sweater with buttons on shoulder from GBP 23 | See the cheapest prices and offers on css.nordicadpartner.dk

Scorpion 1001 Point Head Unit with Fixings SCORP1001

Scorpion 1001 Point Head Unit SCORP1001Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 492.97

1

Scorpion 1011 Point Smoke Detector Tester with Access Point SCORP1011-001

Scorpion 1011 Point Smoke Detector Tester with Access Point SCORP1011-001What is ScorpionScorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required.Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point for use with the NEW Engineers Portable Controller which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activation.Key FeaturesSmoke generation tailored for functional testing of point type smoke detectorsAdjustable smoke time to suit characteristics of system under testClearing function enables quicker reset and reduced repeat alarmsIn excess of 240 tests of 15 seconds per Scorpion Head UnitSuitable detector types Optical photoelectric IonizationBenign particulate avoids material contaminationConsistent repeatable stimulus from one test to the nextApproved by world-leading detector manufacturersThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situationsTrue functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.Kit Includes1 x SCORP 10011 x SCORP 25

GBP 673.33

1

Scorpion 2001 Aspiration Smoke Detection ASD Unit with Fixings SCORP2001

Scorpion 2001 Aspiration Smoke Detection ASD Unit SCORP2001Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required.Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 492.97

1

Solo 611 Urban Lightweight Backpack includes Pole Bag

Solo 611 Urban Lightweight Backpack includes Pole BagA flexible backpack ideal for use on large sites or city working. Includes space for your essential test kit devices small tools accessories. Designed for allowing engineers to move easily around towns large sites or buildings without the need to carry bulk poles and bags. The Solo 611 includes the 612 pole bag.Key FeaturesCustomisable main interior for test equipment battery batons accessoriesPadded compartment for Laptop or tabletLarge zipped pockets for cartridges smaller essentialsFront pocket for A4 notepad small tool sets etc.Clear pocket to promote your own brand or businessAdjustable quick-release clips for Solo 612 Pole bagWide shoulder straps and padded backChest strap for weight balanceLightweight Backpack weighs less than 1.5kgDrinks bottle holderCabin luggage compatible - Based on backpack dimensions. Please check with your individual airline as baggage allowances vary. Poles length 620mm may be allowed when held diagonally

GBP 267.86

1

Scorpion 2011 ASD System Tester with Access Point SCORP2011-001

Scorpion 2011 ASD System Tester with Access Point SCORP2011-001Scorpion is a functional smoke detector test system for aspirating systems. It solves a number of long-standing challenges assists compliance with codes and standards and delivers radical time cost and disruption savings.A Scorpion Head Unit is a smoke generator permanently mounted adjacent to an ASD sampling point - typically at the end of a pipe run. Just one Scorpion Head Unit is needed for each pipe run regardless of the number of sampling points. The generator provides a benign and effectively non-contaminating stimulus with a particulate lifetime in excess of 120 seconds over 100 metre pipe runs. From its permanently fixed position Scorpion provides over 240 controlled and repeatable tests of 15 seconds.By monitoring and recording the Scorpion activation and the alarm signal the transport time is measured. Comparing this against retained commissioning data previous tests and acceptable tolerances enables judgments to be made regarding the integrity of the aspirating system.Scorpion is suitable for all standard ASD type technologies including obscuration particle counting and cloud chamber. It can be retrofitted to existing system or installed as part of a new installations.Key FeaturesSmoke generation tailored for functional testing of ASD systemsAdjustable smoke time to suit characteristics of system under testTransport time function to monitor ongoing ASD system performanceIn excess of 240 tests of 15 seconds per ScorpionSuitable for 120 seconds 100 metre pipe runsLight scatter Particle counting Cloud chambersHelps comply with national and international standards on testing of fire systems.Scorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.Kit Contains1 x SCORP 20011 x SCORP 25

GBP 673.33

1

Solo 613 Urban Lightweight Backpack amp Poles Kit

Solo 613 Urban Lightweight Backpack Poles KitA lightweight practical kit that provides the perfect balance of carrying test equipment for testing up to 4.5 meters alongside your other on-site essentials. A flexible backpack ideal for use on large sites or city working. Includes space for your essential test kit devices small tools accessories. Designed for allowing engineers to move easily around towns large sites or buildings without the need to carry bulk poles and bags.The kit includes a pole bag which comes complete with 1 x 110 1.75m telescopic 3 x 111 0.5m extension poles. The poles are designed to work in conjunction with each other and are used to test detectors up to a maximum working height of 4.5 metres. The pole bag is fastened onto the backpack using adjustable clips.Key FeaturesCustomisable main interior for test equipment battery batons accessoriesPadded compartment for Laptop or tabletLarge zipped pockets for cartridges smaller essentialsFront pocket for A4 notepad small tool sets etc.Clear pocket to promote your own brand or businessAdjustable quick-release clips for Solo 612 Pole bagWide shoulder straps and padded backChest strap for weight balanceLightweight design allows fast and efficient testingPoles are design from a pull-wound glass fibre constructionSimple locking mechanism on the polesUrban telescopic and extension poles are half the length of conventional polesCabin luggage compatible - Based on backpack dimensions. Please check with your individual airline as baggage allowances vary. Poles length 620mm may be allowed when held diagonallyKit Contains1 x Solo 611 Urban Lightweight Backpack1 x Solo 612 Urban Pole Bag1 x Solo 110 Urban 4-section Telescopic Pole 1.75m3 x Solo 111 Urban Extension Poles 0.5m

GBP 1398.04

1

Solo 110 Urban Telescopic Pole 1.75 Metres

Solo 110 Urban Telescopic Pole 1.75 MetresThe Solo 110 Access Pole offers safe access to detectors installed at heights of up to 3 metres. Solo poles should always be held vertically when raising or lowering. Ensure that all extension poles and test tool buttons are locked into position before extension and use. The maximum working height using Solo 110 Solo 111 poles is 4.5 metres for Solo and Testifire. This is achieved using 1 x Solo 110 telescopic pole and a maximum of 3 x Solo 111 extension poles. It is recommended to stand directly under the detector.Key FeaturesExtends to 1.75 metres to provide maximum reach of 3 metresCan be used with up to 3 Solo 111 extension polesPull-wound glass fibre constructionDesigned certified non-conductiveSimple locking mechanismCompatible with the Solo 612 Pole BagUrban telescopic and extension poles are half the length of conventional poles

GBP 610.40

1

Solo 200 Universal Detector Removal Tool

Solo 200 Universal Detector Removal ToolThe Solo 200 universal detector removal tool suitable for use with the majority of detectors on todays market.Colour coded tri-grips twist into place to create different size combinations. The combinations of the tri-grips enable removal replacement of differing size detectors ensuring that one tool is all that you will need.The Solo 200 has a universal joint ensuring that the tool remains parallel with the ceiling while in use providing easy extraction and replacement - even on detectors that cannot be accessed from directly underneath.Ideal for most makes and types of detectorsAllows removal replacement of detectors at anglesAdjustable for different sizes of detectors

GBP 362.95

1

Solo Spare 770 High Capacity Cordless Battery Baton

Solo Spare 770 High Capacity Cordless Battery BatonThe new Solo770 Battery Baton is a higher capacity version 3000mAh of the Solo760 2200mAh. It allows greater efficiency on site as it gives more tests per battery for the same charge time as before but provided by the new Solo727 charger.To help match the battery to the charger a red sleeve has been added to the Solo727 Charger on the battery lead which corresponds to a red collar on the top of the Solo770 battery baton. The Solo770 battery baton should have a life expectancy of 2 years or 500 full charges. You will be able to see when the baton is on its way out as will require constant charging.Solo Battery Batons are used with the Detectortesters range of test equipmentSolo460 Cordless Heat TesterTestifire 1000 Combined Smoke and Heat testerTestifire 2000 Combined Smoke Heat and CO testerScorpion 7000 and 8000 Scorpion Controllers

GBP 183.46

1

Solo 372 Adaptor for Testing ASD Test Points

Solo 372 Adaptor for Testing ASD Test PointsThe Solo 372 works by replacing the clear cup on the Solo 365 and the design of the adapter allows easy alignment with a ASD sampling hole to help provide a functional test of the system. This not only leads to a more professional approach to maintenance but will offer a simpler and cleaner solution which can enable faster testing at a reduced cost.

GBP 141.05

1

Solo C3 CO Detector Test Gas Canister 250ml

Solo C3 CO Detector Test Gas Canister Designed for functional testing of detector testers the Solo C3 Aerosol ensures that detectors that respond to smoke are in full working order. Non-flammable this product is the professionals choice for value in aerosol smoke.Carbon Monoxide CO detectors operate by using an electrochemical cell which is able to detect CO in the atmosphere and is set at a predetermined threshold. The only way to correctly test a CO detector is to introduce CO safely to the sensor from the outside demonstrating free flow from the atmosphere to the sensor.The CO contained within the Solo C3 CO canister is at a level which poses no threat to the user when used correctly. Solo CO is formulated for use with the Solo 330 Dispenser. This prevents dissipation of the CO which would occur if used handheld.CO detectors are less common that smoke and heat detectors however when installed they still need to be tested. With all our products we pride ourselves on offering genuine choice and CO testing is no different.The need for carbon monoxide testers has increased in recent years thanks to widespread media coverage focusing on the danger of CO often referred to as the silent killer. More and more domestic properties including rentals now have carbon monoxide alarms installed and these too should be tested.Key FeaturesDetector manufacturer endorsedNon-flammable CO stimulusEnables controlled delivery over short burstsCompatible with Solo 330332 dispenserPlease note Due to the nature of the contents it is usual for this can to feel very light as stated on the back of the can.

GBP 22.50

1

TC3-001 Testifire CO Capsule

TC3-001 Testifire CO CapsuleTestifires CO stimulus is unique because unlike pressurised CO canisters the CO is generated on demand from activated carbon supplied in capsule form with no pressure or stored CO. The number of tests from a capsule is dictated by the response time of the detectors under test and can range between 50 and 150 tests. Although there is much more to the comparison than material cost typically this equates to between four and eight times that produced by an aerosol.

GBP 82.50

1

Solo 365 Urban Smoke Detector Test Kit 5 Metres

Solo 365 Urban Smoke Detector Test Kit 5 MetresThe urban kit is designed for engineers on the go move quickly between sites with compact industry leading test kits designed for speed and agility.All your fire detector test kit including our new short poles in a compact backpack. These brand new urban kits make moving around sites or whilst travelling comfortable and hassle free.Key FeaturesConvenient - 50 shorter access poles mean less disruption when testingQuicker movement between and around sitesLightweight - weighs less than 4kgPractical - easily and quickly test all detectors up to 5m reachMobile - ideal for use on large sites or city workingFlexible - includes space for your devices small tools accessoriesKit Contains1 x Urban Backpack including pole bag1 x 4-section Telescopic Pole 1.75m3 x Urban Extension Poles 0.5m1 x Solo 365 Smoke Detector Test Kit which contains 1x Solo 365 Head Unit 1x Solo 370 Battery Pack 1x Solo 371 Smoke Generator 1x ES3 Smoke Cartridge 1x Spare 1060 Charger USB Lead

GBP 2291.18

1

Solo Spare 1005 Silicon Membrane

Solo Spare 1005 Silicon MembraneSolo Service Spare 1005 is a Replacement Silicon Membrane For The Solo 423424461 Heat Detector Test Cup and For The Tester Cup on the 330 Series Smoke CO Dispensers.

GBP 23.90

1

Solo 602 Solo Pole Carry Case

Solo 602 Solo Pole Carry CaseThe Carry case is a purpose built carry bag which holds the solo range of poles. Although very practical it also gives a professional look when arriving on site.

GBP 45.90

1

Scorpion 25 Access Point SCORP25

Scorpion 25 Access Point SCORP25Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree Approvals Scorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 136.62

1

Scorpion 7000 Portable Controller SCORP7000

Scorpion 7000 Portable Controller SCORP7000Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 1260.83

1

Scorpion 8000 Control Panel SCORP8000

Scorpion 8000 Control Panel SCORP8000Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 914.99

1

TC3-6PACK-001 Replacement Testifire CO Capsules

TC3-6PACK-001 Replacement Testifire CO CapsulesTestifires CO stimulus is unique because unlike pressurised CO canisters the CO is generated on demand from activated carbon supplied in capsule form with no pressure or stored CO. The number of tests from a capsule is dictated by the response time of the detectors under test and can range between 50 and 150 tests. Although there is much more to the comparison than material cost typically this equates to between four and eight times that produced by an aerosol.Image shows only one CO Capsule - there are six in a pack

GBP 494.99

1

TC3-3PACK-001 Replacement Testifire CO Capsules

TC3-3PACK-001 Replacement Testifire CO CapsulesTestifires CO stimulus is unique because unlike pressurised CO canisters the CO is generated on demand from activated carbon supplied in capsule form with no pressure or stored CO. The number of tests from a capsule is dictated by the response time of the detectors under test and can range between 50 and 150 tests. Although there is much more to the comparison than material cost typically this equates to between four and eight times that produced by an aerosol.Image shows only one CO Capsule - there are three in a pack

GBP 288.61

1

Testifire TESTIFIRE25-001 Spare Remote

Testifire TESTIFIRE25-001 Spare RemoteGeneration of test stimuli starts when Testifire is positioned over a detector and the infrared beam within the transparent cup is interrupted. Certain detectors such as those with virtual chambers have no physical features to cause stimuli generation to start. The Optional Testifire 25 Infrared Remote Control can be used to initiate the test procedure in such situations.The Remote control is operated by aiming the LED towards Testifire when it is at height and the control button is used to startstop a test andor move on to the next test in the sequence.

GBP 139.67

1

Testifire 1001 Urban Smoke amp Heat Detector Test Kit 5 Metres

Testifire 1001 Urban Smoke Heat Detector Test Kit 5 MetresThe urban kit is designed for engineers on the go move quickly between sites with compact industry leading test kits designed for speed and agility.All your fire detector test kit including our new short poles in a compact backpack. These brand new urban kits make moving around sites or whilst travelling comfortable and hassle-free.Key FeaturesConvenient - 50 shorter access poles mean less disruption when testingQuicker movement between and around sitesLightweight - weighs less than 4kgPractical - easily and quickly test all detectors up to 5m reachMobile - ideal for use on large sites or city workingFlexible - includes space for your devices small tools accessoriesKit Contains1 x Urban Backpack including pole bag1 x 4-section Telescopic Pole 1.75m3 x Urban Extension Poles 0.5m1 x Testifire 1000-001 Head Unit inside the 1001-001 box it will also include 1 x TS3-001 Smoke Capsule 1 x Solo 770-001 Battery Baton option to buy second baton in the drop-down box and 1 x Solo 727-001 Multi Voltage Fast Charger

GBP 2408.67

1

Testifire 2001 Urban Smoke Heat amp CO Detector Test Kit 5 Metres

Testifire 2001 Urban Smoke Heat CO Detector Test Kit 5 MetresThe urban kit is designed for engineers on the go move quickly between sites with compact industry leading test kits designed for speed and agility.All your fire detector test kit including our new short poles in a compact backpack. These brand new urban kits make moving around sites or whilst travelling comfortable and hassle-free.Key FeaturesConvenient - 50 shorter access poles mean less disruption when testingQuicker movement between and around sitesLightweight - weighs less than 4kgPractical - easily and quickly test all detectors up to 5m reachMobile - ideal for use on large sites or city workingFlexible - includes space for your devices small tools accessoriesKit Contains1 x Urban Backpack including pole bag1 x 4-section Telescopic Pole 1.75m3 x Urban Extension Poles 0.5m1 x Testifire 2000-001 Head Unit inside the 2001-001 box it will also include 1 x TS3-001 Smoke Capsule 1 x TC3-001 CO Capsule 1 x Solo 770-001 Battery Baton option to buy second baton in the drop-down box and 1 x Solo 727-001 Multi Voltage Fast Charger

GBP 4297.49

1

Solo High Capacity Charger amp Battery Baton Kit

Solo High Capacity Charger Battery Baton KitThe new Solo770 Battery Baton is a higher capacity version 3000mAh of the Solo760 2200mAh. It allows greater efficiency on site as it gives more tests per battery to detectors for the same charge time as before but provided by the new Solo727 charger. This Solo727 charger provides the same functionality as before enabling fast charging of Battery Batons from both mains power and in-vehicle outlets.The Solo727 charger offers backwards compatibility and will charge both the Solo760 and Solo770 battery batons.Kit Contains1 x Solo 727 High Capacity Battery Charger1 x Solo 770 High Capacity Battery BatonProducts used forSolo460 Cordless Heat TesterTestifire 1000 Combined Smoke and Heat testerTestifire 2000 Combined Smoke Heat and CO testerScorpion 7000 and 8000 Scorpion ControllersTo help match the battery to the charger a red sleeve has been added to the Solo727 Charger on the battery lead which corresponds to a red collar on the top of the Solo770 battery baton. Always ensure that the correct pairing of battery baton and charger is used. No damage will occur if they are mismatched.

GBP 386.82

1

Testifire XTR2 TESTIFIRE-XTR2-HEAD-001 All-In-One Connected SmokeHeat Detector Test Head

Testifire XTR2 TESTIFIRE-XTR2-HEAD-001 All-In-One Connected SmokeHeat Detector Test HeadTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesWorks with the Detectortesters-connect AppAuto generates test reportFeatures clearing mode to eliminate repeat alarmsHigh heat setting allows for testing of heat detectors set to 100cAuto LED torch for testing in dark areasDT-ConnectThe DT-Connect app enhances the XTR2 by enabling users to monitor log and manage testing activities through a single platform.Standard DT-Connect FeaturesJob Creation Easily create and track testing tasks.Basic Test Result Capture Log key test results to meet compliance requirements.Premium DT-Connect Features 19.99 per month per device after a 90-day free trialAddressable Panel Time Logging Sync test times with panel events.Asset Management Track on-site assets and their testing history.Panel Reconciliation Verify test results via control panel alarms.Detailed Reports Generate comprehensive reports PDF or CSV.Full Test History Access a complete history of detector tests.Client Reporting Share reports with clients for compliance and system transparency.The premium plan offers advanced features tailored for engineers seeking detailed reporting and efficient control over their testing processes. After a 90-day free trial the premium subscription costs 19.99 per month per device and unlocks all the advanced features.

GBP 1624.84

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)