signal skjorte from GBP 600 | See the cheapest prices and offers on css.nordicadpartner.dk

Apollo Conventional UV Dual IR Flame Detector 55000-064APO

Apollo Conventional UV Dual IR Flame Detector 55000-064APOThe combination of UV and IR2 detection plus signal processing allows the sensor to be used without risk of false alarms in difficult situations characterised by factors such as flickering blackbody by radiation or arc welding. Key FeaturesSelectable output options Conventional two-wire 4-20mA Latching or Non-latching Relay Contacts - FireFault Pre alarmClass 1 sensitivity to EN54-10 detects 0.1m2 fire at 25mHigh optical interference immunitySelectable response speedOptical self-testLow power consumptionIP65 ratedSupply voltage 14 to 30VdcOperating temperature -10C to 55COperating temperature -10C to 55C

GBP 2152.80

1

Apollo Intelligent Base Mounted Triple IR Flame Detector 55000-024APO

Apollo Intelligent Base Mounted Triple IR Flame Detector 55000-024APOThe Intelligent Base Mounted IR3 Flame Detector is designed to protect allindoorareas even in dirty or smoky conditionswhere open flaming fires may be expected. The detector has three IR sensors that respond to different IR wavelengths in order to discriminate between flames and spurious sources of radiation.Key Features Responds to stationary flames with no flickerSensitive to low-frequency flickering IR radiation emitted by flames during combustionCompact flame detector which fits into Discovery or XP95 basesLoop-poweredFalse alarms due to factors such as flickering sunlight are avoided by a combination of filters and signal processing techniques

GBP 937.60

1

Apollo Marine Intelligent Base Mounted IR3 Flame Detector 55000-029MAR

Apollo Marine Intelligent Base Mounted IR3 Flame Detector 55000-029MARThe Intelligent Base Mounted IR3 Flame Detector is designed to protect all indoor areas even in dirty or smoky conditions where open flaming fires may be expected. The detector has three IR sensors that respond to different IR wavelengths in order to discriminate between flames and spurious sources of radiation.ApplicationThe triple IR flame detector is also fast reacting but is also tolerant of fumes vapours steam dust and mist while being unaffected by the phenomena listed above. It may however be affected by modulated IR radiation. Triple IR flame detectors are used in waste handling colour printing and paper manufacturing.OperationThe detector is sensitive to low-frequency flickering infra-red radiation emitted by flames during combustion. Since it responds to flickering radiation the detector can operate even if the lens is contaminated by a layer of oil dust water-vapour or ice. The detector is set to respond to low-frequency radiation at 1-15Hz 0.75-2.7ym in order to detect all flickering flames including those invisible to the naked eye e.g. those emitted by hydrogen fires.The detector has three IR sensors that respond to different IR wavelengths in order to discriminate between flames and spurious sources of radiation. False alarms due to factors such as flickering sunlight are avoided by a combination of filters and signal processing techniques.Key FeaturesResponds to stationary flames with no flickerSensitive to low-frequency flickering IR radiation emitted by flames during combustionCompact flame detector which fits into Discovery Marine mounting basesLoop-poweredFalse alarms due to factors such as flickering sunlight are avoided by a combination of filters and signal processing techniques

GBP 1177.80

1

Apollo Exd Conventional Dual IR Flame Detector 55000-061APO

Apollo Exd Conventional Dual IR Flame Detector 55000-061APOThe Flameproof IR2 Flame Detector is designed for use in hazardous environments in indoor applications. The combination of filters and signal processing allows the sensor to be used with a very low risk of false alarms in difficult situations characterised by factors such as flickering lights. Baseefa has certified the detector for compliance to standards EN 60079-0 EN 60079-1 and EN 61241-1 Key Features ATEX IECEx certified II2GD Ex d IIC T4 Gb EE tb IIICT135 C Db IP66 A21 Zones 1 21 2 and 22Selectable output options Conventional two-wire 4-20mA Latching or Non-latching Relay Contacts - FireFault Pre alarmClass 1 sensitivity to EN54-10 detects 0.1m2 fire at 25mHigh optical interference immunitySelectable response speedOptical self-testLow power consumptionIP66 ratedSupply voltage 14 to 30VdcOperating temperature -10C to 55C

GBP 2129.40

1

Apollo Exd Conventional UV Dual IR Flame Detector 55000-065APO

Apollo Exd Conventional UV Dual IR Flame Detector 55000-065APOThe Flameproof UVIR2 Flame Detector is designed for hazardous environments in either indoor or outdoor applications where open fires may be expected. False alarms from flickering sunlight arc welding or lightning are avoided by the combination of UV and dual IR signal processing techniques.It detects almost all flames including those invisible to the naked eye e.g. hydrogen fires. Certified by ISSOP for compliance with standards EN50014 EN50018 and EN50281. Key Features ATEX Certified II 2 G DCENELECIEC Certified EEx d - IIC T6- Zones 1 21 2 and 22Class 1 sensitivity to EN54-10 detects 0.1m2 fires at 25mHighest optical interference immunitySelectable output options Conventional two-wire 4-20mA Relay Contacts - FireFault Pre alarm Latching or Non-latchingSelectable response speedRemote control self-testLow power consumptionIP66 ratedSupply voltage 14 to 30VdcOperating temperature -10C to 55C

GBP 2340.00

1

Apollo Marine Intelligent Base Mounted UVIR2 Flame Detector 55000-028MAR

Apollo Marine Intelligent Base Mounted UVIR2 Flame Detector 55000-028MARThe Marine Intelligent Base Mounted UV Dual IR Flame Detector is designed to protect open indoor areas where open flaming fires may be expected. The detector has a UV and dual IR sensors responding to different wavelengths in order to discriminate between flames and spurious sources of radiation. They are used in aircraft hangers generator rooms diesel and gas turbines and paint works.OperationThe detector is sensitive to ultraviolet and low-frequency flickering infra-red radiation emitted by flames during combustion. Since it requires both UV and IR radiation the detector can operate in applications where a basic single UV or single IR detector would be inappropriate. The detector is set to respond to ultraviolet 185 - 260nm and low-frequency flickering infra-red 0.75 - 2.7ym radiation at 1 - 15Hz in order to detect all flickering flames including those invisible to the naked eye e.g. those emitted by hydrogen fires.The detector has one UV and two IR sensors responding to different wavelengths in order to discriminate between flames and spurious sources of radiation. False alarms due to electrical discharges from lightning or arc welding and flickering sunlight are minimised by combining the UVIR signals.Key FeaturesResponds to stationary flames with no flickerSensitive to low-frequency flickering IR radiation emitted by flames during combustion.Compact flame detector which fits into Discovery Marine basesLoop-poweredFalse alarms due to factors such as flickering sunlight are avoided by a combination of filters and signal processing techniques

GBP 1177.80

1

Apollo Intelligent Auto-Aligning Beam Detector SA7100-100APO

Apollo Intelligent Auto-Aligning Beam Detector SA7100-100APOThe Intelligent Auto-Aligning Beam Detector combines a transmitterreceiver in the same detector head with an automatic alignment motor. This combination with integrated addressability allows for quick and simple installation. The Intelligent Auto-Aligning Beam Detector automatically compensates for environmental effects on the beam signal keeping the unit in the best possible working order. This is achieved through the combination of software automatic gain control and motorised realignment of the beam.OperationThe Intelligent Auto-Aligning Beam Detector is a compact detector for detecting smoke in large open areas such as warehouses theatres churches and sports centres. It comprises a ground level loop-powered controller a detector head with an operating range of 8m-50m and a single prism. The operating range of each detector head can be increased up to 100m by using the Extension Kit which comprises of three additional prisms.An additional detector head can be connected to the controller. Each head has a loop address. It also has a built in 20T negative bi-directional short circuit isolator and it is compatible with control panels using CoreProtocol Discovery and XP95 protocol. A built-in laser provides rapid initial alignment and thereafter the detector head will continuously automatically align and compensate for any building movement.The status of each detector can be monitored through the controller which is sited at ground level. The detector head operates both as a transmitter and a receiver. A well-defined IR beam is projected to a prism mounted on the opposite wall which is reflected back to the receiver. In the event of smoke partially obscuring the light an imbalance between the transmitted and received light will occur. The detector will then transmit an alarm value to the control panel.The detector is factory set to a beam obscuration of 35 which is the best setting for most factories and warehouses. The setting can be changed to 25 for offices and clean areas such as theatres or to 50 for hostile areas such as mills or foundries. The detector reports a pre-alarm analogue value 48 at approximately 75 of the alarm threshold. The detector compensates automatically for gradual contamination of the lenses in order to avoid false alarms. The detector is non-latching and resets 30 seconds after an alarm event ceases and in 3 seconds after the removal of a fault.Key FeaturesLoop Powered and compatible with XP95 Discovery and CoreProtocolIncorporates a bi directional short-circuit isolatorAutomatic drift compensationAutomatic resetGround level ControllerAutomatic alignment compensation for building movementLaser assisted alignment for quick installationAllows for 2 detector heads per controllerUp to 100m rangePre-alarm thresholdEN 54-12 and EN 54-17 certified

GBP 599.51

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)