new wilson driver from GBP 4 | See the cheapest prices and offers on css.nordicadpartner.dk

Elmdene TAMPER-G2 Tamper Kit New Style - Front Only

Elmdene TAMPER-G2 Tamper Kit New Style - Front OnlyThe TAMPER-G2 is the latest tamper kit front only.

GBP 4.21

1

Elmdene RAPIER-DUM-SS Dummy Rapier with Stainless Steel Cover

Elmdene RAPIER-DUM-SS Dummy Rapier with Stainless Steel CoverThe RAPIER-DUM-SS is a Decoy Rapier with a stainless steel cover.The Rapier range of high quality external sounders has been upgraded to fully meet the requirements of the new sounder standard EN50131-42009 Grade 3 and 4Key FeaturesHigh polished finishComes with bracketPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 38.20

1

Elmdene RAPIER-G3P-NC EN50131-4 Security Grade 3 Rapier External Sounder - No Cover

Elmdene RAPIER-G3P-NC EN50131-4 Security Grade 3 Rapier External Sounder - No CoverThe Rapier range of high quality external sounders has been upgraded to fully meet the requirements of the new sounder standard EN50131-42009 Grade 3 and 4. They also include a host of new and improved features.The sounders include a diagnostic LED which will flash to indicate problems with the sounder versatile trigger options and comfort LEDs to signal that the device is working. Control panel dependent end of line resistors also help make installation easier.The Rapier sounders can be mounted in portrait or landscape orientation giving real flexibility. This is now made easier with the inclusion of two internal spirit levels. The stainless-steel covers clean lines give a smart and aesthetically-pleasing look to the unit.Key FeaturesGrade 3Twin PiezoTwin Strobe Twin Comfort LEDs 113db1mGalvanised Steel BackplateSAB operationTwin comfort LEDsRing line monitoringSelf-Test with Fault OutputRemote Test InputSelectable end of line resistorsSelectable cut off timerIntegral spirit levelLandscape or Portrait mounting - 342x221x55Designed to meet the requirements of EN50131-42009 Grade 3 and 4Low power operation 10mA standby 220mA full alarm - siren strobe113dBA sound outputBattery and piezo self-test with fault outputRemote test inputRing line monitoringSilent engineer modeRange of selectable integral EOL tamper resistorsAudible tamper status to assist commissioningLED strobeTwin flashing comfort LEDsFull SAB capabilitySelectable positive hold-off signallingDiagnostic LEDCascade tamper for multiple sounder installationsTwo internal spirit level to aid vertical or horizontal mounting3-year warrantyPlease note This product is for illustrative purposes only. No cover will be provided with this product.

GBP 54.76

1

Elmdene RAPIER-G3S-NC EN50131-4 Security Grade 3 Rapier External Sounder No Cover

Elmdene RAPIER-G3S-NC EN50131-4 Security Grade 3 Rapier External Sounder No CoverThe Rapier range of high quality external sounders has been upgraded to fully meet the requirements of the new sounder standard EN50131-42009 Grade 3 and 4. They also include a host of new and improved features.The sounders include a diagnostic LED which will flash to indicate problems with the sounder versatile trigger options and comfort LEDs to signal that the device is working. Control panel dependent end of line resistors also help make installation easier.The Rapier sounders can be mounted in portrait or landscape orientation giving real flexibility. This is now made easier with the inclusion of two internal spirit levels. The stainless-steel covers clean lines give a smart and aesthetically-pleasing look to the unit.Key FeaturesGrade 3Twin PiezoTwin Strobe Twin Comfort LEDs 113db1mGalvanised Steel BackplateSAB operationTwin comfort LEDsRing line monitoringSelf-Test with Fault OutputRemote Test InputSelectable end of line resistorsSelectable cut off timerIntegral spirit levelLandscape or Portrait mounting - 342x221x55Designed to meet the requirements of EN50131-42009 Grade 3 and 4Low power operation 10mA standby 220mA full alarm - siren strobe113dBA sound outputBattery and piezo self-test with fault outputRemote test inputRing line monitoringSilent engineer modeRange of selectable integral EOL tamper resistorsPortrait or landscape mountingAudible tamper status to assist commissioningLED strobeTwin flashing comfort LEDsFull SAB capabilitySelectable positive hold-off signallingDiagnostic LEDCascade tamper for multiple sounder installationsTwo internal spirit level to aid vertical or horizontal mounting3-year warrantyPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 90.65

1

Elmdene RAPIER-G3S EN50131-4 Security Grade 3 Rapier External Sounder

Elmdene RAPIER-G3S EN50131-4 Security Grade 3 Rapier External SounderThe Rapier range of high quality external sounders has been upgraded to fully meet the requirements of the new sounder standard EN50131-42009 Grade 3 and 4. They also include a host of new and improved features.The sounders include a diagnostic LED which will flash to indicate problems with the sounder versatile trigger options and comfort LEDs to signal that the device is working. Control panel dependent end of line resistors also help make installation easier.The Rapier sounders can be mounted in portrait or landscape orientation giving real flexibility. This is now made easier with the inclusion of two internal spirit levels. The stainless-steel covers clean lines give a smart and aesthetically-pleasing look to the unit.Key FeaturesGrade 3Twin PiezoTwin Strobe Twin Comfort LEDs 113db1mGalvanised Steel BackplateStainless-steel coverSAB operationTwin comfort LEDsRing line monitoringSelf-Test with Fault OutputRemote Test InputSelectable end of line resistorsSelectable cut off timerIntegral spirit levelLandscape or Portrait mounting - 342x221x55Designed to meet the requirements of EN50131-42009 Grade 3 and 4Low power operation 10mA standby 220mA full alarm - siren strobe113dBA sound outputBattery and piezo self-test with fault outputRemote test inputRing line monitoringSilent engineer modeRange of selectable integral EOL tamper resistorsPortrait or landscape mountingAudible tamper status to assist commissioningLED strobeTwin flashing comfort LEDsFull SAB capabilitySelectable positive hold-off signallingDiagnostic LEDCascade tamper for multiple sounder installationsTwo internal spirit level to aid vertical or horizontal mounting3-year warrantyPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 122.29

1

Elmdene G2405BM-H 24V d.c. Switch Mode PSU 27.6V 5Amp To Load amp 0.5A Battery Charging

Elmdene G2405BM-H 24V d.c. Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general purpose applications. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Key FeaturesBattery MonitoringMulti LED status indicationFit up to 2x38Ah batteriesH Box 420h x 420w x 180dHinge lid

GBP 212.34

1

Elmdene STV2405-H 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery Charging

Elmdene STV2405-H 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery charge up to 2x38Ah batteriesH Box 420h x 420w x 180dHinge lid

GBP 281.09

1

Elmdene STV2401-C 24V d.c. PSU 27.6V 1.2Amp To Load 0.3A Battery Charging

Elmdene STV2401-C 24V d.c. PSU 27.6V 1.2Amp To Load 0.3A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x1.2Ah batteriesC Box

GBP 137.36

1

Elmdene FOM8-DIN 8 Way Fused Output Module

Elmdene FOM8-DIN 8 Way Fused Output ModuleElmdenes new Fused Output Modules FOMs are available in three standard variants. FOM4 4 x 1A FOM8 8 x 500mA and the DIN rail mountable FOM8-DIN 8 x 1A.Particularly useful in CCTV applications it gives the installer the provision of up to 8 independently fused outputs extremely useful when powering multiple devices.Each output possesses its own health status LED indication which provides quick identification of any blown fuses. The DIN rail version also offers an onboard switch enabling the user to turn off the outputs allowing for safe installation and maintenance activities to be conducted.The FOM4 and FOM8 are provided with self-adhesive mounts while the DIN rail mountable version has the option to be either DIN rail or screw mounted. These devices are ideal for modular applications such as rack installations or for use within existing PSU enclosures.Key Features4 or 8 individually fused outputsFuse health LED indicationPTC Fuse versions availableDIN rail mountableSwitchable supply inputFlexible low-cost solution

GBP 23.08

1

Elmdene STV2405-K 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery Charging

Elmdene STV2405-K 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x17Ah batteries inc. 12AhK Box 325h x 350w x 105dHinge lid

GBP 245.68

1

Elmdene STV2402-H 24V d.c. PSU 27.6V 2 Amp To Load 0.8A Battery Charging

Elmdene STV2402-H 24V d.c. PSU 27.6V 2 Amp To Load 0.8A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x38Ah batteriesH Box 420h x 420w x 180dHinge lid

GBP 232.69

1

Elmdene G2410BM-H PSU 27.6V 300W - Selectable LoadCharge Current 10A0.7A 8A1.6A

Elmdene G2410BM-H PSU 27.6V 300W - Selectable LoadCharge Current 10A0.7A 8A1.6AThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general purpose applications. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key FeaturesOutput mains on 27.6V dc nominalLoad Output 10 Amp Optional ratings 1 2 3 5 Amp availableMax Battery Capacity H Box 2x38AhMains Supply 90 - 260V 5060HzEnvironment -10C to 40C 95RHEnclosure H - 420H x 420W x 180D Hinge LidPlease note The image is for illustrative purposes only. Please refer to the product description.

GBP 283.96

1

Elmdene STV2405-E 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery Charging

Elmdene STV2405-E 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x17Ah batteriesE Box 420h x 400w x 80dHinge lid

GBP 259.36

1

Elmdene STV2402-C 24V d.c. PSU 27.6V 2 Amp To Load 0.3A Battery Charging

Elmdene STV2402-C 24V d.c. PSU 27.6V 2 Amp To Load 0.3A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x7Ah batteriesC Box 275h x 330w x 80dHinge lid

GBP 184.55

1

Elmdene STV2405-C 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery Charging

Elmdene STV2405-C 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x7Ah batteriesC Box 275h x 330w x 80dHinge lid

GBP 228.52

1

Elmdene STV2402-E 24V d.c. PSU 27.6V 1.8 Amp To Load 0.7A Battery Charging

Elmdene STV2402-E 24V d.c. PSU 27.6V 1.8 Amp To Load 0.7A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x17Ah batteriesE Box 420h x 400w x 80dHinge lid

GBP 209.48

1

Elmdene FOM-4 4 Way Fused Output Module - Mounted On Sticky Pad Feet

Elmdene FOM-4 4 Way Fused Output Module - Mounted On Sticky Pad FeetElmdenes new Fused Output Modules FOMs are available in three standard variants. FOM4 4 x 1A FOM8 8 x 500mA and the DIN rail mountable FOM8-DIN 8 x 1A.Particularly useful in CCTV applications it gives the installer the provision of up to 8 independently fused outputs extremely useful when powering multiple devices.Each output possesses its own health status LED indication which provides quick identification of any blown fuses. The DIN rail version also offers an onboard switch enabling the user to turn off the outputs allowing for safe installation and maintenance activities to be conducted.The FOM4 and FOM8 are provided with self-adhesive mounts while the DIN rail mountable version has the option to be either DIN rail or screw mounted. These devices are ideal for modular applications such as rack installations or for use within existing PSU enclosures.Key Features4 or 8 individually fused outputsFuse health LED indicationPTC Fuse versions availableSwitchable supply inputAdhesive mounts providedFlexible low-cost solution

GBP 14.15

1

Elmdene FOM-8 8 Way Fused Output Module - Mounted On Sticky Pad Feet

Elmdene FOM-8 8 Way Fused Output Module - Mounted On Sticky Pad FeetElmdenes new Fused Output Modules FOMs are available in three standard variants. FOM4 4 x 1A FOM8 8 x 500mA and the DIN rail mountable FOM8-DIN 8 x 1A.Particularly useful in CCTV applications it gives the installer the provision of up to 8 independently fused outputs extremely useful when powering multiple devices.Each output possesses its own health status LED indication which provides quick identification of any blown fuses. The DIN rail version also offers an onboard switch enabling the user to turn off the outputs allowing for safe installation and maintenance activities to be conducted.The FOM4 and FOM8 are provided with self-adhesive mounts while the DIN rail mountable version has the option to be either DIN rail or screw mounted. These devices are ideal for modular applications such as rack installations or for use within existing PSU enclosures.Key Features4 or 8 individually fused outputsFuse health LED indicationPTC Fuse versions availableSwitchable supply inputAdhesive mounts providedFlexible low-cost solution

GBP 19.45

1

Elmdene RAPIER-6510-NC External Sounder - Grade 3 -Twin Piezo -Twin Strobe amp Twin Comfort LED

Elmdene RAPIER-6510-NC External Sounder - Grade 3 -Twin Piezo -Twin Strobe Twin Comfort LEDThe INCERT approved Rapier 6510 external sounder fully meets the requirements of EN50131-42009 Grade 3. It also includes a host of new and improved features.The sounder now includes a diagnostic LED which will flash to indicate problems with the sounder versatile trigger options and comfort LEDs to signal that the device is working. Control panel dependent end of line resistors also help make installation easier.The Rapier 6510 sounder can be mounted in portrait or landscape orientation giving real flexibility. This is now made easier with the inclusion of two internal spirit levels. The stainless-steel covers clean lines give a smart and aesthetically-pleasing look to the unit.Key FeaturesINCERT ApprovedDesigned to meet the requirements of EN50131-42009 Grade 3Low power operation 10mA standby 180mA full alarm siren strobeBattery and Piezo self-test with fault outputRange of selectable integral EOL tamper resistorsCan be mounted portrait or landscapeAudible tamper closure to assist commissioningSelectable positive hold-off signallingCascade tamper for multiple sounder installationsRemote test inputRing line monitoringSilent engineer modeDiagnostic LEDLED strobeTwin flashing comfort LEDsFull SAB capability

GBP 54.81

1

Elmdene STX2405-MOD 24V d.c. PSU 27.6V - 5 Amp To Load 0.8A Battery Charging

Elmdene STX2405-MOD 24V d.c. PSU 27.6V - 5 Amp To Load 0.8A Battery ChargingThe STX2405-MOD is a PSU for Fire Systems.The new STX range of switch mode power supplies has been specifically designed for EN54 compliant fire systems.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with independent volt free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick diagnostics of the status of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features0.8A Battery Charging5 Amp To Load24V d.c. PSU 27.6VHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indication27.6V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power reducing power billsLonger life in the fieldLess prone to failureDeep Discharge ProtectionRemote fault signallingFull rated current to load plus additional current for battery chargingLED indicationVolt-free fault output - EPSVolt-free fault output - PSU faultMains transient protection3 Year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 136.48

1

Elmdene STX2401-MOD 24V d.c. PSU 27.6V 1.2 Amp To Load 0.3A Battery Charging

Elmdene STX2401-MOD 24V d.c. PSU 27.6V 1.2 Amp To Load 0.3A Battery ChargingThe STX2401-MOD is a PSU for Fire Systems.The new STX range of switch mode power supplies has been specifically designed for EN54 compliant fire systems.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with independent volt free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick diagnostics of the status of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features0.3A Battery Charging1.2 Amp To LoadHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indication27.6V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power reducing power billsLonger life in the fieldLess prone to failureDeep Discharge ProtectionRemote fault signallingFull rated current to load plus additional current for battery chargingLED indicationVolt-free fault output - EPSVolt-free fault output - PSU faultMains transient protection3 Year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 89.46

1

Elmdene STX2402-MOD 24V d.c. PSU 27.6V - Selectable 2 Amp To Load 0.3A Battery Charging or 1.8 Amp To Load 0.7A Battery Charging

Elmdene STX2402-MOD 24V d.c. PSU 27.6V - Selectable 2 Amp To Load 0.3A Battery Charging or 1.8 Amp To Load 0.7A Battery ChargingThe STX2402-MOD is a PSU for Fire Systems.The new STX range of switch mode power supplies has been specifically designed for EN54 compliant fire systems.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with independent volt free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick diagnostics of the status of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features0.7A Battery Charging1.8 Amp To Load0.3A Battery ChargingSelectable 2 Amp To LoadHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indication27.6V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power reducing power billsLonger life in the fieldLess prone to failureDeep Discharge ProtectionRemote fault signallingFull rated current to load plus additional current for battery chargingLED indicationVolt-free fault output - EPSVolt-free fault output - PSU faultMains transient protection3 Year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 111.65

1

Elmdene STX2410-MOD 24V d.c. PSU 27.6V - Selectable 10A 8A 7.2A To Load 0.7A 1.6A 2.6A - Battery Charging

Elmdene STX2410-MOD 24V d.c. PSU 27.6V - Selectable 10A 8A 7.2A To Load 0.7A 1.6A 2.6A - Battery ChargingThe STX2410-MOD is an unboxed PSU for Fire Systems.The new STX range of switch mode power supplies has been specifically designed for EN54 compliant fire systems.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with independent volt free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick diagnostics of the status of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features0.7A 1.6A 2.6A - Battery ChargingSelectable 10A 8A 7.2A To Load24V d.c. PSU 27.6VHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indication27.6V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power reducing power billsLonger life in the fieldLess prone to failureDeep Discharge ProtectionRemote fault signallingFull rated current to load plus additional current for battery chargingLED indicationVolt-free fault output - EPSVolt-free fault output - PSU faultMains transient protection3 Year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 259.37

1

Elmdene 24Vdc 1A Low Profile Door Retainer Power Supply Unit - TRS1

Elmdene 24Vdc 1A Low Profile Door Retainer Power Supply Unit -TRS1The new Elmdene TRS range of power supplies has been specifically designed for access control applications that require remote control of the power supply output. A typical example being where a TRS power supply unit is used to power magnetic door retainers utilising a signal from the fire panel in order to switch off the output to the doors in the event of a fire alarm activation.The TRS PSU has a range of input options which includes the detection of a normally closed contact going open and also removal of a 24V dc signal to provide a fully fail safe operation mode BS 7273 Compliant.The three control input options for remote control of the output are as follows Removal of an external 24V dc supply BS 7273 CompliantOpening of a normally closed volt-free contactClosing of a normally open volt-free contactLED status indicators provide quick diagnostics showing the presence of a mains input and output fuse failure. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Key Features Efficient switch mode operationWide input voltage rangeRemote control of outputChoice of control optionsLED indication within enclosureMains transient protectionFail safe operationScreen printing available3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 54.24

1

Elmdene G2410BM-E 24V 27.6V dc 10A SMPSU - E-Enclosure - Hinge Lid - 420H x 400W x 80D

Elmdene G2410BM-E 24V 27.6V dc 10A SMPSU - E-Enclosure - Hinge Lid - 420H x 400W x 80DThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features420H x 400W x 80DHinge LidE-Enclosure24V 27.6V dc 10A SMPSU27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only.

GBP 247.96

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)