base camp duffel m from GBP 9 | See the cheapest prices and offers on css.nordicadpartner.dk

Kentec Sigma CP-A AlarmSense Conventional 2-Wire Fire Panel 2 - 8 Zone

Kentec Sigma CP-A AlarmSense Conventional 2-Wire Fire PanelThe Sigma CP-A AlarmSense range consists of a series of conventional two four and eight zone fire alarm control panels. The AlarmSense system enables all detection and sounder devices in a given zone to be wired to the same pair of cables greatly reducing the cabling and installation requirements and hence costs.The AlarmSense range of devices includes smoke and heat detectors call points base sounders base sounderbeacons and relay units all wired to the same pair of cables. Having sounders and sounder beacons installed on the same cabling as detectors and call points allows all systems to be configured for common zonal or two-stage alarms by simply setting one of the panels configuration options.Selection of the AlarmSense local alarm feature at sounder or sounder beacon bases invokes the alarm verification feature. This is particularly useful in Houses of Multiple Occupation such as student accommodation or nursing homes. When sounder or sounder beacon bases are selected for local alarm mode alarms are restricted such that only the sounder connected to the activated detector will operate initially.The panel will attempt to reset the activated detector after a time delay and if successful no further alarms are sounded. If the detector re-activates after being reset a general alarm will sound throughout the premises. The alarm verification feature of the Sigma CP-A control panel greatly reduces the risk of unwanted alarms or call outs while still providing secure high quality fire protection throughout the premises.Key Features2 wire systems reduces installation cabling2-wire repeaters and ancillary boards via serial busFully programmable using simple menu optionsAdjustable sounder delay timeSounder configuration optionsZonal sounder delay for detectors onlyZonal sounder delay for call points onlyCoincidence output via ancillary boardShort circuit fire selectable by zoneNon latching selection by zoneSilent zones common sounder outputsZone input delay for sprinkler system connectionAlarmSense local alarm feature supportedSimple single board constructionInstaller friendlyCompatible with all AlarmSense devicesTwo conventional monitored sounder outputs3 Amp power supplyAuxiliary power outputFully certified to BS EN54-2 and BS EN54-4Allows systems to be installed in accordance with BS5839 Part 6Variants AvailablePart NumberDescriptionKA11020M2Sigma CPA Alarmsense Conventional Panel 2 Zones SurfaceKA11040M2Sigma CPA Alarmsense Conventional Panel 4 Zones SurfaceKA11080M2Sigma CPA Alarmsense Conventional Panel 8 Zones Surface

GBP 305.12

1

Kentec KA11080M2 Sigma CP-A Alarmsense Conventional Panel 8 Zones

Kentec KA11080M2 Sigma CP-A Alarmsense Conventional Panel 8 ZonesThe Sigma CP-A AlarmSense range consists of a series of conventional two four and eight zone fire alarm control panels. The AlarmSense system enables all detection and sounder devices in a given zone to be wired to the same pair of cables greatly reducing the cabling and installation requirements and hence costs.The AlarmSense range of devices includes smoke and heat detectors call points base sounders base sounderbeacons and relay units all wired to the same pair of cables. Having sounders and sounder beacons installed on the same cabling as detectors and call points allows all systems to be configured for common zonal or two-stage alarms by simply setting one of the panels configuration options.Selection of the AlarmSense local alarm feature at sounder or sounder beacon bases invokes the alarm verification feature. This is particularly useful in Houses of Multiple Occupation such as student accommodation or nursing homes. When sounder or sounder beacon bases are selected for local alarm mode alarms are restricted such that only the sounder connected to the activated detector will operate initially.The panel will attempt to reset the activated detector after a time delay and if successful no further alarms are sounded. If the detector re-activates after being reset a general alarm will sound throughout the premises. The alarm verification feature of the Sigma CP-A control panel greatly reduces the risk of unwanted alarms or call outs while still providing secure high quality fire protection throughout the premises.Key Features 2 wire systems reduces installation cabling 2-wire repeaters and ancillary boards via serial bus Fully programmable using simple menu options Adjustable sounder delay time Sounder configuration options Zonal sounder delay for detectors only Zonal sounder delay for call points only Coincidence output via ancillary board Short circuit fire selectable by zone Non latching selection by zone Silent zones common sounder outputs Zone input delay for sprinkler system connection AlarmSense local alarm feature supported Simple single board construction Installer friendly Compatible with all AlarmSense devices Two conventional monitored sounder outputs 3 Amp power supply Auxiliary power output Fully certified to BS EN54-2 and BS EN54-4 Allows systems to be installed in accordance with BS5839 Part 6

GBP 386.92

1

Kentec KA11040M2 Sigma CP-A Alarmsense Conventional Panel 4 Zones

Kentec KA11040M2 Sigma CP-A Alarmsense Conventional Panel 4 Zones The Sigma CP-A AlarmSense range consists of a series of conventional two four and eight zone fire alarm control panels. The AlarmSense system enables all detection and sounder devices in a given zone to be wired to the same pair of cables greatly reducing the cabling and installation requirements and hence costs.The AlarmSense range of devices includes smoke and heat detectors call points base sounders base sounderbeacons and relay units all wired to the same pair of cables. Having sounders and sounder beacons installed on the same cabling as detectors and call points allows all systems to be configured for common zonal or two-stage alarms by simply setting one of the panels configuration options.Selection of the AlarmSense local alarm feature at sounder or sounder beacon bases invokes the alarm verification feature. This is particularly useful in Houses of Multiple Occupation such as student accommodation or nursing homes. When sounder or sounder beacon bases are selected for local alarm mode alarms are restricted such that only the sounder connected to the activated detector will operate initially.The panel will attempt to reset the activated detector after a time delay and if successful no further alarms are sounded. If the detector re-activates after being reset a general alarm will sound throughout the premises. The alarm verification feature of the Sigma CP-A control panel greatly reduces the risk of unwanted alarms or call outs while still providing secure high quality fire protection throughout the premises.Key Features 2 wire systems reduces installation cabling 2-wire repeaters and ancillary boards via serial bus Fully programmable using simple menu options Adjustable sounder delay time Sounder configuration options Zonal sounder delay for detectors only Zonal sounder delay for call points only Coincidence output via ancillary board Short circuit fire selectable by zone Non latching selection by zone Silent zones common sounder outputs Zone input delay for sprinkler system connection AlarmSense local alarm feature supported Simple single board construction Installer friendly Compatible with all AlarmSense devices Two conventional monitored sounder outputs 3 Amp power supply Auxiliary power output Fully certified to BS EN54-2 and BS EN54-4 Allows systems to be installed in accordance with BS5839 Part 6

GBP 335.34

1

Kentec Line Continuity Monitoring Unit K14060

Kentec LCMU Line Continuity Monitoring Unit K14060To use this method of monitoring the breaking connection of the detector base must be fitted with a diode. To ensure correct operation over a wide supply voltage range and with up to 20 detectors removed a Schottky type BYV-1060 is recommended. These devices are however very sensitive to electrostatic discharge and extra care should be taken when handling or cable testing. It is also necessary to fit a 47uF capacitor to the detection line terminals on some of the control panels not K3000 series or Sigma CP.Extreme care should be taken when fitting the capacitor in the panel as they are polarity conscious. The LCMU itself is also polarity conscious and the polarity is indicated in the normal manner i.e. black wire is always negative. A wrongly connected LCMU will produce a short circuit fault condition. Due to the use of surface mount technology components the LCMU is probably the smallest device of its kind on the market. This enables the device to be fitted either within the last device on a zone or in the back box eliminating the need for an additional wiring point.Key FeaturesEasy to installNo additional wiring pointLow costSub-miniature designEnvironmentally sealed

GBP 8.56

1

Kentec K2540003 Power Supply Boxed 5.25 Amp PSU Max 12 AH Battery Surface

Kentec K2540003 Power Supply Boxed To match Syncro Styling 5.25 Amp PSU Max 12 AH Battery SurfaceSyncro Power fully certified to EN54-4 power supplies provide a stable and fully regulated true 24V output for fire alarm system applications under all power conditions.The unique regulation techniques ensure that even when running on standby batteries a stable 24V supply is available to all parts of the system ensuring that all 24V powered devices connected are supplied with optimum power.The powerful onboard microcontroller ensures that all battery types are conditioned with optimum temperature compensated charging algorithms to maximise battery life and maintain batteries in top condition.Syncro Power EN54-4 compliant power supplies can be fitted with an optional dual fused output monitoring module to ensure compliance with European standards when supplying fire control panels with an external power supply.Enclosed units are available to match both Sigma and Syncro equipment ranges and all are finished with matching livery and provide power on and power fault indications. Optional dual output path KD variant available to provide two independent supply paths between the power supply unit and the control panel in accordance with EN54-4 clause 6.4 and BS5839 pt1 clause 12.2.2.m requirements.Key Features2.5A and 5.25A versionsChassis only or enclosure mounted with battery space110V or 230V inputRegulated true 24V outputIntelligent battery charging and temperature compensationHouse up to 26Ah batteriesStatus indicators for monitored faultsDual output option for powering fire alarm control panels remotelyChassis versions have same mounting points

GBP 454.88

1

Kentec K2540015 Power Supply Boxed 5.25 Amp PSU Max 26 AH Battery Surface

Kentec K2540015 Power Supply Boxed To match Syncro Styling 5.25 Amp PSU Max 26 AH Battery SurfaceSyncro Power fully certified to EN54-4 power supplies provide a stable and fully regulated true 24V output for fire alarm system applications under all power conditions.The unique regulation techniques ensure that even when running on standby batteries a stable 24V supply is available to all parts of the system ensuring that all 24V powered devices connected are supplied with optimum power.The powerful onboard microcontroller ensures that all battery types are conditioned with optimum temperature compensated charging algorithms to maximise battery life and maintain batteries in top condition.Syncro Power EN54-4 compliant power supplies can be fitted with an optional dual fused output monitoring module to ensure compliance with European standards when supplying fire control panels with an external power supply.Enclosed units are available to match both Sigma and Syncro equipment ranges and all are finished with matching livery and provide power on and power fault indications. Optional dual output path KD variant available to provide two independent supply paths between the power supply unit and the control panel in accordance with EN54-4 clause 6.4 and BS5839 pt1 clause 12.2.2.m requirements.Key Features2.5A and 5.25A versionsChassis only or enclosure mounted with battery space110V or 230V inputRegulated true 24V outputIntelligent battery charging and temperature compensationHouse up to 26Ah batteriesStatus indicators for monitored faultsDual output option for powering fire alarm control panels remotelyChassis versions have same mounting points

GBP 479.48

1

Kentec K2525003 Power Supply Boxed 2.5 Amp PSU Max 12 AH Battery Surface

Kentec K2525003 Power Supply Boxed To match Syncro Styling 2.5 Amp PSU Max 12 AH Battery SurfaceSyncro Power fully certified to EN54-4 power supplies provide a stable and fully regulated true 24V output for fire alarm system applications under all power conditions.The unique regulation techniques ensure that even when running on standby batteries a stable 24V supply is available to all parts of the system ensuring that all 24V powered devices connected are supplied with optimum power.The powerful onboard microcontroller ensures that all battery types are conditioned with optimum temperature compensated charging algorithms to maximise battery life and maintain batteries in top condition.Syncro Power EN54-4 compliant power supplies can be fitted with an optional dual fused output monitoring module to ensure compliance with European standards when supplying fire control panels with an external power supply.Enclosed units are available to match both Sigma and Syncro equipment ranges and all are finished with matching livery and provide power on and power fault indications. Optional dual output path KD variant available to provide two independent supply paths between the power supply unit and the control panel in accordance with EN54-4 clause 6.4 and BS5839 pt1 clause 12.2.2.m requirements.Key Features2.5A and 5.25A versionsChassis only or enclosure mounted with battery space110V or 230V inputRegulated true 24V outputIntelligent battery charging and temperature compensationHouse up to 26Ah batteriesStatus indicators for monitored faultsDual output option for powering fire alarm control panels remotelyChassis versions have same mounting points

GBP 437.34

1

Kentec KD2540015 Dual Power Output Supply Boxed 5.25 Amp PSU Max 26 AH Battery Surface

Kentec KD2540015 Dual Power Output Supply Boxed 5.25 Amp PSU Max 26 AH Battery SurfaceDual Power Output Supply Boxed To match Syncro Styling 5.25 Amp PSU Max 26 AH Battery SurfaceSyncro Power fully certified to EN54-4 power supplies provide a stable and fully regulated true 24V output for fire alarm system applications under all power conditions.The unique regulation techniques ensure that even when running on standby batteries a stable 24V supply is available to all parts of the system ensuring that all 24V powered devices connected are supplied with optimum power.The powerful onboard microcontroller ensures that all battery types are conditioned with optimum temperature compensated charging algorythms to maximise battery life and maintain batteries in top condition.Syncro Power EN54-4 compliant power supplies can be fitted with an optional dual fused output monitoring module to ensure compliance with European standards when supplying fire control panels with an external power supply. Enclosed units are available to match both Sigma and Syncro equipment ranges and all are finished with matching livery and provide power on and power fault indications.Optional dual output path KD variant available to provide two independent supply paths between the power supply unit and the control panel in accordance with EN54-4 clause 6.4 and BS5839 pt1 clause 12.2.2.m requirements.Key Features2.5A and 5.25A versionsChassis only or enclosure mounted with battery space110V or 230V inputRegulated true 24V outputIntelligent battery charging and temperature compensationHouse up to 26Ah batteriesStatus indicators for monitored faultsDual output option for powering fire alarm control panels remotelyChassis versions have same mounting points

GBP 540.95

1

Kentec K25400M3 Power Supply Boxed 5.25A PSU Max 17.2 AH Battery Surface

Kentec K25400M3 Power Supply Boxed 5.25A PSU Max 17.2 AH Battery SurfacePower Supply Boxed To match Sigma CPXT Styling 5.25A PSU Max 17.2 AH Battery SurfaceSyncro Power fully certified to EN54-4 power supplies provide a stable and fully regulated true 24V output for fire alarm system applications under all power conditions.The unique regulation techniques ensure that even when running on standby batteries a stable 24V supply is available to all parts of the system ensuring that all 24V powered devices connected are supplied with optimum power.The powerful onboard microcontroller ensures that all battery types are conditioned with optimum temperature compensated charging algorithms to maximise battery life and maintain batteries in top condition.Syncro Power EN54-4 compliant power supplies can be fitted with an optional dual fused output monitoring module to ensure compliance with European standards when supplying fire control panels with an external power supply.Enclosed units are available to match both Sigma and Syncro equipment ranges and all are finished with matching livery and provide power on and power fault indications. Optional dual output path KD variant available to provide two independent supply paths between the power supply unit and the control panel in accordance with EN54-4 clause 6.4 and BS5839 pt1 clause 12.2.2.m requirements.Key Features2.5A and 5.25A versionsChassis only or enclosure mounted with battery space110V or 230V inputRegulated true 24V outputIntelligent battery charging and temperature compensationHouse up to 26Ah batteriesStatus indicators for monitored faultsDual output option for powering fire alarm control panels remotelyChassis versions have same mounting points

GBP 479.48

1

Kentec KD2540003 Dual Power Output Supply Boxed 5.25 Amp PSU Max 17 AH Battery Surface

Kentec KD2540003 Dual Power Output Supply Boxed 5.25 Amp PSU Max 17 AH Battery SurfaceDual Power Output Supply Boxed To match Syncro Styling 5.25 Amp PSU Max 17 AH Battery SurfaceSyncro Power fully certified to EN54-4 power supplies provide a stable and fully regulated true 24V output for fire alarm system applications under all power conditions.The unique regulation techniques ensure that even when running on standby batteries a stable 24V supply is available to all parts of the system ensuring that all 24V powered devices connected are supplied with optimum power.The powerful onboard microcontroller ensures that all battery types are conditioned with optimum temperature compensated charging algorythms to maximise battery life and maintain batteries in top condition.Syncro Power EN54-4 compliant power supplies can be fitted with an optional dual fused output monitoring module to ensure compliance with European standards when supplying fire control panels with an external power supply. Enclosed units are available to match both Sigma and Syncro equipment ranges and all are finished with matching livery and provide power on and power fault indications.Optional dual output path KD variant available to provide two independent supply paths between the power supply unit and the control panel in accordance with EN54-4 clause 6.4 and BS5839 pt1 clause 12.2.2.m requirements.Key Features2.5A and 5.25A versionsChassis only or enclosure mounted with battery space110V or 230V inputRegulated true 24V outputIntelligent battery charging and temperature compensationHouse up to 26Ah batteriesStatus indicators for monitored faultsDual output option for powering fire alarm control panels remotelyChassis versions have same mounting points

GBP 516.36

1

Kentec KD2525003 Dual Power Output Supply Boxed 2.5 Amp PSU Max 12 AH Battery Surface

Kentec KD2525003 Dual Power Output Supply Boxed 2.5 Amp PSU Max 12 AH Battery SurfaceDual Power Output Supply Boxed To match Syncro Styling 2.5 Amp PSU Max 12 AH Battery SurfaceSyncro Power fully certified to EN54-4 power supplies provide a stable and fully regulated true 24V output for fire alarm system applications under all power conditions.The unique regulation techniques ensure that even when running on standby batteries a stable 24V supply is available to all parts of the system ensuring that all 24V powered devices connected are supplied with optimum power.The powerful onboard microcontroller ensures that all battery types are conditioned with optimum temperature compensated charging algorythms to maximise battery life and maintain batteries in top condition.Syncro Power EN54-4 compliant power supplies can be fitted with an optional dual fused output monitoring module to ensure compliance with European standards when supplying fire control panels with an external power supply. Enclosed units are available to match both Sigma and Syncro equipment ranges and all are finished with matching livery and provide power on and power fault indications.Optional dual output path KD variant available to provide two independent supply paths between the power supply unit and the control panel in accordance with EN54-4 clause 6.4 and BS5839 pt1 clause 12.2.2.m requirements.Key Features2.5A and 5.25A versionsChassis only or enclosure mounted with battery space110V or 230V inputRegulated true 24V outputIntelligent battery charging and temperature compensationHouse up to 26Ah batteriesStatus indicators for monitored faultsDual output option for powering fire alarm control panels remotelyChassis versions have same mounting points

GBP 488.30

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)