Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Vi er 100% dedikerede til Google Annoncering – Vi har mange års erfaring med Google Ads og den bruger vi på at opsætte, optimere & vedligeholde vores fantastiske kunders konti.

100% Specialiseret i Google Ads
Vi har mange års erfaring fra +300 konti
Ingen lange bindinger & evighedskontrakter
Jævnlig opfølgning med hver enkelt kunde
Vi tager din virksomhed seriøst
KONTAKT OS
LÆS UDTALELSER & SUCCESHISTORIER

97 results (0,16226 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Fike Sita ASD Detector with Sounder 205-0001

Fike Sita ASD Detector with Sounder 205-0001

Fike Sita ASD Detector with Sounder 205-0001The Multipoint ASD detectors have set new standards in detector technology. The Addressable ASD detector is used on the Duonet and Quadnet systems. Using microprocessor control these devices offer the installer a full range of detection capabilities with audible and visual warning in one compact device for full DDA compliance. The detectors can be matched to the environment in which they are installed and changed any time during the lifetime of the installation. The mode of detection required can be changed simply by configuring the DIL switch in the detector electronics module configurable via commissioning software on addressable systems. All modes are compliant with European detector type specifications.The Addressable ASD detector offers multiple choices for detection set to a single mode or a combination for a choice of up to 15 different settings. Programmable via a PC or at the panel Quadnet and Duonet only and also has an in-built loop isolator as well as IO for local control and switching.The Multipoint ASD detectors have the unique benefit of an optional full specification integral sounder where 90dBA output can be achieved. The Addressable ASD detector has 7 different sound patterns and 3 volume settings. All Multipoint ASD detectors have the option of an integral combined strobe.Key FeaturesFast short circuit isolator in every device15 combinations of smoke heat detection modesMulti stage alarms - pre alarm feature7 sound patterns - plus off 3 different volume settings - if using SitaMultipoint with integral sounderAuxiliary digital inputs and outputs are available at any AddressableMultipoint deviceAutomatic continuous self-calibrationAddressable Multipoint detector is monitored for all failures of sensor chamber - warning is indicated when a smoke detector head requires servicingMaintenance is made easy with the unique disposable optical chamber designed as a cost effective solution to cleaning and re-calibration

GBP 51.58
1

Fike Sita ASD Detector with Sounder Strobe 205-0012

Fike Sita ASD Detector with Sounder Strobe 205-0012

Fike Sita ASD Detector with Sounder Strobe 205-0012The Multipoint ASD detectors have set new standards in detector technology. The Addressable ASD detector is used on the Duonet and Quadnet systems. Using microprocessor control these devices offer the installer a full range of detection capabilities with audible and visual warning in one compact device for full DDA compliance. The detectors can be matched to the environment in which they are installed and changed any time during the lifetime of the installation. The mode of detection required can be changed simply by configuring the DIL switch in the detector electronics module configurable via commissioning software on addressable systems. All modes are compliant with European detector type specifications.The Addressable ASD detector offers multiple choices for detection set to a single mode or a combination for a choice of up to 15 different settings. Programmable via a PC or at the panel Quadnet and Duonet only and also has an in-built loop isolator as well as IO for local control and switching.The Multipoint ASD detectors have the unique benefit of an optional full specification integral sounder where 90dBA output can be achieved. The Addressable ASD detector has 7 different sound patterns and 3 volume settings. All Multipoint ASD detectors have the option of an integral combined strobe.Key FeaturesFast short circuit isolator in every device15 combinations of smoke heat detection modesMulti stage alarms - pre alarm feature7 sound patterns - plus off 3 different volume settings - if using Sita Multipoint with integral sounderAuxiliary digital inputs and outputs are available at any Addressable Multipoint deviceAutomatic continuous self calibrationAddressable Multipoint detector is monitored for all failures of sensor chamber - warning is indicated when a smoke detector head requires servicingMaintenance is made easy with the unique disposable optical chamber designed as a cost effective solution to cleaning and re-calibration

GBP 62.11
1

Fike 205-0003-B Sita ASD Detector with Base - Black

Fike 205-0003-B Sita ASD Detector with Base - Black

Fike 205-0003-B Sita ASD Detector with Base - BlackThe Multipoint ASD detectors have set new standards in detector technology. The Addressable ASD detector is used on the Duonet and Quadnet systems. Using microprocessor control these devices offer the installer a full range of detection capabilities with audible and visual warning in one compact device for full DDA compliance. The detectors can be matched to the environment in which they are installed and changed any time during the lifetime of the installation. The mode of detection required can be changed simply by configuring the DIL switch in the detector electronics module configurable via commissioning software on addressable systems. All modes are compliant with European detector type specifications.The Addressable ASD detector offers multiple choices for detection set to a single mode or a combination for a choice of up to 15 different settings. Programmable via a PC or at the panel Quadnet and Duonet only and also has an in-built loop isolator as well as IO for local control and switching.The Multipoint ASD detectors have the unique benefit of an optional full specification integral sounder where 90dBA output can be achieved. The Addressable ASD detector has 7 different sound patterns and 3 volume settings. All Multipoint ASD detectors have the option of an integral combined strobe.Key FeaturesMulti-mode detectionSelf-calibratingShort circuit isolatorAuxiliary input facilityColour Black

GBP 48.77
1

Fike 205-0001-NB Sita ASD Detector with Sounder No Base

Fike 205-0001-NB Sita ASD Detector with Sounder No Base

Fike 205-0001-NB Sita ASD Detector with Sounder No BaseThe Multipoint ASD detectors have set new standards in detector technology. The Addressable ASD detector is used on the Duonet and Quadnet systems. Using microprocessor control these devices offer the installer a full range of detection capabilities with audible and visual warning in one compact device for full DDA compliance. The detectors can be matched to the environment in which they are installed and changed any time during the lifetime of the installation. The mode of detection required can be changed simply by configuring the DIL switch in the detector electronics module configurable via commissioning software on addressable systems. All modes are compliant with European detector type specifications.The Addressable ASD detector offers multiple choices for detection set to a single mode or a combination for a choice of up to 15 different settings. Programmable via a PC or at the panel Quadnet and Duonet only and also has an in-built loop isolator as well as IO for local control and switching.The Multipoint ASD detectors have the unique benefit of an optional full specification integral sounder where 90dBA output can be achieved. The Addressable ASD detector has 7 different sound patterns and 3 volume settings. All Multipoint ASD detectors have the option of an integral combined strobe.Key FeaturesFast short circuit isolator in every device15 combinations of smoke heat detection modesMulti stage alarms - pre alarm feature7 sound patterns - plus off 3 different volume settings - if using SitaMultipoint with integral sounderAuxiliary digital inputs and outputs are available at any AddressableMultipoint deviceAutomatic continuous self-calibrationAddressable Multipoint detector is monitored for all failures of sensor chamber - warning is indicated when a smoke detector head requires servicingMaintenance is made easy with the unique disposable optical chamber designed as a cost effective solution to cleaning and re-calibrationNo base

GBP 51.83
1

Fike 205-0001-B Sita ASD Detector with Sounder and Base - Black

Fike 205-0001-B Sita ASD Detector with Sounder and Base - Black

Fike 205-0001-B Sita ASD Detector with Sounder and Base - BlackThe Multipoint ASD detectors have set new standards in detector technology. The Addressable ASD detector is used on the Duonet and Quadnet systems. Using microprocessor control these devices offer the installer a full range of detection capabilities with audible and visual warning in one compact device for full DDA compliance. The detectors can be matched to the environment in which they are installed and changed any time during the lifetime of the installation. The mode of detection required can be changed simply by configuring the DIL switch in the detector electronics module configurable via commissioning software on addressable systems. All modes are compliant with European detector type specifications.The Addressable ASD detector offers multiple choices for detection set to a single mode or a combination for a choice of up to 15 different settings. Programmable via a PC or at the panel Quadnet and Duonet only and also has an in-built loop isolator as well as IO for local control and switching.The Multipoint ASD detectors have the unique benefit of an optional full specification integral sounder where 90dBA output can be achieved. The Addressable ASD detector has 7 different sound patterns and 3 volume settings. All Multipoint ASD detectors have the option of an integral combined strobe.Key FeaturesFast short circuit isolator in every device15 combinations of smoke heat detection modesMulti stage alarms - pre alarm feature7 sound patterns - plus off 3 different volume settings - if using SitaMultipoint with integral sounderAuxiliary digital inputs and outputs are available at any AddressableMultipoint deviceAutomatic continuous self-calibrationAddressable Multipoint detector is monitored for all failures of sensor chamber - warning is indicated when a smoke detector head requires servicingMaintenance is made easy with the unique disposable optical chamber designed as a cost effective solution to cleaning and re-calibration

GBP 66.77
1

Fike 205-0012-NB Sita ASD Detector with Sounder and Strobe No Base

Fike 205-0012-NB Sita ASD Detector with Sounder and Strobe No Base

Fike 205-0012-NB Sita ASD Detector with Sounder and Strobe No BaseThe Multipoint ASD detectors have set new standards in detector technology. The Addressable ASD detector is used on the Duonet and Quadnet systems. Using microprocessor control these devices offer the installer a full range of detection capabilities with audible and visual warning in one compact device for full DDA compliance. The detectors can be matched to the environment in which they are installed and changed any time during the lifetime of the installation. The mode of detection required can be changed simply by configuring the DIL switch in the detector electronics module configurable via commissioning software on addressable systems. All modes are compliant with European detector type specifications.The Addressable ASD detector offers multiple choices for detection set to a single mode or a combination for a choice of up to 15 different settings. Programmable via a PC or at the panel Quadnet and Duonet only and also has an in-built loop isolator as well as IO for local control and switching.The Multipoint ASD detectors have the unique benefit of an optional full specification integral sounder where 90dBA output can be achieved. The Addressable ASD detector has 7 different sound patterns and 3 volume settings. All Multipoint ASD detectors have the option of an integral combined strobe.Key FeaturesFast short circuit isolator in every device15 combinations of smoke heat detection modesMulti stage alarms - pre alarm feature7 sound patterns - plus off 3 different volume settings - if using Sita Multipoint with integral sounderAuxiliary digital inputs and outputs are available at any Addressable Multipoint deviceAutomatic continuous self calibrationAddressable Multipoint detector is monitored for all failures of sensor chamber - warning is indicated when a smoke detector head requires servicingMaintenance is made easy with the unique disposable optical chamber designed as a cost effective solution to cleaning and re-calibrationNo base

GBP 63.18
1

Fike Twinflex Multipoint ASD Detector with Sounder - 204-0001

Fike Twinflex Multipoint ASD Detector with Sounder - 204-0001

Fike Twinflex Multipoint ASD Detector with Sounder - 204-0001Using the ASD Multipoint detector with sounder andor strobe as part of the TWINFLEXpro 2-wire fire alarm system means that when a detector is wired in so is an optional sounder with no extra wiring required. This greatly reduces the number of points that need to be installed and the time it takes to install In fact with the TWINFLEXpro exclusive 2-wire design installation savings can be as high as 40. Multipoint offers 7 different modes of detection which means one device can suit multiple applications. Whatever type of detection is required it can be selected with an easy flick of a switch at the time of commissioning.Sounders can be run on the same pair of wires as detectors andor call pointsNo extra devices needed for audible warningCan differentiate between call point smoke and heat alarmsTwo sound volumes easily selectable by dil switchUsing patented advanced optical scatter sensor design and sophisticated electronic technology Fike delivers reliable smoke andor heat detection significantly reducing the risk of nuisance fire alarms.Key Features7 modes of fire detection including combined smokeheatOptional built-in sounder andor strobe in a single deviceSelf-calibrates every 6 hoursContinuously monitors for dust contaminationEasily removable for maintenance at heightModes of DetectionSmoke 1 Used where ionisation detectors are normally fitted especially when there are high ceilings or a risk of free burning fires chemical stores etc. or fires that need to be detected extremely quickly.Smoke 2Used where optical detectors are normally fitted when there is a risk of a smouldering fire and for escape routes.Smoke 3Designed for use in areas that are prone to nuisance alarms. The reduced sensitivity linked with a time delay feature means that a higher concentration of smoke needs to be present for a constant time period before a fire decision is made. For example this setting is ideal for hotel bedrooms with en-suite shower rooms. The installer or service engineer can change the setting from smoke 2 to smoke 3 if nuisance alarms are a problem whilst still offering optimum protection of a smoke detection setting.Heat 1 Rate of RiseUsed where a standard rate of rise detector would normally be used.Heat 2 Standard Fixed Temperature - 58C approx. Used where a standard fixed temperature heat detector would normally be fitted suitable for kitchens etc.Heat 3 High Fixed Temperature - 90C approx. Used where a high fixed temperature heat detector would normally be fitted. Suitable for commercial kitchens boiler rooms etc.

GBP 39.94
1

Fike Twinflex Multipoint ASD Detector with Sounder Strobe - 204-0012

Fike Twinflex Multipoint ASD Detector with Sounder Strobe - 204-0012

Fike Twinflex Multipoint ASD Detector with Sounder Strobe - 204-0012The Multipoint and ASD detectors have set new standards in detector technology. The TWINFLEX Multipoint head is a 2-wire device used with the TWINFLEX and TWINFLEX Pro systems whereas the addressable ASD detector is used on the Sita200plus Duonet and Quadnet systems. Using microprocessor control these devices offer the installer a full range of detection capabilities with audible and visual warning in one compact device for full DDA compliance. The detectors can be matched to the environment in which they are installed and changed any time during the lifetime of the installation. The mode of detection required can be changed simply by configuring the DIL switch in the detector electronics module configurable via commissioning software on addressable systems. All modes are compliant with European detector type specifications.The addressable ASD detector offers multiple choices for detection set to a single mode or a combination for a choice of up to 15 different settings. Programmable via a PC or at the panel Quadnet and Duonet only and also has an in-built loop isolator as well as IO for local control and switching.The TWINFLEX two-wire Multipoint detector can be set to any one of 3 smoke modes 3 heat modes as well as a Combined Mode Smoke 2 and Heat 2 where a smoke or heat source can trigger a fire decision - see opposite. The end user is given optimum fire protection even if the installer is unsure of the use of the particular area where the detector is sited. All TWINFLEX products including the Multipoint detector feature an End of Line switch negating the need for end-of-line resistors.The Multipoint and ASD detectors have the unique benefit of an optional full specification integral sounder where 90dBA output can be achieved. The two-wire Multipoint detector can be set to 3 different sound patterns as well as switched off with 2 sound output levels. The addressable ASD detector has 7 different sound patterns and 3 volume settings as well as the option of a combined strobe.Key FeaturesIntegral Strobe - The Multipoint ASD can be ordered with an optional integral strobe allowing the 2-wire installation of an advanced smokeheat detector sounder and strobe in a single cost-saving device.Base LED - When the detector head is removed a base mounted LED flashes allowing users to easily identify which head is missing even from considerable distance e.g. in a high-ceiling building.Head Removal Tool - The Multipoint ASD detector removal tool fits the Solo Detector Tester pole for easy testing and maintenance at height.Optical Chamber - The Multipoint ASD detector incorporates a new advanced optical chamber for enhanced smoke detection.Modes of DetectionSmoke 1 Used where ionisation detectors are normally fitted especially when there are high ceilings or a risk of free burning fires chemical stores etc. or fires that need to be detected extremely quickly.Smoke 2Used where optical detectors are normally fitted when there is a risk of a smouldering fire and for escape routes.Smoke 3Designed for use in areas that are prone to nuisance alarms. The reduced sensitivity linked with a time delay feature means that a higher concentration of smoke needs to be present for a constant time period before a fire decision is made. For example this setting is ideal for hotel bedrooms with en-suite shower rooms. The installer or service engineer can change the setting from smoke 2 to smoke 3 if nuisance alarms are a problem whilst still offering optimum protection of a smoke detection setting.Heat 1 Rate of RiseUsed where a standard rate of rise detector would normally be used.Heat 2 Standard Fixed Temperature - 58C approx. Used where a standard fixed temperature heat detector would normally be fitted suitable for kitchens etc.Heat 3 High Fixed Temperature - 90C approx. Used where a high fixed temperature heat detector would normally be fitted. Suitable for commercial kitchens boiler rooms etc.

GBP 60.25
1

Fike 402-0007 Twinflex Weatherproof Manual Call Point With Cover

Fike 402-0007 Twinflex Weatherproof Manual Call Point With Cover

Fike 402-0007 Twinflex Weatherproof Manual Call Point With CoverAn IP65 weatherproof Manual Call Point with Re-settable element reset key back box and inbuilt End of Line set by DIL Switch.The Twinflex Manual Call Point MCP allows for user activation of the fire alarmsystem. Once operated the device latches into the alarm position and requires manuallyresetting via a special key.This device is compatible with the range of Twinflex Fire Alarm Control Panels andcomprises a 2-wire zone-powered Manual Call Point MCP. This device may be installedon the same zone as the Twinflex Multipoint detectorsounder and other associatedTwinflex devices.Key FeaturesComes with re-settable element reset key back box and inbuilt End of Line set by DIL SwitchIP65 RatedSupplied with protective cover

GBP 37.27
1

Fike 204-0001-B Twinflex Multipoint ASD Detector with Sounder - Black

Fike 204-0001-B Twinflex Multipoint ASD Detector with Sounder - Black

Fike 204-0001-B Twinflex Multipoint ASD Detector with Sounder - BlackUsing the ASD Multipoint detector with sounder andor strobe as part of the TWINFLEXpro 2-wire fire alarm system means that when a detector is wired in so is an optional sounder with no extra wiring required. This greatly reduces the number of points that need to be installed and the time it takes to install In fact with the TWINFLEXpro exclusive 2-wire design installation savings can be as high as 40. Multipoint offers 7 different modes of detection which means one device can suit multiple applications. Whatever type of detection is required it can be selected with an easy flick of a switch at the time of commissioning.Sounders can be run on the same pair of wires as detectors andor call pointsNo extra devices needed for audible warningCan differentiate between call point smoke and heat alarmsTwo sound volumes easily selectable by dil switchUsing patented advanced optical scatter sensor design and sophisticated electronic technology Fike delivers reliable smoke andor heat detection significantly reducing the risk of nuisance fire alarms.Key Features7 modes of fire detection including combined smokeheatOptional built-in sounder andor strobe in a single deviceSelf-calibrates every 6 hoursContinuously monitors for dust contaminationEasily removable for maintenance at heightModes of DetectionSmoke 1 Used where ionisation detectors are normally fitted especially when there are high ceilings or a risk of free burning fires chemical stores etc. or fires that need to be detected extremely quickly.Smoke 2Used where optical detectors are normally fitted when there is a risk of a smouldering fire and for escape routes.Smoke 3Designed for use in areas that are prone to nuisance alarms. The reduced sensitivity linked with a time delay feature means that a higher concentration of smoke needs to be present for a constant time period before a fire decision is made. For example this setting is ideal for hotel bedrooms with en-suite shower rooms. The installer or service engineer can change the setting from smoke 2 to smoke 3 if nuisance alarms are a problem whilst still offering optimum protection of a smoke detection setting.Heat 1 Rate of RiseUsed where a standard rate of rise detector would normally be used.Heat 2 Standard Fixed Temperature - 58C approx. Used where a standard fixed temperature heat detector would normally be fitted suitable for kitchens etc.Heat 3 High Fixed Temperature - 90C approx. Used where a high fixed temperature heat detector would normally be fitted. Suitable for commercial kitchens boiler rooms etc.

GBP 54.48
1

Fike FIK-UV-IR-F-HD-AS11 UVIR Detector With HD Video Output Hydrocarbon Fires Only

Fike FIK-UV-IR-F-HD-AS11 UVIR Detector With HD Video Output Hydrocarbon Fires Only

Fike FIK-UV-IR-F-HD-AS11 UVIR Detector With HD Video Output Hydrocarbon Fires OnlyThe UV-IR-HD-F flame detector provides ultra-fast response high performance and reliable detection of a large variety of fires including hydrocarbon fires visible and non- visible. The detector addresses slow growing fires as well as fast eruptions of fire using improved UV-IR technology. The detector operates in all weather and light conditions.The detector provides high-definition HD video output of the monitored area with clear imaging of a fire event and of personnel at distances up to 100 ft. 30m allowing rescuers to know the exact situation before entering the hazardous area. It will automatically record a video of a fire event 1 min pre-alarm up to 3 min post-alarm.Add to that the integral HD quality video with event recording on top of the proven superior capabilities of UV-IR flame detection and you have a very powerful safety tool to protect your personnel plant and process.Key FeaturesHigh immunity to false alarmHydrocarbon flame detection. Spectrum response of IR radiation in the 4.0-5.0 micron rangeUltra-fast detection mode detection within 5 milliseconds for fireballs or explosionsHigh sensitivity up to 100 ft. 30m for a 1 ft2 0.1m2 nheptane pan fireHD video output with Automatic HD video recording of fire events. Data Event logger alarms faults and other relevant events are logged to non-volatile memoryEthernet communication - in addition to the standard methods such as 4-20mA and Modbus.Built-in-Test BIT Automatic and manual internal self-test of window cleanliness and the overall operation of the detectorWindow heater to avoid condensation and icingTilt mounting bracket can be connected either above or below the detectorUV and IR warning levels 0-20mA Current output warning when elevated UV or IR radiation is detected

GBP 3938.11
1

Fike FIK-UV-IR-HD-AS11 UVIR Detector With HD Video Output Hydrocarbon amp Non-Hydrocarbon

Fike FIK-UV-IR-HD-AS11 UVIR Detector With HD Video Output Hydrocarbon amp Non-Hydrocarbon

Fike FIK-UV-IR-HD-AS11 UVIR Detector With HD Video Output Hydrocarbon Non-HydrocarbonThe UV-IR flame detector provides ultra-fast response high performance and reliable detection of a large variety of fires including hydrocarbon fires visible and non- visible as well as Hydrogen fires. The detector addresses slow growing fires as well as fast eruptions of fire using improved UV-IR technology. The detector operates in all weather and light conditions.The detector provides high-definition HD video output of the monitored area with clear imaging of a fire event and of personnel at distances up to 100 ft. 30m allowing rescuers to know the exact situation before entering the hazardous area. It will automatically record a video of a fire event 1 min pre-alarm up to 3 min post-alarm.Add to that the integral HD quality video with event recording on top of the proven superior capabilities of UV-IR flame detection and you have a very powerful safety tool to protect your personnel plant and process.Key FeaturesHigh immunity to False AlarmUltra-fast detection mode detection within 5 milliseconds for fireballs or explosionsHydrogen and Hydrocarbons flame detectionHigh sensitivity up to 100 ft. 30m for a 1 ft2 0.1m2 nheptane pan fireHD video output with Automatic HD video recording of fire events. DataEvent logger Alarms faults and other relevant events are logged to non-volatile memoryEthernet communication in addition to the standard methods such as 4-20mA and ModbusBuilt-in-Test BIT Automatic and manual internal self-test of window cleanliness and the overall operation of the detector for both IR and UV channelsWindow heater to avoid condensation and icingTilt mounting bracket can be connected either above or below the detectorUV and IR warning levels 0-20mA Current output warning when elevated UV or IR radiation is detected

GBP 3938.11
1

Fike FIK-IR3-HD-AS11 Triple IR Detector With HD Video Output

Fike FIK-IR3-HD-AS11 Triple IR Detector With HD Video Output

Fike FIK-IR3-HD-AS11 Triple IR Detector With HD Video OutputThe IR3-HD flame detector provides ultra-fast response high performance and reliable detection of all types of hydrocarbon fires visible and non-visible.The detector addresses slow growing fires as well as fast eruption of fire using improved triple IR IR3 technology. It operates in all weather and light conditions with highest immunity to false alarms.Key FeaturesHigh Immunity to False AlarmExtreme sensitivity up to 260 ft. 80m for a 1 ft2 0.1m2 n-heptane pan fireUltra-fast detection mode detection within 40 milliseconds for fireballs or explosions1.2 second detection time for 1 ft2 0.1m2 n-heptane pan fire at up to 50 ft. 15m distanceHD video output with Automatic HD video recording of fire events. DataEvent logger Alarms faults and other relevant events are logged to non-volatile memoryBuilt-in-Test BIT Automatic and manual self-test of window cleanliness and the overall operation of the detectorWindow heater to avoid condensation and icingTilt mounting bracket can be connected either above or below the detector

GBP 4567.84
1

Fike FIK-IR3-H2-HD-AS11 Triple IR Hydrogen Flame Detector With HD Video Output

Fike FIK-IR3-H2-HD-AS11 Triple IR Hydrogen Flame Detector With HD Video Output

Fike FIK-IR3-H2-HD-AS11 Triple IR Hydrogen Flame Detector With HD Video OutputThe IR3-H2-HD flame detector provides ultra-fast response high performance and reliable detection for a number of fires found in Energy Transition applications. The detector addresses slow growing fires as well as fast eruptions of fire using improved IR3 technology. The detector operates in all weather and light conditions.The detector provides high-definition HD video output of the monitored area with clear imaging of a fire event and of personnel at distances up to 100 ft. 30m. This allows the rescue team to be aware of the exact situation before entering the hazardous area. Video and data of events are stored and saved quickly to non-volatile memory for post incident investigation. The recordings start one minute before detection and continue for up to four minutes.Key FeaturesHigh immunity to false alarm including arc weldingUltra-fast detection mode detection within 40 milliseconds for Hydrogen fireballs or explosionsDetects hydrogen ammonia methane Syngas flames 3 infrared wavelengths with clear separation.Five selectable sensitivity levelsHD or composite video output with automatic HD video recording of eventsDataEvent logger alarms faults and other relevant events are logged to non-volatile memoryUniversal outputs 3 and 4 wire 4-20 mA sinksource Fire Auxiliary and Fault Relays RS485 port using Modbus RTUBuilt-in-Test BIT Automatic and manual self-test of window cleanliness and overall detector operationWindow heater to avoid condensation and icingStainless steel tilt mount adjustable horizontallyvertically

GBP 4874.34
1

Fike 505-0010 TwinflexPro2 Repeater Panel

Fike 505-0010 TwinflexPro2 Repeater Panel

Fike 505-0010 TwinflexPro2 Repeater PanelThe TWINFLEXpro2 repeater panel is smaller than the TWINFLEXpro2 control panel. It does not connect to or control detection devices. Instead it connects to a control panel and reports events which occur on the control panel. It can also perform system controls over the network i.e. Silence Alarms Reset Sound Alarms Silence Buzzer.A maximum of 8 repeater panels can be connected to a single control panel. The maximum cable length from the control panel to a repeater is 500 metres. If 8 repeaters are used they must all be within the maximum 500 metres cable length. All external connections are made on the back board. The Ext Switches on the back board are not currently used and are for a future development.Key FeaturesCompatible with all Twinflex Pro2 control panelsReports Twinflex Pro panel events to a remote locationCapable of performing system controls i.e. Silence Alarms Reset Sound Alarms Silence BuzzerMaximum of 8 repeater panels can be connected to a single control panelPlease Note The repeater will only work with the 4 8 Zone TwinflexPro2 panels using version 2.0 software.

GBP 183.98
1