Guhring 3806 6.00mm Carbide 4 Flute Plain Shank Long Length End Mills Guhring RF 100 VA High-performance Roughing End Mills are for Stainless Steels, they excel at machining these metals thanks to unequal helix angles which considerably reduces vibration. The uneven helix angle vastly improves surface quality for finishing operations and a considerably higher feed rate for slot drilling and roughing operations are also achieved. With many applications. Surface finish - nano-A Other advantages of RF 100 VA Endmills are: Suitable for roughing and finishing. Up to 60% higher feed rates. Up to 4-times longer tool life. Vibration-free operation. Improved work piece surface quality. Optimal suitability for stainless steel up to and above 750 N/mm2. Limited suitability for steel up to 850 N/mm2 and Ni based Ti special alloys. GBP 0.00 1
Guhring 3806 12.00mm Carbide 4 Flute Plain Shank Long Length End Mills Guhring RF 100 VA High-performance Roughing End Mills are for Stainless Steels, they excel at machining these metals thanks to unequal helix angles which considerably reduces vibration. The uneven helix angle vastly improves surface quality for finishing operations and a considerably higher feed rate for slot drilling and roughing operations are also achieved. With many applications. Surface finish - nano-A Other advantages of RF 100 VA Endmills are: Suitable for roughing and finishing. Up to 60% higher feed rates. Up to 4-times longer tool life. Vibration-free operation. Improved work piece surface quality. Optimal suitability for stainless steel up to and above 750 N/mm2. Limited suitability for steel up to 850 N/mm2 and Ni based Ti special alloys. GBP 0.00 1
Guhring 3806 16.00mm LONG LENGTHPLAINSHANK END MILL Guhring RF 100 VA High-performance Roughing End Mills are for Stainless Steels, they excel at machining these metals thanks to unequal helix angles which considerably reduces vibration. The uneven helix angle vastly improves surface quality for finishing operations and a considerably higher feed rate for slot drilling and roughing operations are also achieved. With many applications. Surface finish - nano-A Other advantages of RF 100 VA Endmills are: Suitable for roughing and finishing. Up to 60% higher feed rates. Up to 4-times longer tool life. Vibration-free operation. Improved work piece surface quality. Optimal suitability for stainless steel up to and above 750 N/mm2. Limited suitability for steel up to 850 N/mm2 and Ni based Ti special alloys. GBP 0.00 1
Guhring 3806 8.00mm Carbide 4 Flute Plain Shank Long Length End Mills Guhring RF 100 VA High-performance Roughing End Mills are for Stainless Steels, they excel at machining these metals thanks to unequal helix angles which considerably reduces vibration. The uneven helix angle vastly improves surface quality for finishing operations and a considerably higher feed rate for slot drilling and roughing operations are also achieved. With many applications. Surface finish - nano-A Other advantages of RF 100 VA Endmills are: Suitable for roughing and finishing. Up to 60% higher feed rates. Up to 4-times longer tool life. Vibration-free operation. Improved work piece surface quality. Optimal suitability for stainless steel up to and above 750 N/mm2. Limited suitability for steel up to 850 N/mm2 and Ni based Ti special alloys. GBP 0.00 1
Guhring 3630 5.00mm FIRE COAT CARBIDE INOX END MILL Guhring?s Unequal Helix Milling Cutters provide productivity benefits of up to 60% higher feed rates and longer tool life.These cutters are suitable for roughing and finishing giving vibration free machining and increased surface quality. Manufactured to DIN 6527 GBP 0.00 1
Guhring 3630 12.00mm FIRE COAT CARBIDE INOX END MILL Guhring?s Unequal Helix Milling Cutters provide productivity benefits of up to 60% higher feed rates and longer tool life.These cutters are suitable for roughing and finishing giving vibration free machining and increased surface quality. Manufactured to DIN 6527 GBP 0.00 1
Guhring 3630 4.00mm FIRE COAT CARBIDE INOX END MILL Guhring?s Unequal Helix Milling Cutters provide productivity benefits of up to 60% higher feed rates and longer tool life.These cutters are suitable for roughing and finishing giving vibration free machining and increased surface quality. Manufactured to DIN 6527 GBP 0.00 1
Guhring 1228 3.70mm HSCO GT80 STUBS-DRILL Series 1228 HSCO Straight Shank Stub Drills Tin Coated - Metric Co-alloyed high speed steel,Special geometry.Increased wear resistance For higher tensile steels long chipping materials up to 1000 N/mm Al- and Cu alloys ,soft bronzes,electrolytic copper,ductile brass GBP 0.00 1
Guhring 245 10.80mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 9.80mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 41/64" HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Inch To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 25/64" HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Inch To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 21.50mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 6.50mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 6.80mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 5/8" HSS TAPER SHANKD RILL Series 245 HSS Taper Shank Drills Inch To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 17.25mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 15.00mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 12.50mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 14.00mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 12.90mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 8.75mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 20.50mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 13.00mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1
Guhring 245 36.00mm HSS TAPER SHANK DRILL Series 245 HSS Taper Shank Drills Metric To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN 345. GBP 0.00 1