smoothie blender to go from GBP 4 | See the cheapest prices and offers on css.nordicadpartner.dk

Cooper EC0232 Lon to RS232 Adapter

Cooper EC0232 Lon to RS232 AdapterThe Lon to RS232adapter EC0232allows connection of the Cooper system network LonWorks devices to PC based applications such as site monitor site graphics.The EC0232PAVA offers a similar interfacing facility to the HMX PAVA public addressvoice alarm system by withholding the handshaking functionality and if required the EC0232PAVA3D offers an additional 3 minute time delay before the voice alarm function is actuated. The bi-directional link allows the status of the HMX PAVA system to be displayed and monitored at the control panel. Different messages may be played depending on the configuration of the cause and effect programming.The interface may be located anywhere on the Cooper peer to peer network allowing information from any intelligent addressable control panel to be routed through the bi-directional RS232 port to PC or PAVA system.Key FeaturesAllows connection of Cooper system network devices to PC based applicationsCan be connected at any point on peer to peer networkAllows Cooper system network to be connected to PC or PAVABenefitsIntegrates PC based applicationsIntegrates PAVA systems site monitor and graphpackFlexibility to use any PC application

GBP 406.33

1

Cooper Menvier 400032FIRE-0072 LON to TCP-IP Convertor

Cooper Menvier 400032FIRE-0072 LON to TCP-IP ConvertorThe EC540 LON Range of modules includes smart switch technology which has been tailored in these models for use with Eatons fire system LON network.Their purpose is to extend the distance possible when transmitting fire system data between control fire control panels extended transmission distances are achieved via the fire systems LON network with a further option to convert media from LON to TCP-IP.The EC541 is suitable for applications where Eatons fire system data is required to be extended over TCPIP.

GBP 1808.06

1

Cooper EFGVS7-10-TCPIP TCPIP Graphics Package up to 10 panels

Cooper EFGVS7-10-TCPIP TCPIP Graphics Package up to 10 panels Graphical Visualisation Software license up to 10 panels with TCPIP interlink

GBP 4763.30

1

Cooper EFGVS3-6 Graphics Package up to 6 Panels cw EC0232

Cooper EFGVS3-6 Graphics Package up to 6 Panels cw EC0232Graphical Visualisation Software license up to 6 panels including an EC0232 interface

GBP 2222.88

1

Cooper EFGVS7-10 Graphics Package up to 10 Panels cw EC0232

Cooper EFGVS7-10 Graphics Package up to 10 Panels cw EC0232Graphical Visualisation Software license up to 10 panels including an EC0232 interface

GBP 3704.78

1

Cooper CFVCEA Pullkit without PSU Connects to EVCS Panel or CFEASL4

Cooper CFVCEA Pullkit without PSU Connects to EVCS Panel or CFEASL4It has now become very common for the disabled toilet to be specified as part of the refuge system. The CFVCEA has been specifically designed to integrate disabled call functions into the VoCALL network or VoCALL compact ranges providing the perfect solution for conformity with the Building Regulations Document M and Equality Act 2010.Disabled toilet alarms are required by Building Regulation Document M and by integrating it with the Emergency Voice Communication System all calls relating to disabled communications can be displayed in a single point.The CFVCEA solution is fully monitored and battery backed by the VoCALL system saving local power supplies and giving confidence in the system integrity.The CFVCEA shows up as a call on the VoCALL system but has no speech path so a conversation cannot be had with the occupant use of the type B outstations would allow this.Features Monitored to BS5839 Pt9Remote powered from VoCALL exchangeDual loop pull cordHigh contrast labelsBraille on cancel plateBlue indicationBenefits Saving power no PSU is required remote powered by VoCALL system.One install saves running 2 separate systems.One location all calls from disabled toilets and refuge points monitored from one location.Tactile braille signage to assist partially sighted people to easily operate the cancel plate.

GBP 51.08

1

Cooper EFGVS1-2 Graphics Package up to 2 panels cw EC0232

Cooper EFGVS1-2 Graphics Package up to 2 panels cw EC0232Graphical Visualisation Software license 1-2 panels including an EC0232 interface

GBP 1270.22

1

Cooper CFVCSHF VoCall Type B Surface Mount Red Outstation

Cooper CFVCSHF VoCall Type B Surface Mount Red OutstationThe CFVCSHF VoCALL Type B Outstations are designed to be versatile compact and easy to use. They are designed to fully comply with BS5839 for use as a fire telephone disabled refuge call system or as a combined system.The outstation is available as both flush via a separate bezel or surface mounted with green red or stainless-steel finishes. All feature a high-volume ringer status LED and tactile braille signage providing a complimentary device to go with Type A Outstations Master Network Handsets etc. in commercial buildings.Key FeaturesCompact designHigh volume ringerStatus LED20mm cable glandsLoop output for hearing impaired usersTactile Braille signage to assist partially sighted people to easily operate the outstationFull duplex operation allowing two way voice communicationFlush bezel mounting availableStainless steel optionVersatility the unit can be used on all VoCALL systems

GBP 233.17

1

Cooper CFVCSHFG VoCall Type B Surface Mount Green Outstation

Cooper CFVCSHFG VoCall Type B Surface Mount Green OutstationThe CFVCSHF VoCALL Type B Outstations are designed to be versatile compact and easy to use. They are designed to fully comply with BS5839 for use as a fire telephone disabled refuge call system or as a combined system.The outstation is available as both flush via a separate bezel or surface mounted with green red or stainless-steel finishes. All feature a high-volume ringer status LED and tactile braille signage providing a complimentary device to go with Type A Outstations Master Network Handsets etc. in commercial buildings.Key FeaturesCompact designHigh volume ringerStatus LED20mm cable glandsLoop output for hearing impaired usersTactile Braille signage to assist partially sighted people to easily operate the outstationFull duplex operation allowing two-way voice communicationFlush bezel mounting availableStainless steel optionVersatility the unit can be used on all VoCALL systems

GBP 233.17

1

Cooper CFVCSHFSS VoCall Type B Surface Mount Stainless Steel Outstation

Cooper CFVCSHFSS VoCall Type B Surface Mount Stainless Steel OutstationThe CFVCSHF VoCALL Type B Outstations are designed to be versatile compact and easy to use. They are designed to fully comply with BS5839 for use as a fire telephone disabled refuge call system or as a combined system.The outstation is available as both flush via a separate bezel or surface mounted with green red or stainless-steel finishes. All feature a high-volume ringer status LED and tactile braille signage providing a complimentary device to go with Type A Outstations Master Network Handsets etc. in commercial buildings.Key FeaturesCompact designHigh volume ringerStatus LED20mm cable glandsLoop output for hearing impaired usersTactile Braille signage to assist partially sighted people to easily operate the outstationFull duplex operation allowing two-way voice communicationFlush bezel mounting availableStainless steel optionVersatility the unit can be used on all VoCALL systems

GBP 420.16

1

Cooper Menvier EF-T107 2 x 70v Transformer Standard

Cooper Menvier EF-T107 2 x 70v Transformer StandardThe EF-T107 is 2 x 70v Transformer which are designed to couple the DAU500 transformers to the speaker lines.Key Features100 v line configuration supports up to 100W70 v line configuration supports up to 100W in standard mode and 200W when bridgedUsed to couple the DAU500 transformers to the speaker linesEach DAU500 amplifier supports a connection to up to 2 output transformerMax 6 transformers per DAU500 panel

GBP 127.26

1

Cooper USBINT2 USB Analogue Systems Panel Interface

Cooper USBINT2 USB Analogue Systems Panel InterfaceThe analogue systems panel interface USBINT2 is a universal serial bus converter that provides conversions from RS232 to USB TTL to USB or TTL to RS232.These options provide the connectivity required between a PC and intelligent addressable control panels wireless control panels and wireless survey tools.Key FeaturesIntelligent addressable control panel to PC site installer connection using the RS232 to USB configurationWireless control panel to PC site installer connection using the RS232 to USB configurationWireless control panel to PC wireless live monitor connection using the TTL to USBRS232 configurationsWireless survey tool to PC survey tool connection using the TTL to USBRS232 configurationsBenefitsSimple PC driver installationSimple DIP switch configuration

GBP 148.09

1

Cooper CSI350 Spur Isolator Unit MSI850 FXN513

Cooper CSI350 Spur Isolator Unit MSI850 FXN513An extensive range of interfaces are available to support the Cooper range of control panels providing solutions for most design requirements. The spur isolator unit CSI350 enables a spur of intelligent addressable devices to be connected to a main analogue loop the device is designed to simplify installation of remote parts of buildings or for simple system extensions.Key FeaturesSoft addressedIntegral short circuit isolatorSingle addressAllows a spur of intelligent addressable devices to be connected to the main loop for the loop and the spurAutomatically controls addressing sequenceBenefitsQuick and simple to installNo hard addressing required Plug and playEasy to expand a system using existing wiringReduced installation cost

GBP 70.52

1

Cooper Bi-Wire Flexi 8 Zone Panel EFBW8ZFLEXI

Cooper Bi-Wire Flexi 8 Zone Panel EFBW8ZFLEXIBiWire Flexi combines two technologies to provide a truly versatile fire safety solution. The panel can be configured to allow either two-wire or conventional devices to work on a zone. Each zone is individually configurable so a mixture of types can therefore be installed on the same system. This provides you with the flexibility to utilise all the time-saving benefits of a two-wire system with the ability to use a wide range of conventional devices where required.It shares the same straightforward intuitive interface as the BiWire Ultra and EFCV8Zone conventional panels providing a proven solution for simple programming and maintenance. The BiWire Flexi fire alarm system is certified to EN54 part2 and part 4 and is designed to meet the recommendations of BS5839.Key FeaturesConfigure zone wiring to work as either a conventional or two-wire systemAvailable in 2 4 and 8 zone variantsAllows the connection of an existing conventional system to a BiWire systemCompatible with two-wire and conventional EN 54-23 certified visual alarm devices VADsReduces stock-holding and enables the fire system to adapt to the demands of the customer or applicationSimple to sell and specify Flexi can be used in a wide variety of applications and is very simple to installSave time money and effort when undertaking system extensions and upgradesUp-to-date with latest regulations

GBP 290.23

1

Cooper Bi-Wire Flexi 4 Zone Panel EFBW4ZFLEXI

Cooper Bi-Wire Flexi 4 Zone Panel EFBW4ZFLEXIBiWire Flexi combines two technologies to provide a truly versatile fire safety solution. The panel can be configured to allow either two-wire or conventional devices to work on a zone. Each zone is individually configurable so a mixture of types can therefore be installed on the same system. This provides you with the flexibility to utilise all the time-saving benefits of a two-wire system with the ability to use a wide range of conventional devices where required.It shares the same straightforward intuitive interface as the BiWire Ultra and EFCV8Zone conventional panels providing a proven solution for simple programming and maintenance. The BiWire Flexi fire alarm system is certified to EN54 part2 and part 4 and is designed to meet the recommendations of BS5839.Key FeaturesConfigure zone wiring to work as either a conventional or two-wire systemAvailable in 2 4 and 8 zone variantsAllows the connection of an existing conventional system to a BiWire systemCompatible with two-wire and conventional EN 54-23 certified visual alarm devices VADsReduces stock-holding and enables the fire system to adapt to the demands of the customer or applicationSimple to sell and specify Flexi can be used in a wide variety of applications and is very simple to installSave time money and effort when undertaking system extensions and upgradesUp-to-date with latest regulations

GBP 247.78

1

Cooper Bi-Wire Flexi 2 Zone Panel EFBW2ZFLEXI

Cooper Bi-Wire Flexi 2 Zone Panel EFBW2ZFLEXIBiWire Flexi combines two technologies to provide a truly versatile fire safety solution. The panel can be configured to allow either two-wire or conventional devices to work on a zone. Each zone is individually configurable so a mixture of types can therefore be installed on the same system. This provides you with the flexibility to utilise all the time-saving benefits of a two-wire system with the ability to use a wide range of conventional devices where required.It shares the same straightforward intuitive interface as the BiWire Ultra and EFCV8Zone conventional panels providing a proven solution for simple programming and maintenance. The BiWire Flexi fire alarm system is certified to EN54 part2 and part 4 and is designed to meet the recommendations of BS5839Key FeaturesConfigure zone wiring to work as either a conventional or two-wire systemAvailable in 2 4 and 8 zone variantsAllows the connection of an existing conventional system to a BiWire systemCompatible with two-wire and conventional EN 54-23 certified visual alarm devices VADsReduces stock-holding and enables the fire system to adapt to the demands of the customer or applicationSimple to sell and specify Flexi can be used in a wide variety of applications and is very simple to installSave time money and effort when undertaking system extensions and upgradesUp-to-date with latest regulations

GBP 220.32

1

Cooper Menvier FC6 Addressable Fan Controller 6 Channel Surface Mount

Cooper Menvier FC6 Addressable Fan Controller 6 Channel Surface MountThe fan controller units FC18 and FC6 are designed to work with the Cooper range of intelligent addressable control panels providing the capability to control and display the status of AHU fans.The FC18 and FC6 are connected to a Cooper intelligent addressable control panel by means of the comms loop utilizing only one address whilst providing the ability to monitor and control up to 186 AHU fans.Each FC18 and FC6 unit incorporates its own CPU specifically configured to control the relevant input and output logic making programming quick and easy via the Cooper site installer software.Using Cooper site installer software each individual fan control channel is programmed to an output and feedback input field device to control and monitor the status of an AHU fan.Key Features Soft addressedIntegral short circuit isolatorSingle addressDesigned to operate in conjunction with the Cooper technical IO unit CFC301Comprehensive LED displaySurface or rack mountingKey operated automanual operationComprehensive cause and effect softwareControls - FC6 up to 6 fans - FC18 up to 18 fansAutomatic or manual operationBenefits Quick and simple to installNo hard addressing required Plug and playControl and feedback in one unitCost effective installation solution

GBP 254.84

1

Cooper Menvier EF-T100 2 x 100v Transformer - Standard

Cooper Menvier EF-T100 2 x 100v Transformer - StandardThe EF-T100 is 2 x 100v Transformer for use with the EFDAU500 PAVA system.Key Features100 v line configuration supports up to 100 W in standard mode and 200 W when bridged70 v line is not supportedUsed to couple the DAU500 transformers to the speaker linesEach DAU500 amplifier supports a connection to up to 2 output transformerMax 6 transformers per DAU500 panel

GBP 73.33

1

Cooper ZPCB2252-MSL Mimic PCB Slave - Logic Output

Cooper ZPCB2252-MSL Mimic PCB Slave - Logic Output The ZPCB2252-MSL is the slave PCB which has no loop interface to the CIE but is directly controlled by the ZPCB2252-MML board. Up to 7 slave boards can be daisy chained to the master board and each slave has 32 LED outputs allowing the number of LED outputs to be expanded up to a maximum of 250 not all LEDs on the 7th slave are used. The power to these additional LEDs is also from the external power supply but is transferred through the interlinking cable between boards.Please refer to the datasheet for more information.

GBP 171.56

1

Cooper Menvier 400034FIRE-0074 BACNET LON Interface

Cooper Menvier 400034FIRE-0074 BACNET LON InterfaceThe EC650C BACnet interface is customised for use with Eatons fire systems and provides a BACnet interface to 3rd party systems by mapping fire system data to standard BACnet server objects.BMS systems can subscribe and synchronise to BACnet server objects that are updated each time a status change occurs anywhere in the fire system.Key FeaturesBACnet interface for Eatons fire systemSupports one BACnet MSTP or BACnetIP channel configurableBACnetIP and BACnetMSTO activity LEDEasy to configureDIL rail mountPermits several Eaton panels to connect to 3rd party BACnet BMS system

GBP 3330.47

1

Cooper Bi-Wire Option Board 8 Relay BWOB8Z

Cooper Bi-Wire Option Board 8 Relay BWOB8ZEatons BiWire Ultra Option is an additional daughter card that provides outputs to Fire Protection Equipment FPE Fire Alarm Routing Equipment FRE and Zone Relays. The FRE output is design to activate during a fire event and is connected to phone diallers andor Building Management Systems - the output complies with EN54-2.The FPR output is designed to activate during a fire event and when connected to an external device drive door release mechanism fire screens sprinkler system and gas release systems. Zone relay contacts are volt free and do not provide any voltage. The relays are selectable to be either set to CNO or CNC. The zonal relays are designed to follow the fire condition of the associated zone circuits on the Main Board.

GBP 44.39

1

Cooper Bi-Wire Option Board 4 Relay BWOB4Z

Cooper Bi-Wire Option Board 4 Relay BWOB4ZEatons BiWire Ultra Option is an additional daughter card that provides outputs to Fire Protection Equipment FPE Fire Alarm Routing Equipment FRE and Zone Relays. The FRE output is design to activate during a fire event and is connected to phone diallers andor Building Management Systems - the output complies with EN54-2.The FPR output is designed to activate during a fire event and when connected to an external device drive door release mechanism fire screens sprinkler system and gas release systems. Zone relay contacts are volt free and do not provide any voltage. The relays are selectable to be either set to CNO or CNC. The zonal relays are designed to follow the fire condition of the associated zone circuits on the Main Board.

GBP 34.52

1

Cooper Bi-Wire Option Board 2 Relay BWOB2Z

Cooper Bi-Wire Option Board 2 Relay BWOB2ZEatons BiWire Ultra Option is an additional daughter card that provides outputs to Fire Protection Equipment FPE Fire Alarm Routing Equipment FRE and Zone Relays. The FRE output is design to activate during a fire event and is connected to phone diallers andor Building Management Systems - the output complies with EN54-2.The FPR output is designed to activate during a fire event and when connected to an external device drive door release mechanism fire screens sprinkler system and gas release systems. Zone relay contacts are volt free and do not provide any voltage. The relays are selectable to be either set to CNO or CNC. The zonal relays are designed to follow the fire condition of the associated zone circuits on the Main Board.

GBP 29.59

1

Cooper CDBB300 Conventional Detector Mounting Base EFXN520

Cooper CDBB300 Conventional Detector Mounting Base EFXN520 Please note this will not work on the Legacy Menvier PanelsThe EFXN520 conventional standard base has been specifically designed to be compatible with the Cooper JSB range of conventional detectors. This standard base has been designed for flexibility simplicity and speed of installation.It incorporates purpose designed devices to provide fault warning if detector is removed whilst maintaining full zone wiring integrity. The base has a schotty diode in series with the negative terminals to enable fault monitoring and allow the circuit to continue if a detector is removed.Key FeaturesQuick and simple to installSeparate zone in and zone out terminalsStand-off fixing featureSelectable detector lockingBenefitsAccepts side entry surface cablesCommon base for JSB conventional detectorsInstallationBase incorporates a retaining clip to provide positive feedback when detector is correctly fitted.Separate terminals are provided for zone in and zone out connections.Each terminal can accept up to 2 x 2.5mm cablesBase incorporates a substantial cable entry aperture in the rear of the base.Breakouts are provided to enable the detector base to sit neatly over surface cables and then enter via the rear entry aperture.Base mounting incorporates a stand-off feature to help prevent distortion when mounted on anuneven surface.Fixings are suitable for standard BESA box or direct fixing to suitable surfaceOptional locking devices supplied with base to prevent unauthorised detector removal.

GBP 4.02

1

Cooper FXROLPWR Wall VADSounder - Red

Cooper FXROLPWR Wall VADSounder - RedThe RoLP LX Wall is ideal for dual use applications where a visual alarm device is required in addition to an audible alarm.The RoLP LX is a reliable high performing VAD Visual Alarm Device that is certified to EN 54-23.Recommend for wall use requiring just one installation point the RoLP LX Wall is also available as a base only for use with any standard RoLP sounder.Features and benefitsUltra-low current consumptionRoLP and RoLP Maxi sounder optionsUp to 7.5m coverage volume switchable to 2.5m0.5 or 1Hz flash rateUse where current consumption is a key considerationDelivering up to 106dBA at 1 metres sound outputIdeal for bedrooms bathrooms and toiletsSwitch flash rate to 0.5Hz to reduce current consumption

GBP 100.91

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)