recovery pulver from GBP 1 | See the cheapest prices and offers on css.nordicadpartner.dk

Domus HRX-E HERA Heat Recovery Unit

Domus HRX-E HERA Heat Recovery Unit Product Part Number Domus HRXE-HERA-H Opposite Handed - HRXE-HERA-OPH Description The Domus HRXE-HERA-H provides a maximum flow rate of 288m3/hr suitable for a house up to 172 m2 floor area with up to 5 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, Integral Humidity Sensor The Domus unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Domus units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Domus units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket AV (anti vibration mounting kit) - HRXE-HERA-AV The optional anti vibration kit can be used for both wall and floor Tank Stand The MVHR unit can be positioned on the optional tank stand using the Anti-vibration tray assembly discarding the angle brackets. (7) Angled Brackets The unit can be installed above the floor on a wall angled bracket (8) Accessories Condensation Drain – 297 HEAR Replacement filters SPR428

GBP 1270.67

1

Domus HRX-E AURA Heat Recovery Unit

Domus HRXE-AURA-H Opposite Handed - HRXE-AURA-OPH Description The Domus HRXE-AURA-H provides a maximum flow rate of 320m3/hr suitable for a house up to 190 m2 floor area with up to 5 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Domus unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Domus units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Domus units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket AV (anti vibration mounting kit) - HRXE-AURA-AV The optional anti vibration kit can be used for both wall and floor Tank Stand The MVHR unit can be positioned on the optional tank stand using the Anti-vibration tray assembly discarding the angle brackets. (7) Angled Brackets The unit can be installed above the floor on a wall angled bracket (8) Accessories Condensation Drain – 397 Aura Replacement filters SPR428

GBP 1480.66

1

Domus HRXE condensate drain

Domus HRXE condensate drain Product Part Number Domus HRXE condensate drain - 397 Description Drains condensation liquid from the HRXE heat recovery unit.

GBP 124.94

1

Domus RDM-MD220 Radial Manifold (9x75mm)

Domus RDM-MD220 Radial Manifold (9x75mm) Product Part Number Domus MD220 Radial Manifold - RDM-MD220 Main Features The manifold is a specialised component used as a central distribution system. It distributes the air from a Centralised MEV or Heat Recovery unit instead of adjacent to room entry as in traditional branch system. With inherent insulation and sound attenuation properties, this also helps prevent condensation and limit the escape of heat and noise, reducing the requirement for duct silencers. Suitable for most makes of Radial ducting Option to integrate round and rectangular rigid ducting Offers an improved airflow over traditional MVHR ducting methods

GBP 248.77

1

Special Offer - Domus Firestop Oversleeve

Special Offer - Domus Firestop Oversleeve Semi-Rigid Duct Fire-Stopping Sleeve Domus Radial systems are a clever plug and play whole house ventilation solution, which use manifold distribution to evenly service each room through semi-rigid duct. These systems incorporate a centralised mechanical unit; either a Mechanical Ventilation with Heat Recovery (MVHR) or Mechanical Extract Ventilation (MEV). Perfect ventilation choice for all residential dwellings Installation The simple plug and play mechanism between the semi-rigid duct and manifold, as well as the plenum’s clip-on fixing system, make Domus Radialultra-quick to install. As directed in our simple online step-by-step installation guide, the only tools you will require are: Pozidrive screw driver Cutting tool Long reach spanner* Allen key

GBP 24.00

1

Rectangular Ducting Connector

Rectangular Ducting Connector Product Part Number 110x54mm Connector - C110 204x60mm Connector - C204 220x90 Connector - C220 Description Rectangular Ducting Connector can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives. Is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments. Compatibility Compatible with most manufactures including 110X54 204X60 220X90 Verplas VKC235 VKC5608 VKC5708 Vent-Axia 436605 436623 403026 Manrose 40200 58200 55200 Domus 40020 520 920 Nuaire PVC020WH PVC520WH

GBP 1.10

1

Rectangular T Piece

Rectangular T Piece Product Part Number 110X54mm T Piece - T110 204x60mm T Piece - T204 220x90mm T Piece - T220 Description Top Quality White Plastic T Piece Three x rectangular connections Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems. Compatibility Compatible with most manufactures including 110x54mm 204x60mm 220x90mm Verplas VKC228 VKC5630 VKC5730 Vent-Axia 436614 436551 449365 Manrose 40080 55582 - Domus DD080 582 982 Nuaire PVC080WH

GBP 4.31

1

Domus 2x75mm Plenum with Flow Control

Domus 2x75mm Plenum with Flow Control with seals Product Part Number Domus Plenum 2x75mm with Flow Control - RDOP-125FC Description Domus Radial systems are a clever plug and play whole house ventilation solution, which use manifold distribution to evenly service each room through semi-rigid duct. These systems incorporate a centralised mechanical unit; either a Mechanical Ventilation with Heat Recovery (MVHR) or Mechanical Extract Ventilation (MEV). Perfect ventilation choice for all residential dwellings Installation The simple plug and play mechanism between the semi-rigid duct and manifold, as well as the plenum’s clip-on fixing system, make Domus Radialultra-quick to install. As directed in our simple online step-by-step installation guide, the only tools you will require are: Pozidrive screw driver Cutting tool Long reach spanner* Allen key

GBP 31.93

1

Rectangular Horizontal 45° Bend

Rectangular Horizontal 45° Bend Product Part Number 110x54 Horizontal 45 degree Bend - HB45110 204x60 Horizontal 45 degree Bend - HB204-45 220x90 Horizontal 45 degree Bend - HB22045 Description Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems This horizontal 45 degree bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives. Is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments. Compatibility Compatible with most manufactures including 110X54 204X60 220X90 Verplas VKC227 VKC5616 VKC5716 Vent-Axia - 249944 449363 Manrose 40450 55810 - Domus 40055 50555 955 Nuaire PVC055WH PVC555WH - Performance

GBP 3.44

1

PVC Round Ducting

PVC Round Ducting Product Part Number 100mm PVC pipework x 1 meter - P100-1 125mm PVC pipework x 1 meter - P125-1 150mm PVC pipework x 1 meter - P150-1 Description Top quality UK manufactured ducting supplied in one-meter length for ease of transport and installation (2-meter lengths are available in pallet deliveries) Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems Compatibility Compatible with most manufacturers including 100mm 125mm 150mm Verplas VKC250 VKC267 VKC670 Vent-Axia 5108250 434715 5108248 Manrose 41900 51900 61900 Domus 11004 11005 1100-6 Nuaire PVC11004WH PVC11005WH

GBP 6.48

1

Rectangular Ducting Horizontal 90° Bend

Rectangular Ducting Horizontal 90° Bend Product Part Number 110x54 Horizontal 90 degree Bend - HB90110 204x60 Horizontal 90 degree Bend - HB204-90 220x90 Horizontal 90 degree Bend - HB220 Description Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems This horizontal 90 degree bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives. Designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments. Compatibility Compatible with most manufactures including 110X54 204X60 220X90 Verplas VKC238 VKC5605 VKC5705 Vent-Axia 436602 436620 403028 Manrose 1510 1550 - Domus 40050 50550 950 Nuaire PVC050WH PVC550WH -

GBP 3.18

1

Rectangular Ducting 45° Vertical Bend

Rectangular Ducting 45° Vertical Bend Product Part Number 110x54mm Vertical 45 degree Bend - VB45110 204x60mm Vertical 45 degree Bend - VB204-45 220x90mm Vertical 45 degree Bend - VB220-45 Description Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems This vertical 45 degree elbow bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives. Both sides are female sockets. Is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments. Compatibility Compatible with most manufactures including 110X54 204X60 220X90 Verplas VKC226 VKC5617 VKC5717 Vent-Axia 445196 441655 449364 Manrose 40045 - - Domus 40075 50575 975 Nuaire PVC075WH PVC55WH

GBP 6.92

1

PVC Flat Channel Rectangular Ducting

PVC Flat Channel Rectangular Ducting Product Part Number 100x54mm Flat Channel Ducting - P-110-1 204x60mm Flat Channel Ducting - P-204-1 220x90mm Flat Channel Ducting 1m - P-220-1.0 Description Top Quality UK Manufactured ducting supplied in one-meter length for ease of transport and installation Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems (2-meter lengths are available in pallet deliveries) Please note that any small orders below 20 meters may only be supplied in one meter lengths (excluding complete orders over £500) Compatibility Compatible with most manufactures including 110x52mm 204x60mm 220x90mm Verplas VKC294 VKC5604 VKC5704 Vent-Axia 436599 436617 403025 Manrose 40100 55100

GBP 5.77

1

Rectangular Ducting 90° Vertical Bend

Domus Rectangular Ducting 90° Vertical Bend Product Part Number 110x54mm Vertical 90 degree Bend - VB90110 204x60mm Vertical 90 degree Bend - VB204-90 220x90mm Vertical 90 degree Bend - VB220-90 Description Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems This vertical 90 degree bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives. Both sides are female sockets Is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments. Compatibility Compatible with most manufactures including 110X54 204X60 220X90 Verplas VKC239 VKC5612 VKC5712 Vent-Axia 436603 436621 403029 Manrose 40600 58600 55600 Domus 060 560 960 Nuaire PVC050WH

GBP 1.88

1

Rectangular Ducting Round to Straight Offset Adaptor

Rectangular Ducting Round to Straight Offset Adaptor Product Part Number 110x54mm Round to Rectangular Adapter - A110100 204x60mm Round to Rectangular Adaptor - A204125 220x90mm Round to Rectanglular Adaptor - A220150 Description 110x54 to 100 Offset Straight Adaptor - A110100 - Used to connect 110x54mm ducting to 100mm round male fittings - A 100mm connector (C100) would be required to connect to 100mm Pipe 204x60 to 125 Offset Straight Adaptor - A204125 - Used to connect 204x60mm ducting to 125mm round male fittings - A 125mm connector (C125) would be required to connect to 125mm Pipe 220x90 to 150 Offset Straight Adaptor - A220150 - Used to connect 220x90mm ducting to 150mm round male fittings - A 150mm connector (C150) would be required to connect to 150mm Pipe Top Quality UK Manufactured ducting supplied in one-meter length for ease of transport and installation Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems. Compatibility Compatible with most manufactures including 110x53mm to 100mm 204x60mm to 125mm 220x90mm to 150mm

GBP 3.14

1

Rectangular Ducting Elbow Bend(Fixed Spigot)

Rectangular Ducting Elbow Bend (Spigot) Product Part Number 110x54mm Elbow Bend - S110 204x60mm - Fixed Spigot - SP204-125 204x60mm - Fixed Spigot - SP204-150 220x90mm - Fixed Spigot - SP220-125 220x90mm - Fixed Spigot - SP220-150 Description 90 degree elbow bend which converts rectangular PVC ducting to round PVC ducting in order to install a air valve or to convert to round pipe. Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems. Performance Solid Rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible pvc or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of Plastic Ducting Sealant and Aluminium Duct Sealing Tape Apply Duct sealant to the pipe connections Push together Apply Aluminium Duct Sealing Tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations

GBP 2.66

1

Plastic Ducting Reducer / Adaptor

Plastic Ducting Reducer / Adaptor Allows you to convert a larger duct to a smaller duct with ease 125 to 100 Reducer / Adaptor R125100P On one side there is a 125mm female socket. - this will fill fit over male fittings (such as bends, connectors, etc) but will not fit directly onto ducting without using a male connector On the other side there is a 100mm male spigot, this will allow you to install into ducting or flexible ducting but will not connect to a fitting without using a short piece of ducting 150 to 100 Reducer / Adaptor R150100P On one side there is a 150mm female socket. - this will fill fit over male fittings (such as bends, connectors, etc) but will not fit directly onto ducting without using a male connector On the other side there is a 100mm male spigot, this will allow you to install into ducting or flexible ducting but will not connect to a fitting without using a short piece of ducting 150 to 125 Reducer / Adaptor R150125P On one side there is a 150mm female socket. - this will fill fit over male fittings (such as bends, connectors, etc) but will not fit directly onto ducting without using a male connector On the other side there is a 125mm male spigot, this will allow you to install into ducting or flexible ducting but will not connect to a fitting without using a short piece of ducting 200 to 150 Reducer / Adaptor R200150P On one side there is a 200mm female socket. - this will fill fit over male fittings (such as bends, connectors, etc) but will not fit directly onto ducting without using a male connector On the other side there is a 150mm male spigot, this will allow you to install into ducting or flexible ducting but will not connect to a fitting without using a short piece of ducting Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Compatibility Compatible with most manufacturers Performance Solid rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations Installation To provide the best performance in airtightness and durability we recommend You provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and

GBP 1.91

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)