blender smoothie to go from GBP 4 | See the cheapest prices and offers on css.nordicadpartner.dk

Kennedy 17mm Go Through Socket

Available in a range of metric sizes, these replacement Go-Thru Sockets are designed to suit ratchet combination spanner set (Quattro 4-in-1 - Q23M). An ideal way to expand your tool kit as well as replace any misplaced or damaged items. Features and Benefits Replacement parts are designed to keep your tool working to an optimum level A cost-effective way of expanding your pre-existing ratchet combination spanner Available in various sizes to suit your specific requirements Chrome vanadium steel construction makes for a highly durable and resilient product Polished chrome finish makes for an easier clean of your component and further protects against wear and tear Typical Applications Construction Engineering Automotive Notes To suit ratchet combination spanner set (Quattro 4-in-1 - Q23M)

GBP 6.19

1

Kennedy 17mm Insulated Open Jaw Wrench

Single End Open Jaw. Chrome vanadium single ended open jaw spanners. Fully insulated to conform to VDE 0680/201 and EN 60900:2012 standards for safe electrical applications up to 1000V. Spanner dimensions conform to DIN 7446.

GBP 40.99

1

Kennedy 17mm Insulated Ring Spanner

Insulated Single End Ring Spanners Chrome vanadium single ended open jaw spanners. Spanner dimensions conform to DIN 7446. Fully insulated to conform to VDE 0680/201 and EN 60900:2012 standards for safe electrical applications up to 1000V.

GBP 39.99

1

Kennedy 17mm Insulated Hexagon Socket 3/8" Double Triangle 1000V

This range of Kennedy 3/8 inch insulated hexagon sockets is built for safety, strength and reliability in high-voltage environments. Manufactured from durable chrome vanadium steel and protected with dual-layer insulation, each socket is individually tested to isolate against up to 1000 volts. Socket sizes range from 6mm to 22mm and conform to IEC 60900 safety standards. Features and Benefits Drive size 3/8 inch square drive ideal for precision electrical work Socket size range from 6mm to 22mm to suit a variety of tasks Socket type insulated single hexagon for secure and safe fastening Material chrome vanadium steel for high strength and wear resistance Finish dual-layer insulation for protection against electrical short circuits Size system metric with clearly marked sizing for quick identification Standards Conforms to IEC 60900 for certified safety in live working environments

GBP 14.29

1

Kennedy 17mm Deep Socket 1/2" Square Drive

Available to purchase in varying sizes, these bi-hexagonal sockets possess a 12 point side drive design to give a higher torque than normal sockets. Able to grip worn nuts and also will not round off existing nuts. All sockets have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. Features and Benefits Higher torque given due to the 12 point bi-hexagonal side drive Ball retaining groove on each face ensures a positive fit with varying accessories Require less turning to engage the next area of the socket for quick removal of fastening Manufactured from chrome vanadium steel for durability Typical Applications Automotive Construction DIY

GBP 6.99

1

Kennedy 10/13/14/17MM Insulated Center Cross Keydouble Triangle 1000 V

Manufactured from durable plastic, this insulated centre cross key from Kennedy ensures no electrical contact and keeps the user fully isolated against up to 1000 volts of electricity.Features and Benefits Sizing information printed on the body of the tool for easy identification Multi-layer insulated to isolate against up to 1000 volts of electricity Prevents the possibility of electrical contactStandards IEC 60900

GBP 54.99

1

Kennedy 17mm Spark Resistant O/End Slogging Wrench Al-Br

Open End Slogging Wrench With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.

GBP 35.99

1

Kennedy 17mm Spark Resistant R/End Slogging Wrench Al-Br

Ring End Slogging Wrench With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.

GBP 35.99

1

Kennedy 17mm x 70mm Hex Bit Socket 1/2" Square Drive

Suited for the insertion and removal of fasteners and fixings using 1/2" square drive tooling, this range of 1/2" drive screwdriver socket bits are ideal for a host of applications. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free, each product has an emphasis on longevity and high standards. All have ball retaining groove on each face of the square drive and are available with various socket sizes and bit types. Features and Benefits Available to purchase with varying socket sizes and bit types to ensure you find the right product to suit your needs Manufactured from chrome vanadium steel making for a robust product Each product is chrome plated to bolster resistance to corrosion, wear and tear and general punishment Ball retaining groove on each face of the square drive Typical Applications Ideal for use when inserting and removing fasteners and fixings in the following industries: Construction Automotive Engineering DIY Plumbing Electrical Standards Conforms to DIN standards

GBP 13.99

1

Kennedy 17mm Insulated Hexagon Socket 1/2" Sq/Dr

All products are quality tested and fully insulated to 1000V AC. Conforms to VDE 0680/201 ( except extension bars) and EN 60900:2012 standards. All 1/2" square drive. Insulated Reversible Ratchet Handle. 125 & 250mm Insulated Extension Bars. 200mm Insulated T-Handle. Insulated Single Hexagon Sockets.

GBP 16.99

1

Kennedy 17mm Open Ended Crowfoot Wrench 3/8" Square Drive

This range of 3/8in. square drive, metric sized chrome vanadium steel wrenches are designed to be used for getting into tight spots and hard to reach areas, in particular around tubing, hydraulic lines and pipes. Available in varying sizes, each wrench is designed for use with 3/8" square drive tools. Features and Benefits Ideal for use when trying to work in confined spaces such as around tubing or piping Manufactured from chrome vanadium steel for overall resilience Can be used with your pre-existing 3/8in. square drive tools for versatility of use Available in a variety of metric sizes to suit your requirements Typical Applications Plumbing Engineering Automotive Construction

GBP 7.49

1

Kennedy 17mm Socket 1/2" Square Drive

With a 1/2" square drive, these vanadium steel bi-hexagonal sockets are the ideal product for working on hard to reach fastenings or more stubborn fastenings due to their 12 point design. Possessing a higher torque than normal sockets, this range of sockets can also effectively grip worn nuts and won't round off existing nuts. Finished with a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Features and Benefits Side drive design gives a higher torque than regular sockets Ball retaining groove on each product ensures a positive fit with compatible accessories Manufactured from vanadium steel for durability Available in a variety of sizes to allow you to purchase the size that best suits your requirements Requires only a one-twelfth turn to engage the next point of the socket Typical Applications Ideal for use when tightening or loosening hexagonal shaped fastenings in a variety of industries including: Automotive Construction Agricultural Plumbing

GBP 4.99

1

Kennedy 17mm Single Hex Socket 1/2" Square Drive

These single-hexagon sockets possess six points which offer a more positive location, particularly on worn or rounded nuts and require a one-sixth turn to engage the next point of the socket. Available in a variety of metric sizes and manufactured from chrome vanadium steel. Features and Benefits Manufactured from a resilient chrome vanadium steel Available in a variety of metric sizes to suit your application Polished finish repels grime and dirt for an easy clean 6 point sockets require only one-sixth of a turn to engage the next point Typical Applications

GBP 5.19

1

Kennedy 17mm Spark Resistant Single Open End Spanner Al-Br

Single Open End Spanners Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.

GBP 25.99

1

Kennedy 17mm Spark Resistant Combination Spanner Be-Cu

Combination Spanners Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Beryllium Copper are manufactured to 30-10HRC and offer a breaking strain of 1117 N/m - 1236 N/m. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

GBP 49.99

1

Kennedy 17mm Spark Resistant Combination Spanner Al-Br

Combination Spanners Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.

GBP 69.99

1

Kennedy 17mm Deep Ken-Grip Socket 3/8" Square Drive

These 3/8in. Square Drive deep sockets have a Ken-Grip patented design that has the ability to grip even worn and rounded nuts. The product is designed to minimise damage on worn or rusted fasteners and can be used on a range of fasteners, including non-metric hexagons and E-Torx Drive sizes. The double knurl feature gives a high grip which is essential for quick tool change when hands are greasy or oily. Manufactured from chrome vanadium steel, the sockets and accessories are aluminium free and fully chrome plated for an easy clean finish. Features and Benefits Ken-Grip are capable of gripping fasteners which are up to 95% rounded off Will not damage worn or rusted fasteners Fits a wide range of non-metric Hexagons and E-Torx Drive Sizes for a wide scope of use Fully chrome plated for an easy clean with an aluminium free finish for non-sparking applications Unique 'Double-Knurl' design ensures high grip Available in a variety of metric sizes to suit your requirements Typical Applications Automotive Engineering Plumbing DIY Standards DIN 3124

GBP 10.29

1

Kennedy 17mm Spark Resistant Socket 1/2" Square DR Al-Br

Sockets 12 point bi-hexagon. Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.

GBP 45.99

1

Kennedy 17mm Socket 3/8" Square Drive

Available in metric sizes, these 3/8" square drive, bi-hexagonal sockets are ideal for applications in which high torque is required. With a 12 point system and side drive design, each socket gives a higher torque than normal sockets, can grip worn nuts and will not round off existing nuts. Every socket possesses a ball-retaining groove on each face of the square drive and requires only a one-twelfth turn to engage the next point of the socket. Constructed from chrome vanadium steel with a highly polished, chrome plated, mirror finish. Features and Benefits Ball retaining groove on each face of the drive ensures a positive fit with accessories 12 point design requires only a twelfth of a turn to engage with the next point of the socket for easy fastening and loosening Will grip even worn nuts and won't round off existing nuts Side drive design gives a higher torque than standards sockets Available in a range of metric sizes to suit your requirements Chrome vanadium steel construction is robust and bolsters product longevity Mirror finish repels grime and dirt and makes each socket easier to clean Typical Applications Construction Engineering Assembly and Repair Automotive DIY

GBP 3.59

1

Kennedy 17mm Single Hex Socket 3/8" Square Drive

This range of metric sized, 3/8in. square drive, Single-Hexagon Sockets are ideal for general use. The 6 point design of the product offers a more positive location, particularly on worn or rounded nuts, but requires a one-sixth turn to engage the next point of the socket. Manufactured from chrome vanadium steel and chrome plated with a mirror finish, the product is available in a range of sizes. Features and Benefits Available in a range of metric sizes to suit your needs Manufactured from chrome vanadium steel making for a robust product Chrome plating further protects the product against corrosion as well as wear and tear The single hexagon design offers a more positive location for use on worn fasteners Requires only one sixth turn to engage the next point of the socket for ease of turning Typical Applications Construction Automotive Engineering

GBP 5.39

1

Kennedy 17mm Deep Socket 3/8" Square Drive

Available in a range of metric sizes, these 3/8" square drive, bi-hexagon deep sockets offer superior torque with minimal user exertion. Manufactured from chrome vanadium steel and complete with a chrome-plated, polished mirror finish. With a 12 point side and side drive, the deep socket gives a higher torque than normal sockets, grips worn nuts and will not round off existing nuts. Each socket possesses a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Requires only a one-twelfth turn to engage the next point of the socket. Features and Benefits Manufactured from durable chrome vanadium steel for longevity Polished mirror finish repels dirt and grime Require only one-twelfth of a turn to engage the next part of the socket for quick fastening and loosening of nuts Ball retaining groove ensures a positive fit with accessories and reduces slippage 12 point and side drive allows you to deliver more torque than a standard socket Typical Applications Engineering Plumbing DIY Automotive

GBP 5.99

1

Kennedy 17mm Ken-Grip Socket 1/2" Square Drive

The Ken-Grip socket offers a new standard of performance with the ability to grip up to 95% of a rounded fastener. It has a unique patented design that grips even worn and rusted fasteners without damaging them and can be used on a wide range of fasteners, including non-metric hexagons and E-Torx Drive sizes. The double knurl feature gives a high grip which is essential for quick tool change when hands are greasy or oily. Manufactured from chrome vanadium steel, the sockets and accessories are aluminium free and fully chrome plated for an easy clean finish. All products have a 1/2in. square drive and are supplied in metric sizes. Features and Benefits Ken-Grip designed tool grips fasteners which are up to 95% rounded off Will not damage worn or rusted fasteners Fits a wide range of non-metric Hexagons and E-Torx Drive Sizes Fully chrome plated for easy clean with aluminium free finish Unique 'Double-Knurl' for high grip Typical Applications Engineering Construction Automotive Standards DIN3124

GBP 4.09

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Size

Merchant

Price (EUR)