smoothie blender to go from GBP 0 | See the cheapest prices and offers on css.nordicadpartner.dk

Sherwood 6MM HSS-Cobalt Weldon C/P Ripper

Regular Series - Multi Flute. Centre cutting. Weldon shank to DIN1835B. Cutting diameter to js12. Shank diameter to h6. Manufactured to DIN standards.

GBP 0.00

1

Sherwood 43/64" HSS SP/FL PARALLEL HAND REAMER

Inch. Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328-4 and DIN 206B. INCH TOLERANCES: Diameter: ~ up to 0.1181. Tolerance: +0.0005, -0.0013. Diameter: Over 0.1181 ~ up to 0.2362. Tolerance: +0.0004, -0.0002. Diameter: Over 0.2362 ~ up to 0.3937. Tolerance: +0.0005, -0.0002. Diameter: Over 0.3937 ~ up to 0.7087. Tolerance: +0.0006, -0.0003. Diameter: Over 0.7087 ~ up to 1.1811. Tolerance: +0.0007, -0.0004. Diameter: Over 1.1811 ~ up to 1.9685. Tolerance: +0.0008, -0.0004. Diameter: Over 1.9685 ~ up to 3.1496. Tolerance: +0.0010, -0.0005.

GBP 0.00

1

Sherwood 35/64" HSS SP/FL PARALLEL HAND REAMER

Inch. Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328-4 and DIN 206B. INCH TOLERANCES: Diameter: ~ up to 0.1181. Tolerance: +0.0005, -0.0013. Diameter: Over 0.1181 ~ up to 0.2362. Tolerance: +0.0004, -0.0002. Diameter: Over 0.2362 ~ up to 0.3937. Tolerance: +0.0005, -0.0002. Diameter: Over 0.3937 ~ up to 0.7087. Tolerance: +0.0006, -0.0003. Diameter: Over 0.7087 ~ up to 1.1811. Tolerance: +0.0007, -0.0004. Diameter: Over 1.1811 ~ up to 1.9685. Tolerance: +0.0008, -0.0004. Diameter: Over 1.9685 ~ up to 3.1496. Tolerance: +0.0010, -0.0005.

GBP 0.00

1

Sherwood 2.50MM HSS-Cobalt S/S Sp/Fl Chucking Reamer

Manufactured to DIN 212. Tolerances (to H7) Diameter: ~ up to 5.50. Tolerance: +0.004, -0.000. Diameter: Over 5.50 ~. Tolerance: +0.005, -0.000.

GBP 0.00

1

Sherwood 16.00MM HSS-Co 2 Flute Weldon Shank Ball Nose Long Series Slot Drills

HSS-Co 2 Flute Weldon Shank Ball Nose Long Series Slot Drills Centre cutting Weldon shank Cutting diameter to e8 Shank diameter to h6 Manufactured to DIN 1835B

GBP 0.00

1

8MM HSS Plain Shank Corner Rounding Cutter

Metric Sizes Designed to produce convex corner radii. For milling structural, carburising and heat treated steel up to 900N/mm2. Manufactured to works standards. 5 RH Flutes. Bright finish, straight helix. Radii tolerance: 0.005".

GBP 0.00

1

Sherwood 3/4"x1/32"x1/4" HSS SMALL CIRCULAR SAW

Inch Small circular saws. Hollow ground to give the clearance necessary for deep cutting. Note: Sizes up to 11/2" diameter do not have keyways.

GBP 0.00

1

25.50MM HSS T/S Drill

Series T100 HSS taper shank drills are designed to drill steels with a tensile strength up to 1.000 N/mm2 as well as cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Features and Benefits HSS for excellent tool durability Oxidised finish for excellent heat and wear resistance Designed to drill steels with a tensile strength up to 1.000 N/mm2 Standards Manufacturing Standard: DIN 345

GBP 0.00

1

Sherwood 6.20MM HSS T/S Drill

Series T100 HSS taper shank drills are designed to drill steels with a tensile strength up to 1.000 N/mm2 as well as cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Features and Benefits HSS for excellent tool durability Oxidised finish for excellent heat and wear resistance Designed to drill steels with a tensile strength up to 1.000 N/mm2 Standards Manufacturing Standard: DIN 345

GBP 0.00

1

Sherwood 8.80MM HSS T/S Drill

Series T100 HSS taper shank drills are designed to drill steels with a tensile strength up to 1.000 N/mm2 as well as cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Features and Benefits HSS for excellent tool durability Oxidised finish for excellent heat and wear resistance Designed to drill steels with a tensile strength up to 1.000 N/mm2 Standards Manufacturing Standard: DIN 345

GBP 3.99

1

Sherwood 5.20MM HSS T/S Drill

Series T100 HSS taper shank drills are designed to drill steels with a tensile strength up to 1.000 N/mm2 as well as cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Features and Benefits HSS for excellent tool durability Oxidised finish for excellent heat and wear resistance Designed to drill steels with a tensile strength up to 1.000 N/mm2 Standards Manufacturing Standard: DIN 345

GBP 4.29

1

Sherwood 3.00MM HSS T/S Drill

Series T100 HSS taper shank drills are designed to drill steels with a tensile strength up to 1.000 N/mm2 as well as cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Features and Benefits HSS for excellent tool durability Oxidised finish for excellent heat and wear resistance Designed to drill steels with a tensile strength up to 1.000 N/mm2 Standards Manufacturing Standard: DIN 345

GBP 4.29

1

26.00MMX121.00MM O/A HSS-Co Plain Shank 4 Flute End Mills

Regular Length Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30 Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A. METRIC TOLERANCES: Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130. Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000.

GBP 0.00

1

Sherwood 17.00MMX92.00MM O/A HSS-Co Plain Shank 4 Flute End Mills

Regular Length Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30 Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A. METRIC TOLERANCES: Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130. Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000.

GBP 0.00

1

Sherwood 3 Morse Taper - Metric

Metric 3 morse taper, general purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118, helix angle: normal, web thickness: standard, relief angle 8 - 20, tolerance of diameter: h8. Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1.

GBP 0.00

1

8MMX69MM O/A HSS-Cobalt 2 Fl B/N Pl/Sh Slot Drill

Plain shank slot drill used for profile milling, milling keyways and producing open slots. Centre cutting 2 Flute Bright finish 30 Helix Dimensions to DIN 844. Plain shank to DIN 1835A

GBP 0.00

1

Sherwood 10.00MM HSS T/S Sp/Fl Chucking Reamer

Metric. The European version of machine reamers ideally suited for use on high performance CNC machines. They are also available, to special order, with a higher cobalt content or made from solid carbide for the machining of tougher more exotic materials. Manufactured to BS 328-4 and DIN 208. Metric Limits of Tolerance (to H7) - See left hand side.

GBP 0.00

1

Sherwood 9/16" HSS-Co 5% 2 Flute Threaded Shank Short Series Slot Drill

Short Series - Metric. Bright finish. Flute type: 30 helix. Manufactured to BS 122: Part 4: 1980. Inch Tolerances: Diameter: ~ up to 1/2". Tolerance: +0.0005, -0.0013. Diameter: Over 1/2". Tolerance:+0.0005, -0.0015.

GBP 0.00

1

Sherwood 6.30mm HSS Bell Type Centre Drill

Manufactured to BS328:Part 2:1986, DIN333, ISO2540.

GBP 0.00

1

Sherwood 6"x5/64"x1" HSS SLITTING SAW 46T

Inch. High speed steel slitting saws are hollow ground to give the clearance necessary for deep cutting. Available in coarse and fine teeth, number of teeth specified below. Supplied with keyways as standard. Manufactured to BS122.

GBP 0.00

1

Sherwood 5"x1/8"x1" HSS SLITTING SAW 42T

Inch. High speed steel slitting saws are hollow ground to give the clearance necessary for deep cutting. Available in coarse and fine teeth, number of teeth specified below. Supplied with keyways as standard. Manufactured to BS122.

GBP 0.00

1

Sherwood 4"x5/32"x1" HSS SLITTING SAW 34T

Inch. High speed steel slitting saws are hollow ground to give the clearance necessary for deep cutting. Available in coarse and fine teeth, number of teeth specified below. Supplied with keyways as standard. Manufactured to BS122.

GBP 0.00

1

Sherwood 6MMX2MMX120MM HSS E/L Centre Drill

Metric Series Ground flute, for drilling centre holes on components prior to machining. Extra length drills particularly useful for drilling centre holes in recesses. Manufactured to BS 328 : Part 1 : 1986, DIN333A : ISO 86, ISO2540, ISO2541.

GBP 3.99

1

Sherwood 4MMX1MMX120MM HSS E/L Centre Drill

Metric Series Ground flute, for drilling centre holes on components prior to machining. Extra length drills particularly useful for drilling centre holes in recesses. Manufactured to BS 328 : Part 1 : 1986, DIN333A : ISO 86, ISO2540, ISO2541.

GBP 2.59

1

Sherwood 5MMX1.6MMX120MM HSS E/L Centre Drill

Metric Series Ground flute, for drilling centre holes on components prior to machining. Extra length drills particularly useful for drilling centre holes in recesses. Manufactured to BS 328 : Part 1 : 1986, DIN333A : ISO 86, ISO2540, ISO2541.

GBP 2.59

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Size

Merchant

Price (EUR)

Sherwood 6MM HSS-Cobalt Weldon C/P Ripper

Sherwood 43/64" HSS SP/FL PARALLEL HAND REAMER

Sherwood 35/64" HSS SP/FL PARALLEL HAND REAMER

Sherwood 2.50MM HSS-Cobalt S/S Sp/Fl Chucking Reamer

Sherwood 16.00MM HSS-Co 2 Flute Weldon Shank Ball Nose Long Series Slot Drills

8MM HSS Plain Shank Corner Rounding Cutter

Sherwood 3/4"x1/32"x1/4" HSS SMALL CIRCULAR SAW

25.50MM HSS T/S Drill

Sherwood 6.20MM HSS T/S Drill

Sherwood 8.80MM HSS T/S Drill

Sherwood 5.20MM HSS T/S Drill

Sherwood 3.00MM HSS T/S Drill

26.00MMX121.00MM O/A HSS-Co Plain Shank 4 Flute End Mills

Sherwood 17.00MMX92.00MM O/A HSS-Co Plain Shank 4 Flute End Mills

Sherwood 3 Morse Taper - Metric

8MMX69MM O/A HSS-Cobalt 2 Fl B/N Pl/Sh Slot Drill

Sherwood 10.00MM HSS T/S Sp/Fl Chucking Reamer

Sherwood 9/16" HSS-Co 5% 2 Flute Threaded Shank Short Series Slot Drill

Sherwood 6.30mm HSS Bell Type Centre Drill

Sherwood 6"x5/64"x1" HSS SLITTING SAW 46T

Sherwood 5"x1/8"x1" HSS SLITTING SAW 42T

Sherwood 4"x5/32"x1" HSS SLITTING SAW 34T

Sherwood 6MMX2MMX120MM HSS E/L Centre Drill

Sherwood 4MMX1MMX120MM HSS E/L Centre Drill

Sherwood 5MMX1.6MMX120MM HSS E/L Centre Drill

NORDIC AD PARTNER

Powered by Cobiro