signal sweatshirt from GBP 19 | See the cheapest prices and offers on css.nordicadpartner.dk

Elmdene FIREFOM-12-4 12V Interface Relay

Elmdene FIREFOM-12-4 12V Interface RelayThis range of interface relays are available in 12V and 24V versions and provide 4 8 or 12 individually fused outputs - dependant on model. Each output is selectable to be either permanently on or switched via a remote signal from a Fire Panel or other control device. The remote signal can be either dry contacts NO NC or a low voltage input. Typically used in Access Control applications to remove power from locks while maintaining power to the ACU on a Fire Alarm activation.Key FeaturesProvides 4 individually fused outputsMultiple Trigger configurationsContact rating 8A 12V dcEach output selectable for switched permanently on or disabledLED indication when Relay EnergisedLow current consumptionStandalone device

GBP 20.33

1

Elmdene FIREFOM-12-12 12V Interface Relay Provides 12 Individually Fused Outputs

Elmdene FIREFOM-12-12 12V Interface Relay Provides 12 Individually Fused OutputsThis range of interface relays are available in 12V and 24V versions and provide 4 8 or 12 individually fused outputs - dependant on model. Each output is selectable to be either permanently on or switched via a remote signal from a Fire Panel or other control device.The remote signal can be either dry contacts NO NC or a low voltage input. Typically used in Access Control applications to remove power from locks while maintaining power to the ACU on a Fire Alarm activation.Key FeaturesMultiple Trigger configurationsContact rating 8A 12V dc 4A 24V dcEach output selectable for switched permanently on or disabledLED indication when Relay EnergisedLow current consumptionStandalone device - retrofit into any boxed

GBP 32.96

1

Elmdene FIREFOM-12-8 12V Interface Relay Provides 8 Individually Fused Outputs

Elmdene FIREFOM-12-8 12V Interface Relay Provides 8 Individually Fused OutputsThis range of interface relays are available in 12V and 24V versions and provide 4 8 or 12 individually fused outputs - dependant on model. Each output is selectable to be either permanently on or switched via a remote signal from a Fire Panel or other control device.The remote signal can be either dry contacts NO NC or a low voltage input. Typically used in Access Control applications to remove power from locks while maintaining power to the ACU on a Fire Alarm activation.Key FeaturesMultiple Trigger configurationsContact rating 8A 12V dc 4A 24V dcEach output selectable for switched permanently on or disabledLED indication when Relay EnergisedLow current consumptionStandalone device - retrofit into any boxed

GBP 26.38

1

Elmdene TR4 24Vdc 4A Door Retainer Power Supply Unit

Elmdene TR4 24Vdc 4A Door Retainer Power Supply UnitThe enhanced Elmdene TR range of power supplies has been specifically designed for access control applications that require remote control of the power supply output. A typical example being where a TR power supply unit is used to power magnetic door retainers utilising a signal from the fire panel in order to switch off the output to the doors in the event of a fire alarm activation.The units now have an expanded range of input options which includes the detection of a normally closed contact going open and also removal of a 24V dc signal to provide a fully fail safe operation mode BS 7273 Compliant.The three control input options for remote control of the output are as followsRemoval of an external 24V dc supply BS 7273 CompliantOpening of a normally closed volt-free contactClosing of a normally open volt-free contactLED status indicators provide quick diagnostics showing the presence of a mains input and output fuse failure.Key FeaturesRemote control of outputChoice of control optionsLED indicationMains transient protectionFail safe operation3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 85.75

1

Elmdene TR2 24Vdc 2A Door Retainer Power Supply Unit

Elmdene TR2 24Vdc 2A Door Retainer Power Supply UnitThe enhanced Elmdene TR range of power supplies has been specifically designed for access control applications that require remote control of the power supply output. A typical example being where a TR power supply unit is used to power magnetic door retainers utilising a signal from the fire panel in order to switch off the output to the doors in the event of a fire alarm activation.The units now have an expanded range of input options which includes the detection of a normally closed contact going open and also removal of a 24V dc signal to provide a fully fail-safe operation mode BS 7273 Compliant.The three control input options for remote control of the output are as followsRemoval of an external 24V dc supply BS 7273 CompliantOpening of a normally closed volt-free contactClosing of a normally open volt-free contactLED status indicators provide quick diagnostics showing the presence of a mains input and output fuse failure.Key FeaturesRemote control of outputChoice of control optionsLED indicationMains transient protectionFail safe operation3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 72.35

1

Elmdene 24Vdc 1A Low Profile Door Retainer Power Supply Unit - TRS1

Elmdene 24Vdc 1A Low Profile Door Retainer Power Supply Unit -TRS1The new Elmdene TRS range of power supplies has been specifically designed for access control applications that require remote control of the power supply output. A typical example being where a TRS power supply unit is used to power magnetic door retainers utilising a signal from the fire panel in order to switch off the output to the doors in the event of a fire alarm activation.The TRS PSU has a range of input options which includes the detection of a normally closed contact going open and also removal of a 24V dc signal to provide a fully fail safe operation mode BS 7273 Compliant.The three control input options for remote control of the output are as follows Removal of an external 24V dc supply BS 7273 CompliantOpening of a normally closed volt-free contactClosing of a normally open volt-free contactLED status indicators provide quick diagnostics showing the presence of a mains input and output fuse failure. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Key Features Efficient switch mode operationWide input voltage rangeRemote control of outputChoice of control optionsLED indication within enclosureMains transient protectionFail safe operationScreen printing available3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 54.24

1

Elmdene ACCESS-UL-PSU1 UL294 12V 4A PSU With 4 Way Fused Output Module In G Box

Elmdene ACCESS-UL-PSU1 UL294 12V 4A PSU With 4 Way Fused Output Module In G BoxElmdenes UL294-certified power solutions have been designed for compatibility with the most common access control door controllers. They offer installation flexibility and are a time-saving solution for system designers.These enclosures are engineered to accommodate multiple door controllers providing power integration within access control systems. This enables robust power management to ensure seamless operation and optimised performance of your access control systems.By choosing Elmdenes compliant power solutions you can rest assured that your access control systems will operate smoothly and efficiently. These power solutions are the perfect fit for system designers who value flexibility and reliability in their power supply solutions.This high efficiency cost effective UL294-listed power supplycharger is designed for use in Access Control systems enclosed in two spacious cabinet choices each fitted with locks and tamper switch.Regulated 13.8Vdc output with battery stand-by supplying rated current to 4 independently PTC Fused Outputs resettable fuses individually configured for continuous or switched output current via a fire relay switch with flexible trigger options capable of operating with any external control signal. PSU Universal mains input. Two dry volt free contacts are provided to signal loss of mains and battery output faults.Key FeaturesSingle and Multi-door solutions12V standby battery chargingMulti-fused outputs are providedMains fail reportingBattery Monitoring and Deep Discharge Protection ACCESS-UL-PSU1 and ACCESS-UL-PSU2Independent ancillary relay for applications such as a Fire door release relayIntegration with door controllers including Mercury Security ProWatch HoneywellG Enclosure 440 x 250 x 115

GBP 241.67

1

Elmdene ACCESS-UL-PSU2 UL294 12V 4A PSU With 4 Way Fused Output Module In D Box

Elmdene ACCESS-UL-PSU2 UL294 12V 4A PSU With 4 Way Fused Output Module In D BoxElmdenes UL294-certified power solutions have been designed for compatibility with the most common access control door controllers. They offer installation flexibility and are a time-saving solution for system designers.These enclosures are engineered to accommodate multiple door controllers providing power integration within access control systems. This enables robust power management to ensure seamless operation and optimised performance of your access control systems.By choosing Elmdenes compliant power solutions you can rest assured that your access control systems will operate smoothly and efficiently. These power solutions are the perfect fit for system designers who value flexibility and reliability in their power supply solutions.This high efficiency cost effective UL294-listed power supplycharger is designed for use in Access Control systems enclosed in two spacious cabinet choices each fitted with locks and tamper switch.Regulated 13.8Vdc output with battery stand-by supplying rated current to 4 independently PTC Fused Outputs resettable fuses individually configured for continuous or switched output current via a fire relay switch with flexible trigger options capable of operating with any external control signal. PSU Universal mains input. Two dry volt free contacts are provided to signal loss of mains and battery output faults.Key FeaturesSingle and Multi-door solutions12V standby battery chargingMulti-fused outputs are providedMains fail reportingBattery Monitoring and Deep Discharge Protection ACCESS-UL-PSU1 and ACCESS-UL-PSU2Independent ancillary relay for applications such as a Fire door release relayIntegration with door controllers including Mercury Security ProWatch HoneywellD Enclosure 505 x 407 x 80

GBP 280.66

1

Elmdene RAPIER-6510-NC External Sounder - Grade 3 -Twin Piezo -Twin Strobe amp Twin Comfort LED

Elmdene RAPIER-6510-NC External Sounder - Grade 3 -Twin Piezo -Twin Strobe Twin Comfort LEDThe INCERT approved Rapier 6510 external sounder fully meets the requirements of EN50131-42009 Grade 3. It also includes a host of new and improved features.The sounder now includes a diagnostic LED which will flash to indicate problems with the sounder versatile trigger options and comfort LEDs to signal that the device is working. Control panel dependent end of line resistors also help make installation easier.The Rapier 6510 sounder can be mounted in portrait or landscape orientation giving real flexibility. This is now made easier with the inclusion of two internal spirit levels. The stainless-steel covers clean lines give a smart and aesthetically-pleasing look to the unit.Key FeaturesINCERT ApprovedDesigned to meet the requirements of EN50131-42009 Grade 3Low power operation 10mA standby 180mA full alarm siren strobeBattery and Piezo self-test with fault outputRange of selectable integral EOL tamper resistorsCan be mounted portrait or landscapeAudible tamper closure to assist commissioningSelectable positive hold-off signallingCascade tamper for multiple sounder installationsRemote test inputRing line monitoringSilent engineer modeDiagnostic LEDLED strobeTwin flashing comfort LEDsFull SAB capability

GBP 54.81

1

Elmdene RAPIER-G3P-NC EN50131-4 Security Grade 3 Rapier External Sounder - No Cover

Elmdene RAPIER-G3P-NC EN50131-4 Security Grade 3 Rapier External Sounder - No CoverThe Rapier range of high quality external sounders has been upgraded to fully meet the requirements of the new sounder standard EN50131-42009 Grade 3 and 4. They also include a host of new and improved features.The sounders include a diagnostic LED which will flash to indicate problems with the sounder versatile trigger options and comfort LEDs to signal that the device is working. Control panel dependent end of line resistors also help make installation easier.The Rapier sounders can be mounted in portrait or landscape orientation giving real flexibility. This is now made easier with the inclusion of two internal spirit levels. The stainless-steel covers clean lines give a smart and aesthetically-pleasing look to the unit.Key FeaturesGrade 3Twin PiezoTwin Strobe Twin Comfort LEDs 113db1mGalvanised Steel BackplateSAB operationTwin comfort LEDsRing line monitoringSelf-Test with Fault OutputRemote Test InputSelectable end of line resistorsSelectable cut off timerIntegral spirit levelLandscape or Portrait mounting - 342x221x55Designed to meet the requirements of EN50131-42009 Grade 3 and 4Low power operation 10mA standby 220mA full alarm - siren strobe113dBA sound outputBattery and piezo self-test with fault outputRemote test inputRing line monitoringSilent engineer modeRange of selectable integral EOL tamper resistorsAudible tamper status to assist commissioningLED strobeTwin flashing comfort LEDsFull SAB capabilitySelectable positive hold-off signallingDiagnostic LEDCascade tamper for multiple sounder installationsTwo internal spirit level to aid vertical or horizontal mounting3-year warrantyPlease note This product is for illustrative purposes only. No cover will be provided with this product.

GBP 54.76

1

Elmdene INT400 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT400 EN50131-4 Security Grade 3 Dual Internal Live SounderThe INT400 sounder is used for notification of an alarm condition as generated within an intruder hold-up or other alarm system. In response to commands from the alarm system control panel the INT400 will emit a high intensity sound.The sounder will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT400 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 110db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 18.60

1

Elmdene RAPIER-G3S-NC EN50131-4 Security Grade 3 Rapier External Sounder No Cover

Elmdene RAPIER-G3S-NC EN50131-4 Security Grade 3 Rapier External Sounder No CoverThe Rapier range of high quality external sounders has been upgraded to fully meet the requirements of the new sounder standard EN50131-42009 Grade 3 and 4. They also include a host of new and improved features.The sounders include a diagnostic LED which will flash to indicate problems with the sounder versatile trigger options and comfort LEDs to signal that the device is working. Control panel dependent end of line resistors also help make installation easier.The Rapier sounders can be mounted in portrait or landscape orientation giving real flexibility. This is now made easier with the inclusion of two internal spirit levels. The stainless-steel covers clean lines give a smart and aesthetically-pleasing look to the unit.Key FeaturesGrade 3Twin PiezoTwin Strobe Twin Comfort LEDs 113db1mGalvanised Steel BackplateSAB operationTwin comfort LEDsRing line monitoringSelf-Test with Fault OutputRemote Test InputSelectable end of line resistorsSelectable cut off timerIntegral spirit levelLandscape or Portrait mounting - 342x221x55Designed to meet the requirements of EN50131-42009 Grade 3 and 4Low power operation 10mA standby 220mA full alarm - siren strobe113dBA sound outputBattery and piezo self-test with fault outputRemote test inputRing line monitoringSilent engineer modeRange of selectable integral EOL tamper resistorsPortrait or landscape mountingAudible tamper status to assist commissioningLED strobeTwin flashing comfort LEDsFull SAB capabilitySelectable positive hold-off signallingDiagnostic LEDCascade tamper for multiple sounder installationsTwo internal spirit level to aid vertical or horizontal mounting3-year warrantyPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 90.65

1

Elmdene RAPIER-G3S EN50131-4 Security Grade 3 Rapier External Sounder

Elmdene RAPIER-G3S EN50131-4 Security Grade 3 Rapier External SounderThe Rapier range of high quality external sounders has been upgraded to fully meet the requirements of the new sounder standard EN50131-42009 Grade 3 and 4. They also include a host of new and improved features.The sounders include a diagnostic LED which will flash to indicate problems with the sounder versatile trigger options and comfort LEDs to signal that the device is working. Control panel dependent end of line resistors also help make installation easier.The Rapier sounders can be mounted in portrait or landscape orientation giving real flexibility. This is now made easier with the inclusion of two internal spirit levels. The stainless-steel covers clean lines give a smart and aesthetically-pleasing look to the unit.Key FeaturesGrade 3Twin PiezoTwin Strobe Twin Comfort LEDs 113db1mGalvanised Steel BackplateStainless-steel coverSAB operationTwin comfort LEDsRing line monitoringSelf-Test with Fault OutputRemote Test InputSelectable end of line resistorsSelectable cut off timerIntegral spirit levelLandscape or Portrait mounting - 342x221x55Designed to meet the requirements of EN50131-42009 Grade 3 and 4Low power operation 10mA standby 220mA full alarm - siren strobe113dBA sound outputBattery and piezo self-test with fault outputRemote test inputRing line monitoringSilent engineer modeRange of selectable integral EOL tamper resistorsPortrait or landscape mountingAudible tamper status to assist commissioningLED strobeTwin flashing comfort LEDsFull SAB capabilitySelectable positive hold-off signallingDiagnostic LEDCascade tamper for multiple sounder installationsTwo internal spirit level to aid vertical or horizontal mounting3-year warrantyPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 122.29

1

Elmdene INT500 EN50131-4 Security Grade 3 Dual Internal Live Sounder with Strobe

Elmdene INT500 EN50131-4 Security Grade 3 Dual Internal Live Sounder with StrobeThe INT500 sounder is used for notification of an alarm condition as generated within an intruder hold-up or other alarm system. In response to commands from the alarm system control panel the INT500 will emit a high intensity sound andor operate a visual flash.It will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT500 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 108db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 23.58

1

Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live SounderThe INT600 sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT600 will emit a high intensity sound for alarm and an adjustable low level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT600 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 108db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate 160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 21.85

1

Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live SounderThe INT500S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT500S will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT500S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 30.64

1

Elmdene INT400S EN50131-4 Security Grade 2 Internal Live Sounder

Elmdene INT400S EN50131-4 Security Grade 2 Internal Live SounderThe INT400S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT400S will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT400S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesInternal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 22.49

1

Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live SounderThe INT600S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT600 will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT600S is classified as an internal remote powered sounder and is powered via an external power source.The INT600S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 25.43

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)