asics 1000 4 from GBP 10 | See the cheapest prices and offers on css.nordicadpartner.dk

Apollo Mounting Plate for 4 Prisms 100m 29600-529

Apollo Mounting Plate for 4 Prisms 100m 29600-529Mounting Plate 4 Prisms.Auto-Aligning Beam Detector DescriptionThe high-performance Auto-Aligning Beam Detector comprises of a ground level controller detector head with auto-aligning feature integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.Brand InformationAuto-compensates for building movement and contaminationIntegral laser and auto-align enable quicker installationLow-level system controller with LCD display and user-friendly interface

GBP 88.92

1

Apollo Series 65 Auxiliary Relay Base 45681-246APO

Apollo Series 65 Auxiliary Relay Base - 45681-246OperationSeries 65 Relay Bases are primarily intended for use with control units using 4-wire detector supply and alarm initiating circuits. Where local codes allow they may also be used in 2 and 4-wire circuits to provide volt-free control signals to an auxiliary system such as an automatic door closer. They are not suitable for use in systems where it is specified or required that operation of the auxiliary system shall be fail-safe and must not be used with any other type of detector.Product InformationThe Series 65 Auxiliary Relay Base provides two sets of volt-free changeover contacts to facilitate the switching of a remote LED or other auxiliary device.Key FeaturesDetector locking mechanismOne way fitEasy to wireContains an earth connector

GBP 18.80

1

Apollo Series 65 Standard Relay Base 45681-245APO

Apollo Series 65 Standard Relay Base - 45681-245OperationSeries 65 Relay Bases are primarily intended for use with control units using 4-wire detector supply and alarm initiating circuits. Where local codes allow they may also be used in 2 and 4-wire circuits to provide volt-free control signals to an auxiliary system such as an automatic door closer. They are not suitable for use in systems where it is specified or required that operation of the auxiliary system shall be fail-safe and must not be used with any other type of detector.Product InformationThe Series 65 Standard Relay Base provides one set of volt-free changeover form C contacts that change state when the detector signals an alarm.Key FeaturesDetector locking mechanismOne-way fitEasy to wireContains an earth connector

GBP 18.71

1

Apollo XP95 Beacon Base with Isolator - 45681-333APO

Apollo XP95 Beacon Base with Isolator - 45681-333APOThe Visual Indicator Base is a loop-powered visual indicator combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. The visual indicator base can be used with either a detector fitted or with a cap as a stand-alone alarm device. The base is loop powered so needs no external power supply. It operates at 1728V DC and is polarity-sensitive.Device AddressingThe Base responds to its own individual address set with a DIL switch. It also responds to a group address set by means of a 4-segment DIL switch and to a synchronisation address which is embedded in the unit. Addresses 1 to 111 are used exclusively for individual addresses addresses 112 to 126 are used for group addressing while the synchronisation address to which all units respond is 0. Any Beacon Base on a loop may be freely assigned to a group. The address for any group must be chosen from the range 112126.Addresses 112126 may be used as individual addresses but only if the 4-segment DIL switch is not used ie group addressing is disabled. If the 4-segment DIL switch were set to any number other than the default 127 a pre-set analogue value of 4 would be transmitted to indicate a fault. The Base is normally polled by its individual address. It responds as described below. It is recommended that the synchronisation address 0 be sent by the control panel at regular intervals to align the internal clock of all sounders. The result is that the beacons are synchronised with each other when activated.Key FeaturesVisual indicator flash rate of once per secondSynchronisation of visual indicator flashIndividual and group addressingUnique visual indicator self-testLoop-poweredBuilt-in Isolator

GBP 35.83

1

Apollo Series 65 End-of-Line Relay Base - 24V 45681-248APO

Apollo Series 65 End-of-Line Relay Base 24V - 45681-248OperationSeries 65 Relay Bases are primarily intended for use with control units using 4-wire detector supply and alarm initiating circuits. Where local codes allow they may also be used in 2 and 4-wire circuits to provide volt-free control signals to an auxiliary system such as an automatic door closer. They are not suitable for use in systems where it is specified or required that operation of the auxiliary system shall be fail-safe and must not be used with any other type of detector.Options45681-247 for circuits having a supply voltage between 9- and 18-volts DC and 45681-248 for circuits having a supply voltage between 16 and 33 volts DC.Product InformationThe Series 65 End-of-Line EOL Relay Base is intended for use with four-wire circuits and features two sets of changeover contacts and a power supervision relay.Key FeaturesDetector locking mechanismOne way fitEasy to wireContains an earth connector

GBP 22.14

1

Apollo Series 65 End-of-Line Relay Base 12V - 45681-247APO

Apollo Series 65 End-of-Line Relay Base 12V - 45681-247OperationSeries 65 Relay Bases are primarily intended for use with control units using 4-wire detector supply and alarm initiating circuits. Where local codes allow they may also be used in 2 and 4-wire circuits to provide volt-free control signals to an auxiliary system such as an automatic door closer. They are not suitable for use in systems where it is specified or required that operation of the auxiliary system shall be fail-safe and must not be used with any other type of detector.Options45681-247 for circuits having a supply voltage between 9- and 18-volts DC and 45681-248 for circuits having a supply voltage between 16- and 33-volts DC.Product InformationThe Series 65 End-of-Line EOL Relay Base is intended for use with four-wire circuits and features two sets of changeover contacts and a power supervision relay.Key FeaturesDetector locking mechanismOne way fitEasy to wireContains an earth connector

GBP 22.14

1

Apollo Discovery Red Open-Area Voice Sounder - 58000-010APO

Apollo Discovery Red Open-Area Voice Sounder - 58000-010APOThe Discovery Open-Area Voice Alarm Devices comprise of a sounder and a sounder visual indicatorthat have been designed to provide clear instructional messages through the Discovery protocol. They are loop-powered wall mounted devices.Key Features 4 pre-set message pairs capable of up to 15 tone message pairsLow current and high volumeFully synchronisedSet up and test at point of installation

GBP 129.07

1

Apollo Conventional Triple IR Flame Detector 55000-019APO

Apollo Conventional Triple IR Flame Detector 55000-019APOThe IR3 Flame Detector is designed for harsh environments in indoor applications. The detector has three sensors which respond to different IR wavelengths to discriminate between flames and spurious sources of radiation.Key Features Selectable output options Conventional two-wire 4-20mA Latching or Non-latching RelayContacts - FireFault Pre alarmClass 1 sensitivity to EN54-10 detects 0.1m2 fire at 25mHigh optical interference immunitySelectable response speedOptical self-testLow power consumptionIP65 ratedSupply voltage 14 to 30VdcOperating temperature -10C to 55C

GBP 1755.00

1

Apollo Conventional Dual IR Flame Detector 55000-060APO

Apollo Conventional Dual IR Flame Detector 55000-060APOThe IR2 Flame Detector is designed for harsh environments in indoor applications. The detector has two sensors which respond to different IR wavelengths to discriminate between flames and spurious sources of radiation.Key Features Selectable output options Conventional two-wire 4-20mA Latching or Non-latching RelayContacts - FireFault Pre alarmClass 1 sensitivity to EN54-10 detects 0.1m2 fire at 25mHigh optical interference immunitySelectable response speedOptical self-testLow power consumptionIP65 ratedSupply voltage 14 to 30VdcOperating temperature -10C to 55C

GBP 1494.48

1

Apollo Conventional UV Dual IR Flame Detector 55000-064APO

Apollo Conventional UV Dual IR Flame Detector 55000-064APOThe combination of UV and IR2 detection plus signal processing allows the sensor to be used without risk of false alarms in difficult situations characterised by factors such as flickering blackbody by radiation or arc welding. Key FeaturesSelectable output options Conventional two-wire 4-20mA Latching or Non-latching Relay Contacts - FireFault Pre alarmClass 1 sensitivity to EN54-10 detects 0.1m2 fire at 25mHigh optical interference immunitySelectable response speedOptical self-testLow power consumptionIP65 ratedSupply voltage 14 to 30VdcOperating temperature -10C to 55COperating temperature -10C to 55C

GBP 2152.80

1

Apollo Orbis Multi-Sensor Detector - ORB-OH-13001-APO

Apollo Orbis Multi-Sensor Detector - ORB-OH-13001-APOThe Orbis Multi-sensor Detector benefits from the same false alarm reduction technology as the optical detector enhanced by the addition of a thermal sensing element.Key FeaturesResponds well to fast-burningflaming firesTransient rejection algorithms reduce false alarmsAutomatic drift compensation with DirtAlert a yellow flashing LED to easily identify dirty detectorsRed flashing LED at StartUp confirms that the device is operating. SensAlert yellow flashing LED indicates faulty operationFasTest takes just 4 seconds to test and confirm detectors are functioning correctlyDustDefy system prevents dust ingress while maintaining airflow

GBP 23.71

1

Apollo SA4700-103APO Intelligent Mains Switching Input Output Unit

Apollo SA4700-103APO Intelligent Mains Switching Input Output UnitThe Intelligent Mains Switching InputOutput Unit provides asingle line tolerant circuit CoreProtocol only containing oneor more normally open contacts connected to a single pair of cables. It also provides a voltage free change over relay outputcapable of switching mains. Compatible with XP95 Discovery and CoreProtocol digital communication protocols.Key FeaturesImproved design for ease of wiring meaning faster installationContains controllable isolatorAddress range 1 - 254Nine pre-configured modes including compatibility mode from XP95Discovery to CoreProtocol systemsTwo input channelsFailsafe mode meets BS 7273-4 requirementsConfigurable input stylesEarth fault monitoring

GBP 69.41

1

Apollo SA4700-302APO Intelligent DIN-Rail Input Output Unit

Apollo SA4700-302APO Intelligent DIN-Rail Input Output UnitThe Intelligent DIN-Rail InputOutput Unit providessupervision of one or more normally open volt free contactsconnected to a single pair of cables and a set of changeoverrelay output contacts. Compatible with XP95 Discovery and CoreProtocol digital communication protocols.Mechanical ConstructionThe Intelligent DIN-Rail InputOutput Unit is designed to be mounted on a 35 mm width DIN-Rail inside an enclosure.Key FeaturesImproved design for ease of wiring meaning faster installationContains controllable isolatorAddress range 1 - 254Nine pre-configured modes including compatibility mode from XP95Discovery to CoreProtocol systemsFailsafe mode meets BS 7273-4 requirementsConfigurable input stylesEarth fault monitoring

GBP 56.90

1

Apollo Loop-Powered Amber Visual Indicator - 55000-879APO

Apollo Loop-Powered Amber Visual Indicator - 55000-879APOThe Loop-Powered Visual Indicator is a local-area visual indicator designed for indoor use. The Visual Indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.The Base responds to its own individual address set with a DIL switch. It also responds to a group address set by means of a 4-segment DIL switch and to a synchronisation address which is embedded in the unit.Key FeaturesHigh intensity LEDsMore reliable than xenon visual indicatorsAutomatic LED checkLockableWide angle of visibilityEnables DDA complianceSynchronised flashCan be used with Discovery or XP95

GBP 47.11

1

Apollo Loop-Powered Clear Visual Indicator 55000-878APO

Apollo Loop-Powered Clear Visual Indicator 55000-878APOThe Loop-Powered Visual Indicator is a local-area visual indicator designed for indoor use. The Visual Indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.The Base responds to its own individual address set with a DIL switch. It also responds to a group address set by means of a 4-segment DIL switch and to a synchronisation address which is embedded in the unit.Key FeaturesHigh intensity LEDsMore reliable than xenon visual indicatorsAutomatic LED checkLockableWide angle of visibilityEnables DDA complianceSynchronised flashCan be used with Discovery or XP95

GBP 47.11

1

Apollo Weatherproof Red Multi-Tone Open-Area Sounder Visual Indicator without Isolator 55000-296APO

Please note This product is currently on an extended leadtime and will be available from June 2024. Pleasecontact usfor further information.Apollo Weatherproof Red Multi-Tone Open-Area Sounder Visual Indicator without Isolator 55000-296APOThe Weatherproof Multi-Tone Open-Area Sounder Visual Indicator is designed for use in outdoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements Apollos intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.The Multi-tone Open-Area Alarm Devices responds to their own individual address set with a DIL switch. They can also respond to a Group Address which allows multiple sounders to be controlled simultaneously. A group address may be any spare address between 112 and 126 and is selected by means of a 4 segment DIL switch.An Alarm Device under group address control must have an individual address between 1 and 111 otherwise a fault value of 4 is transmitted. Alarm Devices not using the group address facility may be addressed at any address 1126.The Weatherproof Multi-Tone Open-Area Sounder Visual Indicator is designed for use in outdoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements Apollos intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.Key FeaturesChoice of tones on standard device Apollo Slow Whoop and DINIP66 ratedTwo Volume settings 92dBA and 100dBASynchronisation of alert and evacuate tonesIndividual and group addressing

GBP 174.34

1

Apollo Series 65 Relay Base 12v 45681-508APO

Apollo Series 65 Relay Base 12v 45681-508The Series 65 12V Relay Base is designed for use in both fire and security systems. For fire systems a jumper on the PCB is fitted to a latching position. For security systems the jumper is moved to another position so that the base is non-latching.OperationSeries 65 Relay Bases are primarily intended for use with control units using 4-wire detector supply and alarm initiating circuits. Where local codes allow they may also be used in 2 and 4-wire circuits to provide volt-free control signals to an auxiliary system such as an automatic door closer. They are not suitable for use in systems where it is specified or required that operation of the auxiliary system shall be fail-safe and must not be used with any other type of detector.Mechanical ConstructionThe base is a white self-extinguishing polycarbonate moulding with zero-force nickel-plated steel terminals for attaching the detector. The moulding has an aperture to accept the locking grub screw built into the detector case. All electronic components including the relay are mounted on a PCB which is retained by two screws in the moulding.Product InformationThe Series 65 12V Relay Base is designed for use in both fire and security systems. For fire systems a jumper on the PCB is fitted to a latching position. For security systems the jumper is moved to another position so that the base is non-latching.Key FeaturesDetector locking mechanismOne-way fitEasy to wireContains an earth connectorCan be used in fire and security systems

GBP 9.76

1

Apollo Integrated Base Sounder without Isolator 45681-278APO

Apollo Integrated Base Sounder without Isolator 45681-278APOThe Integrated Base Sounder comprises of a base sounder with integral mounting base and is for use with Discovery or XP95 ranges. It is designed for indoor use.The integrated base sounder responds to its own individual address set with a DIL switch. It also responds both to a group address set by means of a 4-segment DIL switch and to a pulsed-mode synchronisation address which is embedded in the unit.The sounder will operate only with control equipment using the Apollo XP95 or Discovery protocol. The features of the Integrated base sounder are available only when the sounder is connected to a control panel with the appropriate software.Key FeaturesTwo tonesTwo volume ranges 55-75dBA and 75-91dBAIndividual and group addressingUnique acoustic self-test

GBP 35.29

1

Apollo SA4700-102APO Intelligent Input Output Unit

Apollo SA4700-102APO Intelligent Input Output UnitThe Intelligent InputOutput Unit provides supervision of oneor more normally open contacts connected to a single pair ofcables and a set of changeover relay output contacts. Compatible with XP95 Discovery and CoreProtocol digital communication protocols.Mechanical ConstructionThe Intelligent InputOutput Unit is available in the new faceplate style enclosure. This can be mounted with the supplied back-box for surface mounting or flush mounted using a UK double gang flush mounting back-box of minimum depth 30mm.OperationThe Intelligent InputOutput Unit provides supervision of one or more normally open contacts connected to a single pair of cables and a set of changeover relay output contacts.Key FeaturesImproved design for ease of wiring meaning faster installationContains controllable isolatorAddress range 1 - 254Nine pre-configured modes including compatibility mode from XP95Discovery to CoreProtocol systemsFailsafe mode meets BS 7273-4 requirementsConfigurable input stylesEarth fault monitoring

GBP 55.15

1

Apollo Exd Conventional UV Dual IR Flame Detector 55000-065APO

Apollo Exd Conventional UV Dual IR Flame Detector 55000-065APOThe Flameproof UVIR2 Flame Detector is designed for hazardous environments in either indoor or outdoor applications where open fires may be expected. False alarms from flickering sunlight arc welding or lightning are avoided by the combination of UV and dual IR signal processing techniques.It detects almost all flames including those invisible to the naked eye e.g. hydrogen fires. Certified by ISSOP for compliance with standards EN50014 EN50018 and EN50281. Key Features ATEX Certified II 2 G DCENELECIEC Certified EEx d - IIC T6- Zones 1 21 2 and 22Class 1 sensitivity to EN54-10 detects 0.1m2 fires at 25mHighest optical interference immunitySelectable output options Conventional two-wire 4-20mA Relay Contacts - FireFault Pre alarm Latching or Non-latchingSelectable response speedRemote control self-testLow power consumptionIP66 ratedSupply voltage 14 to 30VdcOperating temperature -10C to 55C

GBP 2340.00

1

Apollo I.S. Conventional Triple IR Flame Detector 55000-063APO

Apollo I.S. Conventional Triple IR Flame Detector 55000-063APOThe IS IR3 Flame Detector is designed for harsh environments in either indoor or outdoor applications. It is sensitive to low frequency flickering IR radiation emitted from flames during combustion.The sensor operates even through a layer of oil dust water vapour or ice. These detectors have been approved byBaseefa to standards EN50014 EN50020 and EN50284. The requirements of Directive 949EC the Atmosphere Explosives ATEX directive have also been met.Key Features ATEX IECEx certified II 1 GCENELECIEC Certified Ga Ex ia IIC T4Selectable output options Conventional two-wire 4-20mA Latching or Non-latching RelayContacts - FireFault Pre alarmClass 1 sensitivity to EN54-10 detects 0.1m2 fire at 25mHigh optical interference immunitySelectable response speedOptical self-testLow power consumptionIP65 ratedSupply voltage 14 to 30VdcOperating temperature -10C to 40C T4Operating temperature -10C to 55C

GBP 2233.04

1

Apollo Exd Conventional Triple IR Flame Detector 55000-062APO

Apollo Exd Conventional Triple IR Flame Detector 55000-062APOThe Flameproof IR3 Flame Detector is designed for use in hazardous environments in indoor and outdoor applications.It is sensitive to low-frequency flickering infra-red radiation emitted by flames during combustion. The sensor operates even through a layer of oil dust water vapour or ice. Baseefa has certified the detector for compliance to standards EN 60079-0 EN 60079-1 and EN 61241-1 Key Features ATEX IECEx certified II2GD Ex d IIC T4 Gb Ex tb IIICT135 C Db IP66 A21 Zones 1 21 2 and 22Selectable output options Conventional two-wire 4-20mA Latching or Non-latching Relay Contacts - FireFault Pre alarmClass 1 sensitivity to EN54-10 detects 0.1m2 fire at 25mHigh optical interference immunitySelectable response speedOptical self-testLow power consumptionIP66 ratedSupply voltage 14 to 30VdcOperating temperature -10C to 55C

GBP 2340.00

1

Apollo Exd Conventional Dual IR Flame Detector 55000-061APO

Apollo Exd Conventional Dual IR Flame Detector 55000-061APOThe Flameproof IR2 Flame Detector is designed for use in hazardous environments in indoor applications. The combination of filters and signal processing allows the sensor to be used with a very low risk of false alarms in difficult situations characterised by factors such as flickering lights. Baseefa has certified the detector for compliance to standards EN 60079-0 EN 60079-1 and EN 61241-1 Key Features ATEX IECEx certified II2GD Ex d IIC T4 Gb EE tb IIICT135 C Db IP66 A21 Zones 1 21 2 and 22Selectable output options Conventional two-wire 4-20mA Latching or Non-latching Relay Contacts - FireFault Pre alarmClass 1 sensitivity to EN54-10 detects 0.1m2 fire at 25mHigh optical interference immunitySelectable response speedOptical self-testLow power consumptionIP66 ratedSupply voltage 14 to 30VdcOperating temperature -10C to 55C

GBP 2129.40

1

Apollo XPA-CB-14023-APO XPander Multisensor Detector with Sounder VID Base Red Flash

Apollo XPA-CB-14023-APO XPander Multisensor Detector with Sounder VID Base Red FlashXPander sounders are ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 4 tone pairs including the Apollo tone and a self-test which causes a fault signal to be sent if the sounders fail to operate.The address of a sounder or a combined soundervisual indicator is set at the commissioning stage by means of a DIL switch. The sounder address is plus one of the address set.The sounders and combined soundervisual indicators are powered by two packs of batteries one with three AA and one with three C size alkaline batteries which provide a working life of typically 3-5 years.The five-year life includes weekly tests and a half-hour sounding in a fire condition. The Combined Sounders and Sounder Visual Indicators incorporate audible and visual alarm indicators within one unit.

GBP 363.00

1

Apollo XPA-CB-14019-APO XPander Multisensor Detector with Sounder Base

Apollo XPA-CB-14019-APO XPander Multisensor Detector with Sounder BaseXPander sounders are ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 4 tone pairs including the Apollo tone and a self-test which causes a fault signal to be sent if the sounders fail to operate.The address of a sounder or a combined soundervisual indicator is set at the commissioning stage by means of a DIL switch.The sounder address is plus one of the address set. The sounders and combined soundervisual indicators are powered by two packs of batteries one with three AA and one with three C size alkaline batteries which provide a working life of typically 3-5 years.The five-year life includes weekly tests and a half-hour sounding in a fire condition. The Combined Sounders and Sounder Visual Indicators incorporate audible and visual alarm indicators within one unit.

GBP 327.13

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)