Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Vi er 100% dedikerede til Google Annoncering – Vi har mange års erfaring med Google Ads og den bruger vi på at opsætte, optimere & vedligeholde vores fantastiske kunders konti.

100% Specialiseret i Google Ads
Vi har mange års erfaring fra +300 konti
Ingen lange bindinger & evighedskontrakter
Jævnlig opfølgning med hver enkelt kunde
Vi tager din virksomhed seriøst
KONTAKT OS
LÆS UDTALELSER & SUCCESHISTORIER

61 results (0,14196 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

10x Mitsubishi VNMG 160412-MP Insert Grade MC6025

10x Mitsubishi VNMG 160412-MP Insert Grade MC6025

VNMG Turning Inserts 35 Rhombic Insert MC6025 - ISO P15 - P25 2-in-1 technology provides excellent heat and wear resistancewhich helps prevent crater wear. The smooth coating layer combined with microscopic TiCN coating ensures better surface finish and long, consistent tool life. Suitable for high speed and high efficiency machining. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 * General

GBP 179.90
1

10x Mitsubishi VNMG 160408-LP Insert Grade MP3025

10x Mitsubishi VNMG 160408-LP Insert Grade MP3025

VNMG Turning Inserts 35 Rhombic Insert MP3025 - ISO P20 - P30 Coated cermet grade with improved wear resistance and significantly increased fracture resistance. For use with or without coolant and on interrupted cuts when finish machining steels, stainless steels and cast irons. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 * General

GBP 173.90
1

10x Mitsubishi VNMG 160408-FH Insert Grade MP3025

10x Mitsubishi VNMG 160408-FH Insert Grade MP3025

VNMG Turning Inserts 35 Rhombic Insert MP3025 - ISO P20 - P30 Coated cermet grade with improved wear resistance and significantly increased fracture resistance. For use with or without coolant and on interrupted cuts when finish machining steels, stainless steels and cast irons. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 * General

GBP 173.90
1

10x Mitsubishi VNMG 160408-LM Insert Grade MP7035

10x Mitsubishi VNMG 160408-LM Insert Grade MP7035

VNMG Turning Inserts 35 Rhombic Insert MP7035 - ISO M30 - M40 PVD coated carbide substrate engineered for tough stainless steel applications. Thin PVD coating preserves edge sharpness and reduces tensile stresses when machining Stainless steel and Heat Resistant alloy machining under difficult conditions. Dependable tool life reduces machine down time. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 * General

GBP 179.90
1

10x Mitsubishi VNMG 160408-MP Insert Grade MP3025

10x Mitsubishi VNMG 160408-MP Insert Grade MP3025

VNMG Turning Inserts 35 Rhombic Insert MP3025 - ISO P20 - P30 Coated cermet grade with improved wear resistance and significantly increased fracture resistance. For use with or without coolant and on interrupted cuts when finish machining steels, stainless steels and cast irons. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 * General

GBP 173.90
1

10x Mitsubishi VNMG 160404-MP Insert Grade MP3025

10x Mitsubishi VNMG 160404-MP Insert Grade MP3025

VNMG Turning Inserts 35 Rhombic Insert MP3025 - ISO P20 - P30 Coated cermet grade with improved wear resistance and significantly increased fracture resistance. For use with or without coolant and on interrupted cuts when finish machining steels, stainless steels and cast irons. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 * General

GBP 173.90
1

10x Mitsubishi VNMG 160408-MP Insert Grade MC6025

10x Mitsubishi VNMG 160408-MP Insert Grade MC6025

VNMG Turning Inserts 35 Rhombic Insert MC6025 - ISO P15 - P25 2-in-1 technology provides excellent heat and wear resistancewhich helps prevent crater wear. The smooth coating layer combined with microscopic TiCN coating ensures better surface finish and long, consistent tool life. Suitable for high speed and high efficiency machining. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 * General

GBP 179.90
1

10x Mitsubishi VNMG 160408-MM Insert Grade MP7035

10x Mitsubishi VNMG 160408-MM Insert Grade MP7035

VNMG Turning Inserts 35 Rhombic Insert MP7035 - ISO M30 - M40 PVD coated carbide substrate engineered for tough stainless steel applications. Thin PVD coating preserves edge sharpness and reduces tensile stresses when machining Stainless steel and Heat Resistant alloy machining under difficult conditions. Dependable tool life reduces machine down time. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 * General

GBP 179.90
1

10x Mitsubishi VNMG 160408-MS Insert Grade VP10RT

10x Mitsubishi VNMG 160408-MS Insert Grade VP10RT

VNMG Turning Inserts 35 Rhombic Insert VP10RT (ISO P10 - P20, M10 - M20, K10 - K20, S10 - S20) Provides an excellent balance of wear and fracture resistance when turning difficult-to-cut materials. "MIRACLE" coating (Al, Ti, N) and a high-strength micro-grain cemented carbide substrate gives highly increased heat resistance and adhesion strength and a high-strength micro-grain cemented carbide substrate. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 * General

GBP 173.90
1

10x Mitsubishi VNMG 160408-LM Insert Grade MC7015

10x Mitsubishi VNMG 160408-LM Insert Grade MC7015

VNMG Turning Inserts 35 Rhombic Insert MC7015 - ISO M05 - M15 CVD coated grade for high efficiency turning of austenitic stainless steels. Excellent wear resistance in high speed cutting conditions. TiCN and micro grain Al2O3 coating delivers balanced wear and chipping resistance. Specially engineered carbide substrate provides excellent resistance to plastic deformation. Specifically designed for 300 series stainless steel applications. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 * General

GBP 179.90
1

Mitsubishi PR-WNMG080408-MA MC7025 3 0-Pce

Mitsubishi PR-WNMG080408-MA MC7025 3 0-Pce

WNMG Turning Inserts 80 Trigon Insert MC7025 - ISO M20 - M30 CVD coated grade for high efficiency turning of austenitic stainless steels. Excellent wear resistance in high speed cutting conditions. TiCN and micro grain Al2O3 coating delivers balanced wear and chipping resistance. Specially engineered carbide substrate provides excellent resistance to plastic deformation. Specifically designed for 300 series stainless steel applications. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 89.99
1

10x Mitsubishi WNMG 080408-GM Insert Grade MC7015

10x Mitsubishi WNMG 080408-GM Insert Grade MC7015

WNMG Turning Inserts 80 Trigon Insert MC7015 - ISO M05 - M15 CVD coated grade for high efficiency turning of austenitic stainless steels. Excellent wear resistance in high speed cutting conditions. TiCN and micro grain Al2O3 coating delivers balanced wear and chipping resistance. Specially engineered carbide substrate provides excellent resistance to plastic deformation. Specifically designed for 300 series stainless steel applications. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 93.90
1

10x Mitsubishi WNMG 080408-GM Insert Grade MP7035

10x Mitsubishi WNMG 080408-GM Insert Grade MP7035

WNMG Turning Inserts 80 Trigon Insert MP7035 - ISO M30 - M40 PVD coated carbide substrate engineered for tough stainless steel applications. Thin PVD coating preserves edge sharpness and reduces tensile stresses when machining Stainless steel and Heat Resistant alloy machining under difficult conditions. Dependable tool life reduces machine down time. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 109.90
1

10x Mitsubishi WNMG 080408-MW Insert Grade MC6025

10x Mitsubishi WNMG 080408-MW Insert Grade MC6025

WNMG Turning Inserts 80 Trigon Insert MC6025 - ISO P15 - P25 2-in-1 technology provides excellent heat and wear resistancewhich helps prevent crater wear. The smooth coating layer combined with microscopic TiCN coating ensures better surface finish and long, consistent tool life. Suitable for high speed and high ffficiency machining. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 89.90
1

Mitsubishi WNMG 080404-LM Insert Grade MC7015

Mitsubishi WNMG 080404-LM Insert Grade MC7015

WNMG Turning Inserts 80 Trigon Insert MC7015 - ISO M05 - M15 CVD coated grade for high efficiency turning of austenitic stainless steels. Excellent wear resistance in high speed cutting conditions. TiCN and micro grain Al2O3 coating delivers balanced wear and chipping resistance. Specially engineered carbide substrate provides excellent resistance to plastic deformation. Specifically designed for 300 series stainless steel applications. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 8.99
1

10x Mitsubishi WNMG 080404-GM Insert Grade MP7035

10x Mitsubishi WNMG 080404-GM Insert Grade MP7035

WNMG Turning Inserts 80 Trigon Insert MP7035 - ISO M30 - M40 PVD coated carbide substrate engineered for tough stainless steel applications. Thin PVD coating preserves edge sharpness and reduces tensile stresses when machining Stainless steel and Heat Resistant alloy machining under difficult conditions. Dependable tool life reduces machine down time. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 109.90
1

10x Mitsubishi WNMG 060412-MM Insert Grade MC7015

10x Mitsubishi WNMG 060412-MM Insert Grade MC7015

WNMG Turning Inserts 80 Trigon Insert MC7015 - ISO M05 - M15 CVD coated grade for high efficiency turning of austenitic stainless steels. Excellent wear resistance in high speed cutting conditions. TiCN and micro grain Al2O3 coating delivers balanced wear and chipping resistance. Specially engineered carbide substrate provides excellent resistance to plastic deformation. Specifically designed for 300 series stainless steel applications. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 71.90
1

10x Mitsubishi WNMG 060408-GM Insert Grade MP7035

10x Mitsubishi WNMG 060408-GM Insert Grade MP7035

WNMG Turning Inserts 80 Trigon Insert MP7035 - ISO M30 - M40 PVD coated carbide substrate engineered for tough stainless steel applications. Thin PVD coating preserves edge sharpness and reduces tensile stresses when machining Stainless steel and Heat Resistant alloy machining under difficult conditions. Dependable tool life reduces machine down time. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 89.90
1

10x Mitsubishi WNMG 080404-MA Insert Grade MP7035

10x Mitsubishi WNMG 080404-MA Insert Grade MP7035

WNMG Turning Inserts 80 Trigon Insert MP7035 - ISO M30 - M40 PVD coated carbide substrate engineered for tough stainless steel applications. Thin PVD coating preserves edge sharpness and reduces tensile stresses when machining Stainless steel and Heat Resistant alloy machining under difficult conditions. Dependable tool life reduces machine down time. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 109.90
1

10x Mitsubishi WNMG 080412-MA Insert Grade MP7035

10x Mitsubishi WNMG 080412-MA Insert Grade MP7035

WNMG Turning Inserts 80 Trigon Insert MP7035 - ISO M30 - M40 PVD coated carbide substrate engineered for tough stainless steel applications. Thin PVD coating preserves edge sharpness and reduces tensile stresses when machining Stainless steel and Heat Resistant alloy machining under difficult conditions. Dependable tool life reduces machine down time. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 109.90
1

10x Mitsubishi SNMG 120404-MA Insert Grade MC6025

10x Mitsubishi SNMG 120404-MA Insert Grade MC6025

SNMG Turning Inserts Square Insert MC6025 - ISO P15 - P25 2-in-1 technology provides excellent heat and wear resistancewhich helps prevent crater wear. The smooth coating layer combined with microscopic TiCN coating ensures better surface finish and long, consistent tool life. Suitable for high speed and high ffficiency machining. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 99.90
1

10x Mitsubishi WNMG 080412-MA Insert Grade MC7025

10x Mitsubishi WNMG 080412-MA Insert Grade MC7025

WNMG Turning Inserts 80 Trigon Insert MC7025 - ISO M20 - M30 CVD coated grade for high efficiency turning of austenitic stainless steels. Excellent wear resistance in high speed cutting conditions. TiCN and micro grain Al2O3 coating delivers balanced wear and chipping resistance. Specially engineered carbide substrate provides excellent resistance to plastic deformation. Specifically designed for 300 series stainless steel applications. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 109.90
1

10x Mitsubishi WNMG 060408-RM Insert Grade MC7025

10x Mitsubishi WNMG 060408-RM Insert Grade MC7025

WNMG Turning Inserts 80 Trigon Insert MC7025 - ISO M20 - M30 CVD coated grade for high efficiency turning of austenitic stainless steels. Excellent wear resistance in high speed cutting conditions. TiCN and micro grain Al2O3 coating delivers balanced wear and chipping resistance. Specially engineered carbide substrate provides excellent resistance to plastic deformation. Specifically designed for 300 series stainless steel applications. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 84.90
1

10x Mitsubishi WNMG 080412-RM Insert Grade MC7025

10x Mitsubishi WNMG 080412-RM Insert Grade MC7025

WNMG Turning Inserts 80 Trigon Insert MC7025 - ISO M20 - M30 CVD coated grade for high efficiency turning of austenitic stainless steels. Excellent wear resistance in high speed cutting conditions. TiCN and micro grain Al2O3 coating delivers balanced wear and chipping resistance. Specially engineered carbide substrate provides excellent resistance to plastic deformation. Specifically designed for 300 series stainless steel applications. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 109.90
1

10x Mitsubishi WNMG 080412-GM Insert Grade MC7025

10x Mitsubishi WNMG 080412-GM Insert Grade MC7025

WNMG Turning Inserts 80 Trigon Insert MC7025 - ISO M20 - M30 CVD coated grade for high efficiency turning of austenitic stainless steels. Excellent wear resistance in high speed cutting conditions. TiCN and micro grain Al2O3 coating delivers balanced wear and chipping resistance. Specially engineered carbide substrate provides excellent resistance to plastic deformation. Specifically designed for 300 series stainless steel applications. Chipbreaker FH - Finish cutting. First recommendation for finishing carbon steel, alloy steel and stainless steel. Double sided chip breaker. Stable chip control even at small depths of cut. Depth of cut: up to 1mm Feed rate: 0.08 to 0.2mm LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0 Feed rate: 0.10 - 0.40 LP - Light cutting. Butterfly protrusions are optimized for different cutting conditions. Chips curl upwards and reduce cutting resistance, resulting in improved surface finishes. The breaker protrusion is highly resistant to wear even during high-speed machining, delivering stable chip breaking for long periods of time. Excels in copy machining: uses a sharp edge geometry that delivers excellent chip breaking when copy machining and during reverse direction face machining. Depth of cut: 0.3 - 2.0 Feed rate: 0.10 - 0.40 GM - Sub breaker of the main LM and MM chipbreaker. Excellent notch resistance for light to medium cutting. Depth of cut: 1.0 - 3.5 Feed rate: 0.10 - 0.35 MA - For medium cutting of carbon and alloy steels. Double sided chip breaker with positive land which provides a sharp cutting action. Depth of cut: 0.08 to 4mm Feed rate: 0.2 to 0.5mm MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5 Feed rate: 0.15 - 0.30 MP - Medium cutting. Suits a broad range of copy turning conditions, eliminating the need for multiple insert types. Ideal for small cuts: the inner side of the butterfly protrusion has a steep gradient to improve chip breaking performance on small cuts. Depth of cut: 0.3 - 4.0 Feed rate: 0.16 - 0.50 MS - For medium cutting for difficult to machine materials. Excellent for Nickel base alloys, titanium and stainless steels. Depth of cut: 0.40- 1.8 Feed rate: 0.08 - 0.20 MW - Wiper insert for medium cutting of carbon and alloy steel. Double sided chipbreaker. Wiper allows up to double the feed. Wide chip pocket prevents jamming. Depth of cut: 0.9 - 4.0 Feed rate: 0.20 - 0.60 RM - Rough cutting. Excellent fracture resistance. By optimizing the land angle and honing geometry, high cutting edge stability is achieved during interrupted machining. Depth of cut: 2.5 - 6.0 Feed rate: 0.25 - 0.55 RP - Rough cutting. Peninsular protrusion optimised for rough cutting. The gradually sloped cutting face prevents clogging and reduces crater wear. High fracture resistance: the cutting flute has a strong flat-land shape and broad chip pocket to reduce clogging and fracturing during chamfering. Depth of cut: 1.5 - 6.0 Feed rate: 0.25 - 0.60 *General

GBP 109.90
1