flex haveslange from GBP 9 | See the cheapest prices and offers on css.nordicadpartner.dk

KAC M2A-R680SG-K013-01 Red Surface Break Glass Indoor Call Point Flame 680 OHM

KAC M2A-R680SG-K013-01 Red Surface Break Glass Indoor Call Point Flame 680 OHMThe KAC range of Call Points are fully compliant with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only. All MCP2 products are supplied with an LED indicator as standard.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 16.01

1

KAC M4A-W000SG-K013-12 White Double Pole Surface Glass Indoor Manual Call Point With Emergency Door Release Marking

KAC M4A-W000SG-K013-12 White Double Pole Surface Glass Indoor Manual Call Point With Emergency Door Release MarkingInstallation efficiency and flexibility are at the heart of the new MCP Indoor Call Point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation see wiring diagram overleaf.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics

GBP 39.31

1

KAC M4A-B000SF-K013-11 Blue Double Pole Surface Flexible Element Indoor Manual Call Point With Plain Marking

KAC M4A-B000SF-K013-11 Blue Double Pole Surface Flexible Element Indoor Manual Call Point With Plain MarkingInstallation efficiency and flexibility are at the heart of the new MCP Indoor Call Point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation see wiring diagram overleaf.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics

GBP 27.73

1

KAC W4A-R000SG-K013-01 Red Double Pole Surface Break Glass Outdoor Manual Call Point House Flame Marking

KAC W4A-R000SG-K013-01 Red Double Pole Surface Break Glass Outdoor Manual Call Point House Flame MarkingInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 72.90

1

KAC M4A-G000SF-STCK-12 Green Double Pole Surface Flexible Element Indoor Manual Call Point With Emergency Door Release Marking

KAC M4A-G000SF-STCK-12 Green Double Pole Surface Flexible Element Indoor Manual Call Point With Emergency Door Release MarkingInstallation efficiency and flexibility are at the heart of the new MCP Indoor Call Point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation see wiring diagram overleaf.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics

GBP 27.73

1

KAC W4A-G000SG-K013-11 Green Double Pole Surface Break Glass Outdoor Manual Call Point Plain Marking

KAC W4A-G000SG-K013-11 Green Double Pole Surface Break Glass Outdoor Manual Call Point Plain MarkingInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 96.01

1

KAC WCP1A-R-470 Red Waterproof Break Glass Call Point - IP67 - 470 Ohm

KAC WCP1A-R-470 Red Waterproof Break Glass Call Point - IP67 - 470 OhmThe WCP1A-R-470 is Red Waterproof Break Glass Call Point. KAC offer an unparalleled range of indoor and outdoor break glass re-settable and key operated call points.The latest WCP ranges have dual connection options with the use of the patented plug play terminal block concept. After wiring the terminal connector plug into the appropriate position.1A 1B models are supplied with a 470Ohm resistor fitted in series but can also be connected without the resistor short cct. They have a Single Pole changeover contact rated at 30vdc.Key FeaturesColour RedSealed to IP67Unique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsCPD Approved

GBP 66.83

1

KAC WCP1A-R-470-IS Red Waterproof Intrinsically Safe Call Point - 470 Ohm

KAC WCP1A-R-470-IS Red Waterproof Intrinsically Safe Call Point - 470 OhmThe WCP1A-R-470-IS is Red Waterproof Intrinsically Safe Call Point. KAC offer an unparalleled range of indoor and outdoor break glass re-settable and key operated call points.The latest WCP ranges have dual connection options with the use of the patented plug play terminal block concept. After wiring the terminal connector plug into the appropriate position.1A 1B models are supplied with a 470 resistor fitted in series but can also be connected without the resistor short cct. They have a Single Pole changeover contact rated at 30vdc.Key FeaturesColour RedIntrinsically SafeUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsCPD Approved

GBP 77.63

1

KAC WCP1A-R-470-R Red Waterproof Call Point - IP67 - 470 Ohm - Resettable

KAC WCP1A-R-470-R Red Waterproof Call Point - IP67 - 470 Ohm - ResettableThe WCP1A-R-470-R is a resettable Red Waterproof Call Point. KAC offer an unparalleled range of indoor and outdoor break glass re-settable and key operated call points.The latest WCP ranges have dual connection options with the use of the patented plug play terminal block concept. After wiring the terminal connector plug into the appropriate position.1A 1B models are supplied with a 470Ohm resistor fitted in series but can also be connected without the resistor short cct. They have a Single Pole changeover contact rated at 30vdc.Key FeaturesColour RedIP Rating IP67ResettableUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsCPD Approved

GBP 60.08

1

KAC M4A-B000SG-K013-11 Blue Double Pole Surface Glass Indoor Manual Call Point With A Double Pole With Plain Marking

KAC M4A-B000SG-K013-11 Blue Double Pole Surface Glass IndoorManual Call Point With A Double Pole With Plain MarkingInstallation efficiency flexibility and full compliancewith the latest standards are at the heart of the new MCP indoor call pointrange. Installation time and ultimately cost are of paramount importance toany fire or security installer. The MCP range directly reflects this need byproviding a unique plug and play concept designed specifically to reduceinstallation time. All new MCP products utilise a special terminal block whereall initial installation cabling is terminated. This terminal block is thensimply connected to the back of the MCP. Simple but effective with nore-termination required and no time wasted.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 38.52

1

KAC W1A-R470SG-STCK-01 Red Surface Break Glass Outdoor Manual Call Point House Flame Logo

KAC W1A-R470SG-STCK-01 Red Surface Break Glass Outdoor Manual Call Point House Flame LogoThe W1A-R470SG-STCK-01 is Red Waterproof Break Glass Call Point. KAC offer an unparalleled range of indoor and outdoor break glass re-settable and key operated call points.The latest range have dual connection options with the use of the patented plug play terminal block concept. After wiring the terminal connector plug into the appropriate position.1A 1B models are supplied with a 470Ohm resistor fitted in series but can also be connected without the resistor short cct. They have a Single Pole changeover contact rated at 30vdc.Key FeaturesColour RedSealed to IP67Unique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsCPD Approved

GBP 80.60

1

KAC MCP4A-R-SR Red Break Glass Call Point - Double Pole - NONC Surface

KAC MCP4A-R-SR Red Break Glass Call Point - Double Pole - NONC SurfaceInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 31.56

1

KAC MCP4A-B-SB Blue Break Glass Call Point - Double Pole - NONC Surface

KAC MCP4A-B-SB Blue Break Glass Call Point - Double Pole - NONC SurfaceInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 35.94

1

KAC MCP4A-W-SW White Break Glass Call Point - Double Pole - NONC Surface

KAC MCP4A-W-SW White Break Glass Call Point - Double Pole - NONC SurfaceInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 32.91

1

KAC MCP1A-R-470-SR-IS Red Intrinsically Safe Call Point - Surface - 470Ohm

KAC MCP1A-R-470-SR-IS Red Intrinsically Safe Call Point - Surface - 470OhmThe MCP1A-R-470-SR-IS is a Red Intrinsically Safe Call Point.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options.Key FeaturesColour Red470OhmUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibility

GBP 14.01

1

KAC MCP4A-G-SG Green Break Glass Call Point - Double Pole - NONC Surface

KAC MCP4A-G-SG Green Break Glass Call Point - Double Pole - NONC SurfaceInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 21.43

1

KAC M3A-Y000SF-K013-11 MCP3A Call Point - Yellow - NONC - Surface - fe1140-plain

KAC M3A-Y000SF-K013-11 MCP3A Call Point - Yellow - NONC - Surface - fe1140-plainInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocks.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standards

GBP 22.40

1

KAC MCP1A-R-470 Red Break Glass Call Point - 470 Ohm Flush

KAC MCP1A-R-470 Red Break Glass Call Point - 470 Ohm FlushThe MCP1A-R-470 is a Red Break Glass Call Point.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options.Key FeaturesColour Red470OhmUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 8.75

1

KAC M2A-R470SG-K013-01 Red Break Glass Call Point with LED - 470 Ohm Surface

KAC M2A-R470SG-K013-01 Red Break Glass Call Point with LED - 470 Ohm SurfaceInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.All MCP2 products are supplied with an LED indicator as standard.The MCP2A Product version is supplied with both an LEDresistor and normally open clean contact electrical options. These options are simply utilised by attaching the terminal block to the required connection in the back of the MCP product.Key FeaturesColour Red470OhmUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 14.22

1

KAC M4A-G000SF-K013-13 Green Double Pole Surface Flexible Element Indoor Manual Call Point - Double Pole - Running Man Graphic Marking

KAC M4A-G000SF-K013-13 Green Double Pole Surface Flexible Element Indoor Manual Call Point - Double Pole - Running Man Graphic MarkingInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 27.73

1

KAC M1A-B470SF-K013-11 Blue Break Glass Call Point - 470 Ohm Surface - Resettable

KAC M1A-B470SF-K013-11 Blue Break Glass Call Point - 470 Ohm Surface - ResettableThe M1A-B470SF-K013-11 is a resettable Blue Break Glass Call Point.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP Indoor Call Point range. Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options. These options are easily utilised by simply connecting the terminal block to the required connection in the back of the MCP1 product. A variety of resistor versions are available with both 470W and 680W offered as standard. However other resistor types can be provided upon request.Key FeaturesColour BlueResettableUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityPlease note The image is for illustative purposes only.

GBP 17.18

1

KAC MCP1A-R-470-SR-R Red Manual Call Point - 470 Ohm Surface - Resettable

KAC MCP1A-R-470-SR-R Red Manual Call Point - 470 Ohm Surface - ResettableThe MCP1A-R-470-SR-R is a Red Resettable Manual Call Point.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options.Key FeaturesColour Red470OhmResettableUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 11.15

1

KAC M1A-R680SG-STCK-01 Red Break Glass Call Point - 680Ohm - Surface - House Flame

KAC M1A-R680SG-STCK-01 Red Break Glass Call Point - 680Ohm - Surface - House FlameThe M1A-R680SG-STCK-01 is a Red Break Glass Call Point.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options.Key FeaturesColour Red680OhmUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 13.44

1

KAC WCP2A-R-470 Red Waterproof Break Glass Call Point - IP67 - 470 Ohm with LED

KAC WCP2A-R-470 Red Waterproof Break Glass Call Point - IP67 - 470 Ohm with LEDInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new WCP Outdoor Call Point range.The outdoor WCP is an IP67 sealed manual call point product. The enhanced environmental protection allows the unit to be installed in many external environments where water and dirt are likely to be present making it a true waterproof and outdoor product.Installation time and ultimately cost are of paramount importance to any fire or security installer. The WCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new WCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the WCP. Simple but effective with no re-termination required and no time wasted. In addition all WCP products are supplied with three standard 20mm threaded cable entries accommodating all types of surface wiring installations.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP Outdoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.Full compliance with the latest standards is essential and the new WCP indoor call point range is fully approved to the latest EN54-11 standard. Compliant markings only.All WCP2 products are supplied with an LED indicator as standard.Key FeaturesSealed to IP67Unique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsCPD Approval

GBP 76.61

1

KAC M3A-R000SG-K013-81 Red Indoor Manual Call Point With House Flame Marking - Normally OpenNormally Close NONC- Surface - Break Glass

KAC M3A-R000SG-K013-81 Red Indoor Manual Call Point With House Flame Marking - Normally OpenNormally Close NONC- Surface - Break GlassInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocks.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 16.99

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)

KAC M2A-R680SG-K013-01 Red Surface Break Glass Indoor Call Point Flame 680 OHM

KAC M4A-W000SG-K013-12 White Double Pole Surface Glass Indoor Manual Call Point With Emergency Door Release Marking

KAC M4A-B000SF-K013-11 Blue Double Pole Surface Flexible Element Indoor Manual Call Point With Plain Marking

KAC W4A-R000SG-K013-01 Red Double Pole Surface Break Glass Outdoor Manual Call Point House Flame Marking

KAC M4A-G000SF-STCK-12 Green Double Pole Surface Flexible Element Indoor Manual Call Point With Emergency Door Release Marking

KAC W4A-G000SG-K013-11 Green Double Pole Surface Break Glass Outdoor Manual Call Point Plain Marking

KAC WCP1A-R-470 Red Waterproof Break Glass Call Point - IP67 - 470 Ohm

KAC WCP1A-R-470-IS Red Waterproof Intrinsically Safe Call Point - 470 Ohm

KAC WCP1A-R-470-R Red Waterproof Call Point - IP67 - 470 Ohm - Resettable

KAC M4A-B000SG-K013-11 Blue Double Pole Surface Glass Indoor Manual Call Point With A Double Pole With Plain Marking

KAC W1A-R470SG-STCK-01 Red Surface Break Glass Outdoor Manual Call Point House Flame Logo

KAC MCP4A-R-SR Red Break Glass Call Point - Double Pole - NONC Surface

KAC MCP4A-B-SB Blue Break Glass Call Point - Double Pole - NONC Surface

KAC MCP4A-W-SW White Break Glass Call Point - Double Pole - NONC Surface

KAC MCP1A-R-470-SR-IS Red Intrinsically Safe Call Point - Surface - 470Ohm

KAC MCP4A-G-SG Green Break Glass Call Point - Double Pole - NONC Surface

KAC M3A-Y000SF-K013-11 MCP3A Call Point - Yellow - NONC - Surface - fe1140-plain

KAC MCP1A-R-470 Red Break Glass Call Point - 470 Ohm Flush

KAC M2A-R470SG-K013-01 Red Break Glass Call Point with LED - 470 Ohm Surface

KAC M4A-G000SF-K013-13 Green Double Pole Surface Flexible Element Indoor Manual Call Point - Double Pole - Running Man Graphic Marking

KAC M1A-B470SF-K013-11 Blue Break Glass Call Point - 470 Ohm Surface - Resettable

KAC MCP1A-R-470-SR-R Red Manual Call Point - 470 Ohm Surface - Resettable

KAC M1A-R680SG-STCK-01 Red Break Glass Call Point - 680Ohm - Surface - House Flame

KAC WCP2A-R-470 Red Waterproof Break Glass Call Point - IP67 - 470 Ohm with LED

KAC M3A-R000SG-K013-81 Red Indoor Manual Call Point With House Flame Marking - Normally OpenNormally Close NONC- Surface - Break Glass

NORDIC AD PARTNER

Powered by Cobiro