective barrier ensures EN 374 type A chemical defences and protection from acids and hydrocarbons ,Enhanced grip: ANSELL GRIP coating offers secure grip for wet or oily components ,Elevated comfort: AlphaTec 53-001 chemical gloves soft nylon inner liner grants them a comfortable feel ,Considered aesthetics: Their black cuff design makes them perfect for dirt-prone outdoor application ,Certified skin-friendly and harm-free: Oeko-Tex certification ensures they contain no substances harmful to human health, Improved durability: AlphaTec 53-001 industrial gloves multi-layer coating is also abrasion resistant, achieving EN and ANSI level 3 abrasion resistance, 350mm length ,EN 407 Protective gloves against thermal risks X1XXXX,EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, ACFGJKLMNOPST, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks,EN 388:2016 Protective gloves against mechanical risks 3121A,Level 3- Abrasion,Level 1- Cut Resistance ,Level 2- Tear Resistance,Level 1- Puncture,Level A- ISO 13997 Cut Resistance

GBP 89.99

1

Ansell Touch N Tuff 92-600 Glove SZ 09 (L) - Box of 1000

Made with proprietary Ansell nitrile formulation, Soft nitrile provides high levels of comfort , Robust design for superior durability, resisting rips and tears,Advanced chemical resistance using TNT Technology , Powder-Free, Silicone Free, Smooth Fingers, 240mm length , Acceptable Quality Level (AQL) 1.5, Food safe , EN ISO 374-1:2016 Type B Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKPT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks, ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers. Performance requirements

GBP 199.99

1

Ansell 93-732 Microflex Black Nitrile Disposable Gloves (BX-100) (L-8.5-9)

The MICROFLEX MidKnight Touch 93-732 nitrile gloves provide a premium blend of comfort, dexterity, and durability. Designed for professionals who need precision, they incorporate ERGOFORM Technology to minimise muscle strain during repetitive tasks, improving both comfort and productivity. The sleek black colour offers a professional appearance while discreetly masking oils, bodily fluids, and stains. Textured fingertips ensure a secure grip for confident handling of instruments and materials. With an ultra-thin yet strong design, these gloves deliver excellent tactile sensitivity without compromising durability, making them ideal for applications that demand both protection and precision. Features and Benefits High-quality nitrile material for strength and flexibility Ergonomically designed to minimise strain and improve comfort during extended use Dark black shade to hide marks and maintain a clean appearance Enhanced grip with textured fingertips for confident handling Ultra-thin yet durable design for improved touch sensitivity and protection Typical Applications General dentistry Standard patient examinations Emergency services Catering/Meal preparation General Purpose Auto Aftermarket Equipment repair and maintenance Laboratory analysis Cosmetic Procedures Tattoo Standards EC 1935/2004 CE 0493 EN 455 1-4 EN ISO 21420:2020 EN ISO 374-1:2016 EN ISO 374-5:2016 ISO 18889:2019 ISO 9001 US QSR/FDA 510(k) Medical Examination Grade ASTM D6319 EC 2023/2006 EN 421:2010 EN 16523-1 FDA21 CFR 177-2600-US Food Contact Approved ISO 13485

GBP 10.99

1

Ansell HyFlex 11-754 Large (09) Pack of 12

Heightened defences: Developed with INTERCEPT Cut Resistance Technology, and satisfying ANSI A4 and EN ISO D cut resistance standards, HyFlex 11-754 industrial gloves guard against lacerations and prevent common workplace injuries, Enhanced tactile sensitivity: Palm-dipped, with nylon liner, these PU-coated gloves benefit from advanced tactile sensitivity and touchscreen compatibility ,Elevated comfort: Ultra-lightweight and fitted to natural hand contours, HyFlex 11-754 PPE gloves elicit minimal hand fatigue ,Improved dexterity: These polyurethane gloves ultralight design also increases flexibility and everyday ease of use ,Certified skin-friendliness: HyFlex 11-754 industrial working gloves are Dermatest - approved for skin-friendliness, PU palm coated, Nylon, HPPE, Spandex, Stainless steel Liner, 18 Gauge , EN 388:2016 Protective gloves against mechanical risks 3X41D

GBP 143.99

1

Ansell HyFlex 11-755 Large (09) Pack of 12

Heightened defences: Developed with INTERCEPT Cut Resistance Technology, and satisfying ANSI A4 and EN ISO D cut resistance standards, HyFlex 11-755 industrial gloves guard against lacerations and prevent common workplace injuries, Enhanced tactile sensitivity: Palm-dipped, with nylon liner, these PU-coated gloves benefit from advanced tactile sensitivity and touchscreen compatibility ,Elevated comfort: Ultra-lightweight and fitted to natural hand contours, HyFlex 11-755 PPE gloves elicit minimal hand fatigue ,Improved dexterity: These polyurethane gloves ultralight design also increases flexibility and everyday ease of use ,Certified skin-friendliness: HyFlex 11-755 industrial working gloves are Dermatest - approved for skin-friendliness, PU palm coated, Nylon, HPPE, Spandex, Tungsten Liner, 18 Gauge , EN 388:2016 Protective gloves against mechanical risks 3X41E

GBP 159.99

1

Ansell ANSELL VERSATOUCH 87-195 GLOVE SZ 09 (L)

Ultralight, highly tactile food processing gloves, specially treated to reduce allergy risks, Alphatec 87-195 safety gloves posses EU food handling certification, Cotton-flocked lining, lessening perspiration and discomfort, EN374 Type B chemical defences, protecting against mild acids, animal fats, oils, detergents and alcohols, Super-thin composition ensures high levels of tactile sensitivity, for more precise handling. An ultra-lightweight design makes these Alphatec gloves dexterous and maneuverer, Food safe, Natural Rubber Latex, 305mm length , EN ISO 374-1:2016 Type B Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, KLT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks, EN 421 Protective gloves against ionizing radiation and radioactive contamination, EN 388:2016 Protective gloves against mechanical risks 1010X, Abrasion- Level 1, Cut Resistance- X, Tear- 0, Puncture- Level 1

GBP 2.99

1

Ansell ANSELL HYFLEX 11-840 GLOVE SZ 09 (L)

Improved durability and grip: These HyFlex gloves FORTIX Abrasion Resistance Technology delivers 2x more grip and ensures ANSI/EN compliant abrasion resistance (vs. previous technology version),Advanced ergonomics: ERGOFORM Ergonomic Design Technology ensures a fit shaped to natural hand contours,Elevated comfort: HyFlex 11-840 safety gloves ZONZ Comfort Fit Technology relieves tension,for optimal comfort,Guaranteed skin-friendliness and cleanliness: HyFlex 11-840 PPE gloves benefit from Dermatest certification and an impurity-extracting proprietary washing process,Reduced contaminants: Silicone-free, they prevent contaminant transfer to metal before painting,Certified harm-free: They are also Oeko-Tex -approved, certifying them free of substancesharmful to human health , Foam nitrile palm coated, Nylon Spandex Liner, 15 gauge ,Food safe, Silicone free material: for no transfer of silicone containments to metal parts prior to painting, EN 388:2016 Protective gloves against mechanical risks 4131A, EN 407 Protective gloves against thermal risks X1XXXX

GBP 5.99

1

Ansell HyFlex 11-849 SZ 09 L Pack of 12

Heightened defences: HyFlex 11-849 safety gloves fully dipped design ensures 360 protection from light scratches and dirt,Improved durability: Their FORTIX Abrasion Resistance nitrile foam coating guarantees ANSI/EN-compliant abrasion resistance,Enhanced grip: HyFlex 11-849 safety gloves come with 2x more grip, for better performance in dry or slightly oily conditions ,Reduced contaminants: HyFlex 11-849 industrial working gloves are silicone-free, avoiding contaminant transfer to metal before painting,Certified harm-free: Dermatest and Oeko-Tex certification ensure these PPE gloves are skin friendly and free of harmful substances,Elevated comfort: These HyFlex gloves Spandex and nylon liner is shaped to natural handcontours, Foam nitrile palm coated,Fully coated nitrile , Nylon Spandex Liner, 18 gauge ,Food safe, Silicone free material: for no transfer of silicone containments to metal parts prior to painting, EN 388:2016 Protective gloves against mechanical risks 4121A, EN 407 Protective gloves against thermal risks X1XXXX

GBP 85.99

1

Ansell HyFlex 11-842 Gloves Size 09L

Sustainable design: HyFlex 11-842 sustainable Multi-Purpose glove liners are designed with 90% recycled nylon yarn, reducing our carbon footprint by 75g CO2eq/pair,, and plastic-free inner packaging that contains 53% fewer materials, Increased durability: FORTIX Technology provides up to 20% greater abrasion resistance, Enhanced comfort: ZONZ Comfort Fit Technology helps improve breathability and dexterity, Touchscreen compatibility: These industrial gloves work with multiple touchscreen devices no need to remove them when switching between tasks for enhanced workplace safety, Certified skin-friendliness: These HyFlex gloves are dermatologically tested and free of harmful substances, Minimum recycled content of more than 30% in the final product (based on size 9), vs. standard nylon multi-purpose gloves, 71% less greenhouse gas emissions Ansells LCA, calculated as weight reduction, peerreviewed, vs. previous technology version , Foam nitrile palm coated, Recycled nylon spandex liner, 15 gauge , Food safe, Silicone free material: for no transfer of silicone containments to metal parts prior to painting, EN 388:2016 Protective gloves against mechanical risks 4131A, EN 407 Protective gloves against thermal risks X1XXXX

GBP 54.99

1

Ansell Alpha-Tec 58-535B Glove L (09) - Pack of 6

Enhanced grip: Thanks to their ANSELL GRIP coating, AlphaTec 58-535B safety gloves minimize the force required to handle oily or wet components, Elevated comfort: Their black acrylic inner liner improves comfort and facilitates outdoor application, Advanced defences: AlphaTec 58-535B work gloves bonded construction, featuring a coating polymer that doesnt penetrate the liner in manufacture, limits liquid and chemical leakage, Improved durability: They also boast ANSI/EN compliant abrasion resistance , Specialized protection: Beyond chemical resistance, they satisfy EN 407 contact heat level 1, further enhancing workplace safety, Augmented dexterity: AlphaTec 58-535B PPE gloves lightweight 7-gauge design offers greater dexterity and flexibility, Nitrile glove with acrylic black liner, 13.4 (340mm) length , EN 407 Protective gloves against thermal risks X1XXXX, EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOPT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks, Food safe, EN 388:2016 Protective gloves against mechanical risks 3122A, Level 3 Abrasion, Level 1- Cut Resistance , Level 2 Tear Resistance, Level 2- Puncture, Level A- ISO 13997 Cut Resistance

GBP 71.99

1

Ansell Alphatec 37-310 Glove Size 09 (L) X Pair

* These food-processing gloves offer an engineered fit to allow an optimum balance of fit and flexibility both on its own or as an over glove* 8mil/0.2mm thickness allows dexterity and tactility without a loss of durability* Nitrile Rubber (NBR) offering protection against light acids, greases, oils and liquids* The latex-free formulation of these meat-processing gloves presents no risk of Type 1 allergies* Reverse lozenge grip design* Unflocked to prevent the risk of food contamination* Long cuff extends to the forearm* 12.2 (310mm) Length * Green, 37-300 and Yellow, 37-320 Variants available upon request* EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKT* EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks* EN 421 Protective gloves against ionizing radiation and radioactive contamination* ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers. Performance requirements* EN 388:2016 Protective gloves against mechanical risks 2001X* Abrasion- Level 2* Cut Resistance- X* Tear- 0* Puncture- Level 1

GBP 2.99

1

Ansell ANSELL ALPHATEC 58-330 GLOVE SIZE 09 (L) PK 12

AlphaTec AQUADRI gloves are engineered with a unique moisture management technology that keeps hands dryer, for significantly longer periods of time. The design features a two-layered coating construction with a superior nitrile film for advanced chemical protection and an inner soft foam coating, making a difference especially when sweaty hands are a problem, resulting in an improved user comfort and performance.Patented AQUADRI technology brings a unique performance in moisture management that significantly reduces sweat build up inside the glove under hot & humid environments.High performance nitrile compound offers a far superior snag, puncture and abrasion protection compared with rubber or neoprene gloves,Reverse lozenge palm finish for improved dry/wet grip,Foldable cuff gutter to prevent dripping on the forearm, 320mm length ,Food safe,EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLOPT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks,EN 388:2016 Protective gloves against mechanical risks 3101X,Level 3- Abrasion,Level 1- Cut Resistance ,Level 0- Tear Resistance,Level 1- Puncture,Level X ISO 13997 Cut Resistance

GBP 79.99

1

Ansell ANSELL ALPHATEC 37-310 GLOVE SIZE 09 (L) PK 144

These food-processing gloves offer an engineered fit to allow an optimum balance of fit and flexibility both on its own or as an over glove, 8mil/0.2mm thickness allows dexterity and tactility without a loss of durability, Nitrile Rubber (NBR) offering protection against light acids, greases, oils and liquids, The latex-free formulation of these meat-processing gloves presents no risk of Type 1 allergies, Reverse lozenge grip design, Unflocked to prevent the risk of food contamination, Long cuff extends to the forearm, 12.2 (310mm) Length , Green, 37-300 and Yellow, 37-320 Variants available upon request, EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks, EN 421 Protective gloves against ionizing radiation and radioactive contamination, ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers. Performance requirements, EN 388:2016 Protective gloves against mechanical risks 2001X, Abrasion- Level 2, Cut Resistance- X, Tear- 0, Puncture- Level 1

GBP 149.99

1

Ansell ANSELL ALPHATEC 58-335 GLOVE SIZE 09 (L) PK 12

AlphaTec AQUADRI gloves are engineered with a unique moisture management technology that keeps hands dryer, for significantly longer periods of time. The design features a two-layered coating construction with a superior nitrile film for advanced chemical protection and an inner soft foam coating, making a difference especially when sweaty hands are a problem, resulting in an improved user comfort and performance.Patented AQUADRI technology brings a unique performance in moisture management that significantly reduces sweat build up inside the glove under hot & humid environments.High performance nitrile compound offers a far superior snag, puncture and abrasion protection compared with rubber or neoprene gloves,Reverse lozenge palm finish for improved dry/wet grip,Foldable cuff gutter to prevent dripping on the forearm,Longer version than the 58-330 for further protection, 380mm length ,Food safe,EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLOPT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks,EN 388:2016 Protective gloves against mechanical risks 4101X,Level 4- Abrasion,Level 1- Cut Resistance ,Level 0- Tear Resistance,Level 1- Puncture,Level X ISO 13997 Cut Resistance

GBP 69.99

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Colour

Size

Merchant

Price (EUR)