smoothie blender to go from GBP 11 | See the cheapest prices and offers on css.nordicadpartner.dk

Carrier ACA-TOUCH Touchless Request to Exit Button - Standard

Carrier ACA-TOUCH Touchless Request to Exit Button - StandardThe touchless exit buttons provide means to activate a request-to-exit with access control solutions without having to touch anything. This solution is achieved by using Infrared technology. Just move a hand near the front of the sensor to activate the contact. Activation is clearly indicated by an LED showing Green when active or RED when powered but not active.Please note that direct sunlight or reflections may affect the sensitivity of the infrared sensor.Key FeaturesTouchless exit button using IR sensorAttractive timeless designAdjustable distance 3-15 cmAdjustable relay activation periodRed and Green LED indication for standby and activeIndoor use only

GBP 53.84

1

Carrier ACA-TOUCH-SLIM Touchless Request to Exit Button - Slim

Carrier ACA-TOUCH-SLIM Touchless Request to Exit Button - SlimThe touchless exit buttons provide means to activate a request-to-exit with access control solutions without having to touch anything. This solution is achieved by using Infrared technology. Just move a hand near the front of the sensor to activate the contact. Activation is clearly indicated by an LED showing Green when active or RED when powered but not active.Please note that direct sunlight or reflections may affect the sensitivity of the infrared sensor.Key FeaturesTouchless exit button using IR sensorAttractive timeless designAdjustable distance 3 to 15 cmAdjustable relay activation periodRed and Green LED indication for standby and active

GBP 53.84

1

Carrier ACA001 RTE Request To Exit Button Surface Or Flush Mountable 76x72x32mm

Carrier ACA001 RTE Request To Exit Button Surface Or Flush Mountable 76x72x32mmThe ACA001 is a surface mount request to exit button.Key FeaturesFlush mountedMomentary - pulseEasy to install

GBP 25.19

1

Carrier ACA-STEEL-SLIM Touchless Request to Exit Button - Stainless Steel - Slim

Carrier ACA-STEEL-SLIM Touchless Request to Exit Button - Stainless Steel - SlimThe touchless exit buttons provide means to activate a request-to-exit with access control solutions without having to touch anything. This solution is achieved by using Infrared technology. Just move a hand near the front of the sensor to activate the contact. Activation is clearly indicated by an LED showing Green when active or Blue when powered but not active.Please note that direct sunlight or reflections may affect the sensitivity of the infrared sensor.Key FeaturesTouchless exit button using IR sensorAttractive timeless stainless steel designAdjustable distance 3 to 15 cmAdjustable relay activation periodBlue and Green LED indication for standby and activeIndoor use only

GBP 51.43

1

Carrier MCR300-1T-1S-V2 Gigabit Ethernet to SFP Media Converter

Carrier MCR300-1T-1S-V2 Gigabit Ethernet to SFP Media ConverterThe IFS Gigabit Ethernet to SFP Media Converter is designed for the most demanding extended IP network applications offering the flexibility of SFP technology for Gigabit Ethernet transmission over optical fibre.The IFS MCR300-1T-1S-V2 converts 101001000Base-T Ethernet on copper to 100Base FXLXBX or 1000Base SXBXLXLHXZX optical fibre via Small Form-format Pluggable SFP technology. This media converter can be custom configured to your exact system design specifications by utilizing a variety of IFS SFP Mini-GBIC modules. IFS SFP Mini-GBIC modules are available in a variety of versions from multi-mode or single mode fibre 1 or 2 fibres and wide-temperature versions.The MCR300-1T-1S-V2 provides Auto MDIMDI-X on its TP port and a DIP-switch to configure the Link Fault Pass-through function LFP. The LFP function includes both Link Loss Carry Forward LLCF and Link Loss Return LLR. The LLCFLLR function combination provides efficient TP and optical transmission media monitoring and enables immediate alarm notification to network administrators in the event of a link problem.The MCR300-1T-1S-V2 is designed with a unified enclosure that can be used in a stand-alone installation or can easily be inserted into the IFS MCR-R15 media converter rack. The IFS Media Converter Rack can provide DC power for up to 15 MCR Series Media Converters.Key Features101001000Base-TXAuto-negotiation and Auto-MDIMDI-X9K jumbo frame supported100Base FXLXBX or 1000Base SXBXLXLHXZX SFP optic compatible1 SFP slot provides custom configurationOptical fibre and distance vary by SFP ordered separatelyPlug-n-play installationLED indicators for easy local network diagnosticsDIP-switch for LFP function Enable Disable settingUnified design for stand-alone or rack mount installation MCR-R15 chassis

GBP 68.21

1

Carrier 626-6616 2.5m Power Cable C13 LEC To CEE 74 Schuko Male Right Angle

Carrier 626-6616 2.5m Power Cable C13 LEC To CEE 74 Schuko Male Right AngleA 2.5m Power Cable.Key FeaturesC13LEC to CEE 74Schuko Male Right Angle

GBP 11.35

1

Carrier POE304-EX-4P-V2 POE-BT To Gigabit Ethernet 4-port Poe Extender

Carrier POE304-EX-4P-V2 POE-BT To Gigabit Ethernet 4-port Poe ExtenderThe IFS POE304-EX-4P-V2 is remotely powered via Ethernet cable from a PoE-bt injecting device eliminating the need for local power requirements. The POE304-EX-4P-V2 can then transmit up to 4-ports of Ethernet data and PoE-afat power dependent on the Powered Devices PD power demand.The IFS PoE-bt solution facilitates easier network planning by eliminating restrictions of edge device placement near AC power outlets and reducing the need for AC wiring and installation costs.Key Features4-Port POE Switch powered by 1 x POE-bt input up to 95WUp to 75 watts shared POE powerPlug-and-play self-powered designCan be used with an IFS PoE-Ultra Injector or other POE-bt compliantPSE equipmentSupports 101001000Base-T EthernetAuto-detect of PoE equipment providing protection from incorrect installationCurrent overload detectionLED Indicators for PoE In PoE Out DataCan be daisy-chained to extend data and PoE on a single network cable a maximum of 300m

GBP 229.66

1

Carrier 5501-M Processor For Moisture Sensor Supports Up To 4 X 5515-g NC Battery Powered

Carrier 5501-M Processor For Moisture Sensor Supports Up To 4 X 5515-g NC Battery PoweredThe 5500 moisture detection series is designed to respond to the presence of water and other non-flammable conductive liquids and to be connected in the closed loop of an alarm system. Two sensors are available 5505 under carpet sensor and 5515 surface mount sensor.Any combination of up to 4 sensors can be used with the 5501 moisture processor.The 5501 moisture processor can be used with any closed loop control dialler or wireless transmitter input circuit. The processor comes with internal lithium batteries that have an anticipated life time of 10 to 15 years. The processor offers flexibility in mounting with no need for an external power source and minimal wiring required.Key FeaturesDetects presence of water and non-flammable conductive liquidsNo external power requiredSensor circuit totally isolated by optical couplingsUp to 4 sensors per 5501 moisture processor

GBP 64.02

1

Carrier DC301 Money Trap Contact To Detect Removal Of Last Bank Note Self-adhesive CO Contact Black Ungraded

Carrier DC301 Money Trap Contact To Detect Removal Of Last Bank Note Self-adhesive CO Contact Black UngradedThe DC301 bill trap has been specifically designed for use inside cash drawers. Bills are inserted between the lever and the base plate. Once the bills are removed contact is made creating an alarm condition.High QualityThe unit is constructed of Delrin plastic for long life and features an SPDT reed switch for activation. The reed is secured using exclusive polyurethane potting material. Since the unit has no mechanical switch it is not susceptible to dust or humidity and not subject to wear.The device mounts easily using double-sided tape.Key FeaturesCompact housing for easy installation in cash drawersDelrin plastic housing for long lifeReed based switch design - no mechanical switch to wear outNot susceptible to dust humidity or wearDouble-sided tape for easy mounting

GBP 67.50

1

Carrier ATS1210LE 8 Zone Expander With InputOutput Connectors In Large Plastic Housing Grade 3

Carrier ATS1210LE 8 Zone Expander With InputOutput Connectors In Large Plastic Housing Grade 3The ATS1210LE expander offers 8 standard inputs and 8 Open Collector OC outputs expandable to 16 inputs or 16 outputs and is provided in the ATS1647 medium plastic housing. The expanders allow to increase the inputs and outputs of an Axon or an Advisor Advanced control panel or CDC4 series doorlift controller.ExpandersExpanders are used to expand the number of alarm inputs in an Axon panel or an Advisor Advanced system. Expanders allow inputs and outputsrelays to be connected at a location remote from an Axon or an Advisor Advanced panel. Expanders communicate via poll reply messages. Detectors door contacts and other detection devices are connected to expanders that report any change of state to the control panel for processing. Available expanders include support for conventional devices wireless devices as well as intelligent addressable devices. A special expander is available providing expansion of four to eight intelligent doors or lifts.System databus connectionThe system databus is used to connect expanders as well as keypads and readers RASs to Axon or the Advisor Advanced control panel.Remote devices can be up to 1.5 km from a control panels when using the preferred wiring and cable types. Keypads readers and expanders have to be connected via a 2 pair twisted and shielded data cable to the system databus connection to achieve this. WCAT52 is recommended. Daisy chain is the preferred wiring method. The shield of the data cable should be connected to earth at the control panel and should be left disconnected at any other end.FunctionalityExpanders provide information from remote locations to the control panels in structured records. Data collected ranges from a wired input state to wireless or addressable device dates to a door state.Bus devices communicate with the control panel. If a failure in communication occurs the expander remembers the last alarm in a system preventing loss of an alarm due to a short interruption in data communication.Up to 30 expanders can be connected to the system depending on the variant.Key Features8 inputs on boardExpandable to 16 inputs8 OC outputs on boardCompatible with Axon and Advisor Advanced panelsATS1647 plastic enclosure with tamper protectionEN50131 Grade 3PD66622010

GBP 121.75

1

Carrier ABT-NSM-A Noise Sensing Microphone for One Controller - Type A

Carrier ABT-NSM-A Noise Sensing Microphone for One Controller - Type AABT-NSM is measurement microphone which is designed to operate under extreme temperatures. Up to 6 microphones can be connected to ABT-NSC6 via 2-wire cable.The ABT-NSM is available in two housings. Lightweight for indoor applications.Key FeaturesOperates under extreme temperatures2 wire analogue connection up to 300 meters from ABT-NSC6Dimensions 200 x 110 mm

GBP 99.44

1

Carrier 6932AMP-SB Swivel Bracket For Outdoor 6933AMP Curtain Detectors White

Carrier 6932AMP-SB Swivel Bracket For Outdoor 6933AMP Curtain Detectors WhiteDedicated swivel bracket for use only with the outdoor curtain detector 6933AMP.Key FeaturesAccessory for outdoor curtain detector onlyAdds flexibility to the installation pan -45 to 45 and tilt -45 to 15Wall tamper functionality included

GBP 17.83

1

Carrier 6930AMP-SB Swivel Bracket For Outdoor 6931AMP Curtain Detectors

Carrier 6930AMP-SB Swivel Bracket For Outdoor 6931AMP Curtain DetectorsDedicated swivel bracket for use only with the outdoor curtain detectors 6930AMP and 6931AMP.Key FeaturesAccessory for outdoor curtain detector onlyAdds flexibility to the installation pan -45 to 45 and tilt -45 to 15Wall tamper functionality included

GBP 18.90

1

Carrier ABT-NSM-B Noise Sensing Microphone for One Controller - Type B

Carrier ABT-NSM-B Noise Sensing Microphone for One Controller - Type BABT-NSM is measurement microphone which is designed to operate under extreme temperatures. Up to 6 microphones can be connected to ABT-NSC6 via 2-wire cable.The ABT-NSM is available in two housings. Lightweight for indoor applications.Key FeaturesOperate under extreme temperatures 2 wire analogue connection up to 300 meters from ABT-NSC6Dimensions 200 x 146 mm

GBP 182.30

1

Carrier DC418 EN Grade IV Surface Mount Magnetic Contact 4m

Carrier DC418 EN Grade IV Surface Mount Magnetic Contact 4mThe magnetic detector DC418 which is certified according to the requirements of EN 50131-2-6 grade 4 and VdS Class C allows for contact-free opening monitoring of doors and windows in accordance with the highest security requirement specifications. Compared to other high-security magnetic detectors this product also has enhanced external field monitoring which can be used to detect an abnormally large difference between the code that was applied and the code that was taught in.The ability to teach-in this detector to one of eight different magnet variants at the installation location provides for a higher level of security and allows the system to remain relatively flexible with respect to tolerances. The code is assigned at the installation location and is not already defined for the detector at the factory. If a magnetic component is lost or damaged you can simply replace it with a new one and then teach-in the detector to the new component.According to the EN the connection wires are suitable for the connection of an alarm wire loop. The maximum number of detectors that can be connected in series for the evaluation is based on the maximum permitted values of the relevant alarm system.The electronic switches are potential-free relating to direct current from the rest of the circuit and are closed when not in use.Key FeaturesCertified to the highest possible security standard for magnetic switchesHigh dust and humidity resistance IP67Enhanced external field monitoringAbility to teach-in to one of eight different magnet variantsLED providing feedback for installer during entire teach-in processProtection against removal of the sensor from the installation surface

GBP 227.71

1

Carrier DC428 EN Grade IV Roller Shutter Magnetic Contact - 400cm

Carrier DC428 EN Grade IV Roller Shutter Magnetic Contact - 400cmThe magnetic detector DC428 which is certified according to the requirements of EN 50131-2-6 grade 4 and VdS Class C allows for contact-free opening monitoring of doors and windows in accordance with the highest security requirement specifications.Compared to other high-security magnetic detectors this product also has enhanced external field monitoring which can be used to detect an abnormally large difference between the code that was applied and the code that was taught in.The ability to teach-in this detector to one of eight different magnet variants at the installation location provides for a higher level of security and allows the system to remain relatively flexible with respect to tolerances. The code is assigned at the installation location and is not already defined for the detector at the factory. If a magnetic component is lost or damaged you can simply replace it with a new one and then teach-in the detector to the new component.According to the EN the connection wires are suitable for the connection of an alarm wire loop. The maximum number of detectors that can be connected in series for the evaluation is based on the maximum permitted values of the relevant alarm system.The electronic switches are potential-free relating to direct current from the rest of the circuit and are closed when not in use.Key FeaturesCertified to the highest possible security standard for magnetic switchesHigh dust and humidity resistance IP67Enhanced external field monitoringAbility to teach-in to one of eight different magnet variantsLED providing feedback for installer during entire teach-in processProtection against removal of the sensor from the installation surface

GBP 263.56

1

SmartCell SC-11-2201-0001-99 Wireless Control Panel 24V

SmartCell SC-11-2201-0001-99 Wireless Control Panel 24VSmartCell has been designed as a complete wireless fire detection system to protect people and property. The system incorporates separate information zones which allow input devices to be configured in multiple configurations providing maximum flexibility to the user and designer.A SmartCell system can support up to 64 wireless devices consisting of 32 fire devices and 32 information devices.Communication between devices and the control panel is bidirectional and operates in the European harmonised 868MHz frequency band.With significant time saving against conventional and addressable fire system installations no cables no mess and no inconvenience to everyday business SmartCell is perfect for all small to medium sized fire system installations.Key FeaturesFully wirelessQuick and easy to installCompact enclosure80 character OLED displayAccommodates internal communications card for SmartCell Services connection230 VAC version also available

GBP 418.67

1

SmartCell SC-11-1201-0001-99 Wireless Control Panel 230VAC

SmartCell SC-11-1201-0001-99 Wireless Control PanelSmartCell has been designed as a complete wireless fire detection system to protect people and property. The system incorporates separate information zones which allow input devices to be configured in multiple configurations providing maximum flexibility to the user and designer.A SmartCell system can support up to 64 wireless devices consisting of 32 fire devices and 32 information devices.Communication between devices and the control panel is bidirectional and operates in the European harmonised 868MHz frequency band.With significant time saving against conventional and addressable fire system installations no cables no mess and no inconvenience to everyday business SmartCell is perfect for all small to medium sized fire system installations.Key FeaturesFully wirelessQuick and easy to installCompact enclosure80 character OLED displayAccommodates internal communications card for SmartCell Services connection24 VDC version also available

GBP 472.43

1

Carrier ATS1201E 8-32 Zones DGP Input Expander 3A Power Supply Medium Metal Housing EN Grade 3 Class II

Carrier ATS1201E 8-32 Zones DGP Input Expander 3A Power Supply Medium Metal Housing EN Grade 3 Class IIThe ATS1201ATS1203ATS1204 DGPs offer 8 standard inputs 8 Open Collectors OC outputs and a siren driver. The DGP can be expanded to a total of 32 inputs and 32 outputs. It has a built-in 3 A switched mode power supply.Data Gathering PanelsData Gathering Panels DGPs are used to expand the number of alarm inputs in an ATS MASTER ATS Classic system. DGPs allow inputs and outputs relays to be connected at a location remote from an ATS Classic panel. DGPs communicate via poll reply messages. Detectors door contacts and other detection devices are connected to DGPs that report any change of state to the control panel for processing. Available DGPs include support for conventional devices wireless devices as well as intelligent addressable devices. A special DGP available supports expansion of four intelligent doors or lifts.System databus connectionThe system databus is used to connect Data Gathering Panels as well as keypads and readers RASs to the ATS classic control panel. Remote devices can be up to 1.5 km from an ATS control panels when using the preferred wiring and cable types. Arming stations and Data Gathering Panels have to be connected via a 2 pair twisted and shielded data cable to the system databus connection to achieve this. WCAT 52 is recommended. Daisy chain is the preferred wiring method. The shield of the data cable should be connected to earth at the ATS control panel and should be left disconnected at any other end.

GBP 287.26

1

Carrier FPMA-C100 Flatscreen Ceiling Mount Height 79-129 cm Black - 10-26quot

Carrier FPMA-C100 Flatscreen Ceiling Mount Height 79-129 cm Black - 10-26The FPMA-C100 is a tilt- and swivel ceiling mount for flat screens up to 30. This mount is a great choice for space saving placement or when wall mounting and floor placement is not an option.Its versatile tilt 180 rotate 360 and swivel 180 technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The support is easily height adjustable from 79 to 129 centimetres. An innovative cable management conceals and routes cables from ceiling to TV. Hide your cables in the column to keep it nice and tidy.The FPMA-C100 has two pivot points and is suitable for screens up to 30 76 cm. The weight capacity of this product is 12 kg. The ceiling mount is suitable for screens that meet VESDA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using VESA adapter plates.All installation material is included with the product.

GBP 83.29

1

Carrier Q9033 DT Mounting Collar Compatible with DT Series Flame Detectors

Carrier Q9033 DT Mounting Collar Compatible with DT Series Flame DetectorsThe Q9033 Mounting Arm is an approved accessory for installation of X-Series flame detectors. It allows easy pan and tilt adjustments for sighting of the detector.The optional Collar Attachment is used in conjunction with the Mounting Arm to add a third dimension for detector sighting by allowing it to also be rotated.The Collar attachment is recommended for use in applications that require the detector to be panned to extreme angles.In a typical installation the detector is pointed down.When a detector is pointed down panning to either side of centre results in some degree of rotation the greater the pan amount the greater the rotation.Since the cone of vision of the X3301X3302 is not round but truncated on the upper half rotation results in an unbalanced field of view. The Collar Attachment enables the detector to be adjusted level to the horizon thereby ensuring a balanced field of view.Key FeaturesCompatible with all X-Series flame detectorsFM performance approved with X-Series detectorsAdds increased versatility to the Mounting ArmAllows rotation of the detector to ensure optimum detector performanceStainless steel construction suitable for use with either aluminium or stainless-steel detectors and mounting arms

GBP 213.05

1

Carrier ATS1204E 8-32 Zones DGP Input Expander 3A Power Supply Large Metal Housing EN Grade 3 Class II

Carrier ATS1204E 8-32 Zones DGP Input Expander 3A Power Supply Large Metal Housing EN Grade 3 Class IIThe ATS1201E and ATS1204E expanders offer 8 standard inputs 8Open Collectors OC outputs and a siren driver. The expander can beextended to a total of 32 inputs and 32 outputs. It has a built-in 3 Aswitched mode power supply.ExpandersExpanders are used to expand the number of alarm inputs in anAdvisor Advanced system. Expanders allow inputs and outputsrelaysto be connected at a location remote from an Advisor Advanced panel.Expanders communicate via poll reply messages. Detectors doorcontacts and other detection devices are connected to expanders thatreport any change of state to the control panel for processing.Available expanders include support for conventional devices wirelessdevices as well as intelligent addressable devices. A special expanderis available providing expansion of four to eight intelligent doors or lifts.Key Features8 inputs on boardExpandable to 32 inputs8 Open Collector outputs on boardExpandable to 32 OC outputsrelays with optional cards1 siren outputSwitched mode power supply

GBP 446.99

1

SmartCell SC-43-0200-0001-99 Info Contact Monitor

SmartCell SC-43-0200-0001-99 Info Contact MonitorThe SmartCell SC-43-0200-0001-99 Input Device is quick and easy to install and offers individual addressing at the SmartCell Control Panel. The device allows non fire to be monitored at the SmartCell Control Panel and to an information alert when activated. Examples may include the monitoring of doors openingclosing a loss of power to your fridge flood detection and an alarm condition on your intruder system.Features include a resistor monitored input an alternative magnetic contact option and bidirectional 868 MHz communication.This device is third party certified and compatible with the full SmartCell product range.Key FeaturesFull wireless communication with panelQuick and easy to installResistor monitored inputAlternative magnetic contact option magnet suppliedFor connection to remote information devicesNOT DESIGNED FOR FIRE OR SECURITY APPLICATIONS

GBP 34.42

1

Carrier I-9602LW-LPG Addressable LPG Detector - 24VDC with Local Buzzer Alarm

Carrier I-9602LW-LPG Addressable LPG Detector - 24VDC with Local Buzzer AlarmThe I-9602LW Series Addressable Gas Detector is used to detect leakage of home use combustible gas LPG Natural Gas or Coal Gas in such areas as houses hotels and apartments. I-9602LW-LPG detector is specified for detection of Liquefied Petroleum Gas. When leakage is detected the detector will generate high buzzer alert sound and provide a dry contact to turn exhaust fan a 12VDC source to switch off the gas valve.The addressable detector can be linked into GST fire alarm system to carry out intelligent control.Key FeaturesDrift compensation to suit environment changing extensivelyElectronically addressedLocal buzzer alarmSelf-diagnosticRelay output for fan control and valve shut off

GBP 88.20

1

Carrier DF400 UltraLink Processor Module With 88 Relay OutputsInput - DIN-Rail Mount

Carrier DF400 UltraLink Processor Module With 88 Relay OutputsInput - DIN-Rail MountultraLink processor module with 88 relay outputsinputs. DIN-rail mountUltralink IO modules are used to receive andor transmit alarm information as part of an integrated security system.Applications include- Converting FlexZone sensor alarm collected over the Silver Network to relays or open-collector outputs for input to a 3rd party Security Management System.- Collecting auxiliary sensor alarms with dry-contact inputs for display with a Management system.Key FeaturesHosts one network communication cardExpansion port for up to 8 Ultralink expansion modulesUSB configuration port8 relay outputs8 dry-contact inputsSupplies power to connected modulesModular system comprised of processor module relay module open-collector output module dry-contact input module

GBP 1666.18

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)