Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Vi er 100% dedikerede til Google Annoncering – Vi har mange års erfaring med Google Ads og den bruger vi på at opsætte, optimere & vedligeholde vores fantastiske kunders konti.

100% Specialiseret i Google Ads
Vi har mange års erfaring fra +300 konti
Ingen lange bindinger & evighedskontrakter
Jævnlig opfølgning med hver enkelt kunde
Vi tager din virksomhed seriøst
KONTAKT OS
LÆS UDTALELSER & SUCCESHISTORIER

26 results (0,15359 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

John Guest 15MM X 1/2" BSP Ring Main Stem Adaptor

John Guest 15MM X 1/2" BSP Ring Main Stem Adaptor

Stem Adaptors Converts push-fit to male thread. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range: Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values: Size: 3/8" - Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2" - Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4" - Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1" - Plastic threads: N/A. Metal threads: N/A.

GBP 3.39
1

John Guest 18MM Ring Main Black Plug

John Guest 18MM Ring Main Black Plug

Plug Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.69
1

John Guest 15MM Ring Main Black Plug

John Guest 15MM Ring Main Black Plug

Plug Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 1.99
1

John Guest 12MM X 1/2" BSP Ring Main Stem Adaptor

John Guest 12MM X 1/2" BSP Ring Main Stem Adaptor

Stem Adaptors Converts push-fit to male thread. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range: Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values: Size: 3/8" - Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2" - Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4" - Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1" - Plastic threads: N/A. Metal threads: N/A.

GBP 1.89
1

John Guest 12MM X 3/8" BSP Ring Main Stem Adaptor

John Guest 12MM X 3/8" BSP Ring Main Stem Adaptor

Stem Adaptors Converts push-fit to male thread. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range: Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values: Size: 3/8" - Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2" - Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4" - Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1" - Plastic threads: N/A. Metal threads: N/A.

GBP 1.59
1

John Guest 28MM Ring Main Black Plug

John Guest 28MM Ring Main Black Plug

Plug Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.09
1

John Guest 12mm RINGMAIN BLACK PLUG

John Guest 12mm RINGMAIN BLACK PLUG

Plug Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 1.39
1

John Guest 12MM Ring Main End Stop

John Guest 12MM Ring Main End Stop

End Stop Provides permanent or temporary shut off. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.99
1

John Guest 22MM X 1/2" BSP Ring Main Stem Adaptor

John Guest 22MM X 1/2" BSP Ring Main Stem Adaptor

Stem Adaptors Converts push-fit to male thread. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range: Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values: Size: 3/8" - Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2" - Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4" - Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1" - Plastic threads: N/A. Metal threads: N/A.

GBP 3.09
1

John Guest 15MM X 3/8" BSP Ring Main Stem Adaptor

John Guest 15MM X 3/8" BSP Ring Main Stem Adaptor

Stem Adaptors Converts push-fit to male thread. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range: Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values: Size: 3/8" - Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2" - Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4" - Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1" - Plastic threads: N/A. Metal threads: N/A.

GBP 1.59
1

John Guest 15MM Ring Main Stop End

John Guest 15MM Ring Main Stop End

End Stop Provides permanent or temporary shut off. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 2.69
1

John Guest 22MM X 3/4" BSP Ring Main Stem Adaptor

John Guest 22MM X 3/4" BSP Ring Main Stem Adaptor

Stem Adaptors Converts push-fit to male thread. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range: Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values: Size: 3/8" - Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2" - Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4" - Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1" - Plastic threads: N/A. Metal threads: N/A.

GBP 3.49
1

John Guest 22MM Ring Main Stop End

John Guest 22MM Ring Main Stop End

End Stop Provides permanent or temporary shut off. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.09
1

John Guest 22MM Ring Main Black Plug

John Guest 22MM Ring Main Black Plug

Plug Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 2.59
1

John Guest 15MM-12MM Ring Main Reducer

John Guest 15MM-12MM Ring Main Reducer

Reducer Use with other fittings and pipe to reduce pipe sizes. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.99
1

John Guest 15MM-10MM Ring Main Reducer

John Guest 15MM-10MM Ring Main Reducer

Reducer Use with other fittings and pipe to reduce pipe sizes. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.79
1

5x John Guest 15MM Ring Main Collet Cover

5x John Guest 15MM Ring Main Collet Cover

Collet Covers Prevent accidental removal or tampering with piping. Can be removed to allow the pipe to be disconnected as and when required. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 2.30
1

5x John Guest 12MM Ring Main Collet Cover

5x John Guest 12MM Ring Main Collet Cover

Collet Covers Prevent accidental removal or tampering with piping. Can be removed to allow the pipe to be disconnected as and when required. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 1.85
1

5x John Guest 22MM Ring Main Collet Cover

5x John Guest 22MM Ring Main Collet Cover

Collet Covers Prevent accidental removal or tampering with piping. Can be removed to allow the pipe to be disconnected as and when required. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 2.95
1

John Guest 15RA Release Aid

John Guest 15RA Release Aid

Release Aid The action of pressure in a system could increase the grip of the collect. The release aid allows a firmer grip on the collect while removing the pipe. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 1.29
1

John Guest 28RA Release Aid

John Guest 28RA Release Aid

Release Aid The action of pressure in a system could increase the grip of the collect. The release aid allows a firmer grip on the collect while removing the pipe. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 1.29
1

John Guest 12MM Ring Main Stem Elbow

John Guest 12MM Ring Main Stem Elbow

Stem Elbow Provides a Swivel type connector. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Designed to simplify pipe connections in restricted spaces, the Stem Elbow gives an instant swivel fitting so a pipe can be orientated in any direction. Can be used with an elbow to make 'U' turn connection. Please note a collet cover cannot be used on a Speedfit end assembled with the stem of a 22mm Stem Elbow. Can be used with a Tee. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.39
1

John Guest 18mm RINGMAIN STEM ELBOW

John Guest 18mm RINGMAIN STEM ELBOW

Stem Elbow Provides a Swivel type connector. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Designed to simplify pipe connections in restricted spaces, the Stem Elbow gives an instant swivel fitting so a pipe can be orientated in any direction. Can be used with an elbow to make 'U' turn connection. Please note a collet cover cannot be used on a Speedfit end assembled with the stem of a 22mm Stem Elbow. Can be used with a Tee. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.99
1

John Guest 15MM Ring Main Equal Tee

John Guest 15MM Ring Main Equal Tee

This range of Equal Tees is designed to easily join pipes of the same size of nylon, copper or aluminium as well as a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. Designed with a push-fit system, the products provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, with no need to prepare threaded pipe or solvent. The system can be disconnected, altered and extended easily. Available in a variety of sizes to suit your specific needs. Features and Benefits Push-fit technology is simple to use as well as being able to hold pipes firmly in poisition Quick disconnection without the need for tools to save you time All fittings are of Food Quality and suitable for potable liquids for versatility and safety of use in food applications Suitable for soft metal or plastic tubes as well as with air or inert gases for a wide range of suitable applications Designed with superior flow characteristics Typical Applications Plumbing Notes Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar Temperature: +70C. Pressure: 7bar Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD Maximum Torque Values: Size: 3/8in. Plastic threads: 3.0Nm. Metal threads: N/A Size: 1/2in. Plastic threads: 3.0Nm. Metal threads: 4.0Nm Size: 3/4in. Plastic threads: 4.0Nm. Metal threads: 5.0Nm Size: 1in. Plastic threads: N/A. Metal threads: N/A

GBP 3.39
1

John Guest 12MM Ring Main Equal Tee

John Guest 12MM Ring Main Equal Tee

This range of Equal Tees is designed to easily join pipes of the same size of nylon, copper or aluminium as well as a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. Designed with a push-fit system, the products provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, with no need to prepare threaded pipe or solvent. The system can be disconnected, altered and extended easily. Available in a variety of sizes to suit your specific needs. Features and Benefits Push-fit technology is simple to use as well as being able to hold pipes firmly in poisition Quick disconnection without the need for tools to save you time All fittings are of Food Quality and suitable for potable liquids for versatility and safety of use in food applications Suitable for soft metal or plastic tubes as well as with air or inert gases for a wide range of suitable applications Designed with superior flow characteristics Typical Applications Plumbing Notes Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar Temperature: +70C. Pressure: 7bar Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD Maximum Torque Values: Size: 3/8in. Plastic threads: 3.0Nm. Metal threads: N/A Size: 1/2in. Plastic threads: 3.0Nm. Metal threads: 4.0Nm Size: 3/4in. Plastic threads: 4.0Nm. Metal threads: 5.0Nm Size: 1in. Plastic threads: N/A. Metal threads: N/A

GBP 3.19
1