cardboard packaging with window from GBP 6 | See the cheapest prices and offers on css.nordicadpartner.dk

Morley 797-064 Glass Door Kit for ZX5e

Morley 797-064 Glass Door Kit for ZX5eGlass front door kit for use with the ZX5e intelligent addressable control panel. The front door is fitted with a plaxiglass window allowing protection suitable for applications what are open to the public. The front door kit is recessed within the existing panel enclosure.

GBP 497.78

1

Morley 797-063 Glass Door Kit for ZX1e amp ZX2e

Morley 797-063 Glass Door Kit for ZX1e ZX2eGlass front door kit for use with the ZX1e ZX2e intelligent addressable control panels. The front door is fitted with a plaxiglass window allowing protection suitable for applications what are open to the public. The front door kit is recessed within the existing panel enclosure.

GBP 306.38

1

Morley SH-001 Flame Detector Sunshield

Morley SH-001 Flame Detector SunshieldThe SH-001 stainless steel sun shield optimizes performance of FS20X FS24X Flame Detectors by reducing the heating effect of the sun and providing protection from rain and snow falling on the window. The sun shield fits between the mounting bracket and the rear of the detector.

GBP 231.34

1

Conventional Deep Base with Schottky Diode - 2020DBSD

Conventional Deep Base with Schottky Diode - 2020DBSDThere are 4 new bases from the new range of Gent conventional fire alarm equipment2020B Standard Base adds 9.5mm to detector height2020BSD Standard Base with Schottky diode2020DB Deep Base adds 21mm to detector height2020DBSD Deep Base with Schottky diodeThe base is compatible with the following2020PT Multi-Function Detector2020P Optical Smoke Detector2020R Rate of Rise Heat Detector2020F 58 Celsius Fixed Temperature Heat Detector2020HF 70 Celsius Fixed Temperature Heat Detector

GBP 9.64

1

Conventional Standard Base with Schottky Diode - 2020BSD

Conventional Standard Base with Schottky Diode - 2020BSDThere are 2 bases from the conventional fire alarm equipment range2020B Standard Base adds 9.5mm to detector height2020BSD Standard Base with Schottky diodeThe base is compatible with the following2020PT Multi-Function Detector2020P Optical Smoke Detector2020R Rate of Rise Heat Detector2020F 58 Celsius Fixed Temperature Heat Detector2020HF 70 Celsius Fixed Temperature Heat Detector

GBP 5.64

1

Morley D2E Duct Detector Housing with B401 Base

Morley D2E Duct Detector Housing with B401 BaseThe InnovairFlex 2DE 2-wire photoelectric duct smoke detector features a pivoting housing that fits various applications both square and rectangular footprints mount to round or rectangular duct work. The new duct smoke detector senses airflow speeds ranging from 1.5-20m per second with proven precision. The enhancements built into this model improve false alarm immunity with plug-in sensor head broaden operation temperature -20 to 70 degree and humidity 0 to 95 percent non-condensing ranges while simplifying installation and maintenance. These advance features can detect smoke even in the harshest duct applications.The new design provides more wiring space with an added 20mm conduit knockout. Numbers and labels for terminal designations are consistent with previous Innovair models. The new sampling tube can be clicked into position with one smooth motion from either the front or the back of the detector.The InnovairFlex D2E duct smoke detector has signals to indicate trouble and maintenance conditions. Additionally a cover tamper feature is incorporated to indicate a trouble condition for removed or improperly installed sensor cover. An improved cover design with an integrated low-flow feature isolates the sensor head from low-flow technology for simple maintenance.Key FeaturesPhotoelectric integrated low-flow technologyAir velocity rating from 1.5 ms to 20.3 msecVersatile mounting options in square or rectangular configuration with modular constructionPlug-in sensorSuperb false alarm immunity with the latest sensor technologyBroader ranges for operating temperature -20C to 70C and humidity 0 to 95 non-condensingPatented sampling tube installs from front or back of the detector with no tools requiredA cover tamper feature to indicate a trouble condition for removed or improperly installed sensor coverIncreased wiring space with 15mm and 20mm conduit knockoutImproved LED status24 VDCBackward compatibility with existing DH400 range including remote accessoriesPlease Note this product does not come complete with a detector please use the 2351E.

GBP 215.50

1

Morley Response Dipole Antenna with 5m Cable HLS-RES-ANT2

Morley Response Dipole Antenna with 5m Cable HLS-RES-ANT2Response Dipole Antenna with 5mtrs cable.

GBP 127.58

1

Morley EVCS-HLJ Loose Handset with Jack Leads

Morley EVCS-HLJ Loose Handset with Jack LeadsThe Roaming Handset is used along with the Jack Plate for Emergency Voice Communication System installations in countries whose fire codes allow for Roaming Handsets. When used together the Roaming Handset and Jack Plate form a Type A Outstation which is compatible with all EVCS systems.Key FeaturesTelecoil for hearing impaired usersFlexible roaming phoneFull duplex operationFull duplex operation allowing 2-way voice communicationPlease Note These units are not suitable for installation in the UK to BS5839 Pt9

GBP 155.36

1

Morley FSL100-TL Flame Detector Test Lamp with Carry Case

Morley FSL100-TL Flame Detector Test Lamp with Carry CaseThe test lamp has been designed for testing the FSL100 range of flame detectors. The test lamp comes complete with a universal charge and carry case.

GBP 1855.22

1

Morley RELT245 24Vdc Relay with 5 Amp Rated VF Changeover Contacts

Morley RELT245 24VdcRelay with 5 Amp Rated VF Changeover Contacts24Vdc relay with 5 amp rated VF changeover contacts 240Vac 3A in enclosure polarised suppressed.

GBP 44.75

1

Morley 795-103 DXc Extension Cover with 80 Zone LED Card

Morley 795-103 DXc Extension Cover with 80 Zone LED Card795-103 extension cover which comes complete with 80 zone LED card for the Morley DXc range of addressable control panels.

GBP 315.34

1

Morley FSL100 IR3 Flame Detector

Morley FSL100 IR3 Flame DetectorThe FSL100 may be small and lightweight for easy installation but it is designed to work in tough indooroutdoor environments as well as potentially explosive atmospheres. With a large field of view it can detect a range of different types of fire including hydrocarbon and non-hydrocarbon sources.Analysis of the flame flicker frequency for improved false alarm rejection. Particularly suited to liquid hydrocarbon and dirty fires. Affected less by window contamination or smoky fires. Good resistance against the influences ofDirect and reflected sunlightArtificial light such as fluorescent tubes and glass covered halogen lampsArcs and electric discharges static or from e.g. electric motorsThe radiation from electric welding provided that the electric welding takes place at distance more than 10 feet from the flame detector a welding rod contains organic compounds which may produce a small flame

GBP 2207.90

1

Morley EVCS-TAP Emergency Assist Alarm Stand Alone Kit with PSU

Morley EVCS-TAP Emergency Assist Alarm Stand Alone Kit with PSUThis is a simple two wire system that has been specifically designed to meet the needs of disabled service users and conforms to all the relevant requirements. The use of combined high output blue LED indication and buzzer ensures a response to the call. The Emergency Assist Alarm Stand Alone Kit comprises of all the components needed to install a fully compliant system with additional parts available separately.Key FeaturesComplies with regulations recommendationsDual loop pull cordHigh contrast labelsBlue indicationQuick and simple installation with limited cabling requirementsHigh contrast printing for increased visibilityTactile braille signage to assist partially sighted people to easily operate the cancel plate

GBP 98.66

1

Morley CWSS-RR-S5 Sounder VAD Beacon Red Body with Red Flash

Morley CWSS-RR-S5 Sounder VAD Beacon Red Body with Red FlashCombined acoustic and optical alarm signalling device is EN 54-3 EN 54-23 compliant in red housing and offers a selection of 32 signal tones including the DIN tone and other country-specific tones. All tones comply with EN 54-3. Tone configuration takes place via a 6-pin DIP switch. Up to two different signal tones may be activated.The optical signalling device with red signal lamp is suitable in accordance with EN 54-23 for square signal ranges W-2.4-6.8 and cylindrical signal ranges C-3-8.9 C-6-8.2. Signalling device with flat base suitable for wall and ceiling mounting. To help define your conventional Visual Alarm Devices VADs requirements in line with the EN54-23 standard.Key FeaturesEN 54-3 and 54-23 compliantSynchronous sound and flash triggerVolume adjustable to 2 levels at the deviceC W categorySignal range up to 6.0 m room width for wall mountingSignal range up to 8.9 m room diameter for ceiling mounting

GBP 90.89

1

Morley B524IEFT-1 Deep Analogue Sensor Base with Built In FET Isolator

Morley B524IEFT-1 Deep Analogue Sensor Base with Built In FET IsolatorThe Deep Analogue Sensor Base with FET Isolator is ideal to use with all System Sensor 200 analogue addressable detectors. The B524IEFT isolator base stops an entire communications loop from being disabled when a short circuit occurs by containing the short from the remainder of the circuit.The base will automatically restore the loop entirety when the cause of the short circuit is corrected. Up to 20 devices can be isolated per isolator base depending on the device type.Key FeaturesIdeal to use with all System Sensor 200 analogue addressable detectorsStops an entire communications loop from being disabled when a short circuit occursBase will automatically restore the loop entirety when the cause of the short circuit is correctedUp to 20 devices can be isolated per isolator base depending on the device typeComes with SEMS screw connections and address identification label

GBP 29.60

1

Morley DNRE Duct Detector Housing with B501AP Base

Morley DNRE Duct Detector Housing with B501AP BaseThe InnovairFlex DNRE intelligent non-relay photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints capable of mounting to a round or rectangular duct. These units can sense smoke in the most challenging conditions operating in airflow speeds of 1.5ms to 20.3msec temperatures of 20 to 70 degrees and a humidity range of 0 to 95 non-condensing.An improved cover design isolates the sensor head from the low-flow feature for simple maintenance. A cover tamper feature was added to indicate a trouble signal for a removed or improperly installed sensor cover. The InnovairFlex housing provides a 20mm conduit knockout and ample space to facilitate easy wiring and mounting of relay module.Key FeaturesPhotoelectric integrated low-flow technologyAir velocity rating from 1.5ms to 20.3secVersatile mounting options square or rectangular configurationBroad ranges for operating temperature 20 to 70 degree and humidity 0-95 non-condensingPatented sampling tube installs from front or back of the detector with no tools requiredNew cover temper signalIncreased wiring space with a newly added 20mm conduit knockoutAvailable space within housing to accommodate mounting of relay moduleEasily accessible code wheels on sensor head sold separatelyClear cover for convenient visual inspectionFor MI-PSE-S2 or MI-PSE-S2I DetectorsRequires DSTXX duct sampling tube

GBP 194.16

1

Morley M5A-RP06FG-K013-01 Addressable Glass Manual Call Point with Isolator

Morley M5A-RP06FG-K013-01 Addressable Glass Manual Call Point with IsolatorThe MI-MCP Series Manual Call Points are designed to provide a manual alarm interface to Morley IASs fire alarm control panel. Installation efficiency flexibility and compliance with the latest standards are at the heart of the call point range.The unique plug and play concept is designed specifically to reduce installation time by using a terminal block which can be wired during the initial installation cabling with a link to provide continuity for testing. During the commissioning phase the links are removed and the terminal block is simply inserted into the connector at the back of the unit.Key FeaturesUnique Plug Play installation conceptRe-settable operating element optionAnalogue addressable communicationsFully compliant with EN54 Part 11Backward compatibilityEnhanced aestheticsIntegral LEDIntegral loop isolation option

GBP 58.52

1

Morley M5A-RP06FF-K013-01 Addressable Flexible Manual Call Point with Isolator

Morley M5A-RP06FF-K013-01 Addressable Flexible Manual Call Point with IsolatorThe MI-MCP Series Manual Call Points are designed to provide a manual alarm interface to Morley IASs fire alarm control panel. Installation efficiency flexibility and compliance with the latest standards are at the heart of the call point range.The unique plug and play concept is designed specifically to reduce installation time by using a terminal block which can be wired during the initial installation cabling with a link to provide continuity for testing. During the commissioning phase the links are removed and the terminal block is simply inserted into the connector at the back of the unit.Key FeaturesUnique Plug Play installation conceptRe-settable operating element optionAnalogue addressable communicationsFully compliant with EN54 Part 11Backward compatibilityEnhanced aestheticsIntegral LEDIntegral loop isolation option

GBP 59.90

1

Morley W1A-R470SG-STCK-01 Surface Outdoor Call Point with 470 Ohm Resistor and N.O. Contact

Morley W1A-R470SG-STCK-01 Surface Outdoor Call Point with 470 Ohm Resistor and N.O. ContactThe W1A-R470SG-STCK-01 is a Surface Outdoor Call Point with 470 Ohm Resistor and N.O Contact. It comes complete with a glass element.The enhanced environmental protection allows the unit to be installed in many external environments where water and dirt are likely to be present making it a true waterproof and outdoor product.Full compliance with the latest standards is essential and the new WCP indoor call point range is fully approved to the latest EN54-11 standard.Key FeaturesIP Rating IP67Comes with resettable glass element

GBP 110.16

1

Morley CWSS-RR-W5 Sounder VAD Beacon Red Body Red Flash with Deep Base

Morley CWSS-RR-W5 Sounder VAD Beacon Red Body Red Flash with Deep BaseHoneywells Non-Addressable Sounder Beacon is ideal for applications where a dual purpose audible and visual alarm device is required. The product features a new folded horn design high output LEDs advanced optics and an innovative lens design providing outstanding sound output and omni-directional light coverage at low current draw. Specifically designed and approved to meet both EN54-3 and EN54-23 the Sounder Beacon delivers outstanding quality reliability and extended operational life.Key FeaturesOmni-directional light coverage eliminates need for device orientation.First fix capability allows electrical continuity testing prior to device fitting.Deep base option with multiple cable entries for flexible installation.Designed with full range of common fixing centres.Positive fit engagement and feedback of base with device for easy installation.

GBP 104.65

1

Morley IAS MI-PTSE-S2I Multi-Sensor Smoke amp Thermal Detector with Isolator

Morley IAS MI-PTSE-S2I Multi-Sensor Smoke Thermal Detector with IsolatorThe multi-criteria multi-sensor MI-PTSE-S2 Photo Thermal detector uses thermal assistance to the core photoelectric smoke detector to give enhanced false alarm immunity and faster response to a wide range of incipient fires.The plug-in unit combines two separate sensing elements that are managed by embedded software to act as a single unit. The MI-PTSE-S2 conforms to EN54-5 a 58C fixed temperature and rate of rise thermal assistance conforming to EN54-7. The thermal detection function combines thermistor technology with a software corrected linear temperature response.

GBP 57.08

1

Morley IAS MI-WSO-PP-I Wall Mounted White Sounder with Loop Isolation

Morley IAS MI-WSO-PP-I Wall Mounted White Sounder with Loop IsolationWall mount sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesLarge cable accessRear or surface cable entryLoop continuity springCommon base with detectors B501APMorley IAS Protocol32 tone selection to cover many marketsAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 49.34

1

Morley IAS MI-WSO-PR-I Wall Mounted Red Sounder with Loop Isolation

Morley IAS MI-WSO-PR-I Wall Mounted Red Sounder with Loop IsolationWall mount sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesLarge cable accessRear or surface cable entryLoop continuity springCommon base with detectors B501APMorley IAS Protocol32 tone selection to cover many marketsAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 40.02

1

Morley M1A-R470FG-STCK-01 Flush Call Point with 470 Ohm Resistor and N.O. Contact

Morley M1A-R470FG-STCK-01 Flush Call Point with 470 Ohm Resistor and N.O. ContactA flush call point with 470 Ohm resistor and N.O. contact which comes complete with glass.Its simple modular design introduces plug-in terminations to the MCP series installation process. First fix installation permits all field wiring to be terminated to the plug whilst the fascia element and lid are kept out of harms way. To help the installer further a simple loop continuity device is included to aid checking of loop wiring before connection to the MCP and the fire alarm system. This new standard conventional break glass offers both clean and monitored contacts in the same housing.Key FeaturesPlug-in terminationsImproved aestheticsMonitored or clean contactsAnti-tamper featuresInterchangeable glass elementIntegrated designFlush call point

GBP 7.54

1

Morley M1A-R470SG-STCK-01 Surface Call Point with 470 Ohm Resistor and N.O. Contact

Morley M1A-R470SG-STCK-01 Surface Call Point with 470 Ohm Resistor and N.O. ContactA surface call point with 470 Ohm resistor and N.O. contact which comes complete with glass.Its simple modular design introduces plug-in terminations to the MCP series installation process. First fix installation permits all field wiring to be terminated to the plug whilst the fascia element and lid are kept out of harms way. To help the installer further a simple loop continuity device is included to aid checking of loop wiring before connection to the MCP and the fire alarm system. This new standard conventional break glass offers both clean and monitored contacts in the same housing.Key FeaturesPlug-in terminationsImproved aestheticsMonitored or clean contactsAnti-tamper featuresInterchangeable glass elementIntegrated designSurface call point

GBP 10.54

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)