Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Vi er 100% dedikerede til Google Annoncering – Vi har mange års erfaring med Google Ads og den bruger vi på at opsætte, optimere & vedligeholde vores fantastiske kunders konti.

100% Specialiseret i Google Ads
Vi har mange års erfaring fra +300 konti
Ingen lange bindinger & evighedskontrakter
Jævnlig opfølgning med hver enkelt kunde
Vi tager din virksomhed seriøst
KONTAKT OS
LÆS UDTALELSER & SUCCESHISTORIER

47 results (0,15098 seconds)

Show all filters

Brand

Colour

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Watco Industrial Wall Coating Light Grey

Watco Industrial Wall Coating Light Grey

Images for illustration purposes onlyThis industrial coating provides superb hiding power with just one application. Specially formulated for industrial and commercial premises, it covers normally in one thick coat to provide, in half the time, a bright clean appearance to walls and ceilings. The special high build, non-drip formulation eases application. Recommended areas of useSpecially formulated for industrial and commercial premisesFeaturesCovers in one coatHigh build, non drip formulationFast drying and easy to applyCan be spray applied

GBP 149.99
1

Watco Chemi-Coat Light Grey, 4L

Watco Chemi-Coat Light Grey, 4L

Images for illustration purposes only Watco Chemi-Coat is a one coat high build epoxy resin coating which offers excellent durability and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer. Features Excellent resistance to many chemicals Suitable for a variety of floor and wall surfaces Low solvent content Approved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature) Coverage approx. 18m per 4L pack maximum allowing for one coat by roller. Brush application may result in reduced coverage One coat normally sufficient

GBP 279.99
1

Watco Chemi-Coat Rapid Light Grey, 4L

Watco Chemi-Coat Rapid Light Grey, 4L

Images for illustration purposes onlyWatco Chemi-Coat Rapid is a high build, tough floor coating which hardens rapidly and has good resistance to spillages of a wide range of chemicals. FeaturesEasy to mix two part epoxy resin formulaCures rapidly to form a high build (250300 micron thick) glossy coatingHard wearing surface ideal for heavy use areasOnly one coat usually required (although rapid curing allows 2 coats to be applied in one day) Virtually solvent free formula which can be used over most existing paints and coatingsWill accept light traffic after 4 5 hours and normal traffic after 12 hours (at 20C) Approved for use on concrete with under floor heating systems (up to 30C surface temperature)

GBP 299.99
1

Watco Resiflow Super Gloss Light Grey, 20KG

Watco Resiflow Super Gloss Light Grey, 20KG

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Resiflow Super Gloss into a class of its own. This one coat, high build, self-levelling epoxy resin finish, leaves a smooth, exceptionally high gloss surface, which is both attractive and easy to keep clean. This high performance formulation is usually applied at 1-2mm thick, but can be applied up to 5mm in one application. It is our ultimate floor covering for durability and appearance.Resiflow Supergloss has very good general chemical resistance, but this has been enhanced to Excellent for Resiflow Chemical Grade. If slip resistance, as well as excellent chemical resistance is important, apply one coat of Watco Protecta-Coat Anti Slip (62 PTV) , a clear, glossy, polyaspartic resin, over the top.Both grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion and flexibility, and they have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useProduction areasShowroomsReception areasClean roomsWorkshopsWarehousesSwitchgear and plant roomsFood & pharmaceutical processing, storage and laboratory areasFeaturesOur top of the range high gloss, high performance, high build epoxy resin self-levelling floor finishSuperior wear and abrasion resistance with just one 1-2mm thick applicationCan be applied up to 5mm thick if requiredExtremely easy to keep cleanExcellent resistance to oils and general chemical spillagesResiflow Chemical Grade has exceptional resistance to aggressive chemicalsPerfect for floors where high levels of hygiene are importantLow odour safe to use in confined spacesSuperior performance demonstrated by ISO testing to CE Mark EN1504-2Curing Times Recoat Time (if required) Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 16 hours 12 hours 24 hours 48 hours 7 days20C 16 hours 8 hours 16 hours 48 hours 7 days 30C 16 hours 6 hour 16 hours 27 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 269.99
1

Watco Resiflow Chemical Grade Light Grey, 20KG

Watco Resiflow Chemical Grade Light Grey, 20KG

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Resiflow Supergloss into a class of its own. This one coat, high build, self-levelling epoxy resin finish, leaves a smooth, exceptionally high gloss surface, which is both attractive and easy to keep clean. This high performance formulation is usually applied at 1-2mm thick, but can be applied up to 5mm in one application. It is our ultimate floor covering for durability and appearance.Resiflow Supergloss has very good general chemical resistance, but this has been enhanced to Excellent for Resiflow Chemical Grade. If slip resistance, as well as excellent chemical resistance is important, apply one coat of Watco Protecta-Coat Anti Slip (62 PTV) , a clear, glossy, polyaspartic resin, over the top.Both grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion and flexibility, and they have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useProduction areasShowroomsReception areasClean roomsWorkshopsChemical storage areasWarehousesSwitchgear and plant roomsFood & pharmaceutical processing, storage and laboratory areasFeaturesOur top of the range high gloss, high performance, high build epoxy resin self-levelling floor finishSuperior wear and abrasion resistance with just one 1-2mm thick applicationCan be applied up to 5mm thick if requiredExtremely easy to keep cleanExcellent resistance to oils and general chemical spillagesResiflow Chemical Grade has exceptional resistance to aggressive chemicalsPerfect for floors where high levels of hygiene are importantLow odour safe to use in confined spacesSuperior performance demonstrated by ISO testing to CE Mark EN1504-2Curing Times Recoat Time (if required) Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 16 hours 12 hours 24 hours 48 hours 7 days20C 16 hours 8 hours 16 hours 48 hours 7 days 30C 16 hours 6 hour 16 hours 27 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99
1

6x Watco Epoxicote High Build Anti Slip Rapid Light Grey, 4L

6x Watco Epoxicote High Build Anti Slip Rapid Light Grey, 4L

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 1679.94
1

Watco Epoxicote High Build Anti Slip Rapid Light Grey, 4L EHBRASLGRY4

Watco Epoxicote High Build Anti Slip Rapid Light Grey, 4L EHBRASLGRY4

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 309.99
1

Watco Chemi-Coat Acid Strength Light Grey, 4L

Watco Chemi-Coat Acid Strength Light Grey, 4L

Images for illustration purposes onlyWatco Chemi-Coat Acid Strength is a virtually solvent free, one coat epoxy resin industrial paint. FeaturesA single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy PrimerResists up to 98% strength Sulphuric AcidThick coating is ideal for chemical bund areasSmooth, glossy, wipe clean surfaceHeavy duty high build formulaApproved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature)

GBP 309.99
1

Watco Chemi-Coat Cold Cure Light Grey, 4L

Watco Chemi-Coat Cold Cure Light Grey, 4L

Images for illustration purposes onlyChemi-Coat Cold Cure is a one coat tough industrial paint with excellent durability and chemical resistance. It is suitable for a variety of floor surfaces as well as being solvent free. It provides a superb glossy, hygienic and easily cleaned surface and will cure at temperatures as low as 0C. It allows refrigeration areas and unheated warehousing to be painted and protected at any time of the year.FeaturesExcellent resistance to many chemicalsSuitable for a variety of floor and wall surfacesVirtually solvent freeReady for heavy traffic after 48 hours at 5C

GBP 299.99
1

Watco Chemi-Coat Anti Slip Light Grey, 4L

Watco Chemi-Coat Anti Slip Light Grey, 4L

Images for illustration purposes onlyWatco Chemi-Coat Anti Slip is a one coat high build epoxy resin coating which offers excellent slip resistance and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer.Recommended areas of useAreas where chemical spillage or heavy wear occur.FeaturesHard aluminium oxide grit for maximum wear resistanceTough epoxy resin base resistant to many chemicalsLow solvent contentSuperb glossy appearanceEasy to apply - aluminium oxide grit is pre-blended into the curing agent, so this is a simple two componant application

GBP 279.99
1

6x Watco Epoxicote High Build Anti Slip Light Grey, 4L EHBASLGRY4

6x Watco Epoxicote High Build Anti Slip Light Grey, 4L EHBASLGRY4

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full Use Epoxicote High Build & Anti Slip 10C 20C 30C 16 hours 10 hours 6 hours 12 hours 6 hours 4 hours 24 hours 16 hours 8 hours 48 hours 48 hours 16 hours Epoxicote Cold Cure 5C 10C 20C 30C 24 hours 16 hours 12 hours 6 hours 16 hours 12 hours 6 hours 4 hours 30 hours 24 hours 16 hours 8 hours 72 hours 48 hours 48 hours 16 hours Epoxicote Rapid, Advanced, Advanced Anti Slip 10C 20C 30C 12 hours 6 hours 4 hours 8 hours 4 hours 3 hours 16hours 8 hours 6 hours 48 hours 16hours 16 hours Full Chemical Resistance: 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1679.94
1

Watco Epoxicote High Build Anti Slip Light Grey, 4L

Watco Epoxicote High Build Anti Slip Light Grey, 4L

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full Use Epoxicote High Build & Anti Slip 10C 20C 30C 16 hours 10 hours 6 hours 12 hours 6 hours 4 hours 24 hours 16 hours 8 hours 48 hours 48 hours 16 hours Epoxicote Cold Cure 5C 10C 20C 30C 24 hours 16 hours 12 hours 6 hours 16 hours 12 hours 6 hours 4 hours 30 hours 24 hours 16 hours 8 hours 72 hours 48 hours 48 hours 16 hours Epoxicote Rapid, Advanced, Advanced Anti Slip 10C 20C 30C 12 hours 6 hours 4 hours 8 hours 4 hours 3 hours 16hours 8 hours 6 hours 48 hours 16hours 16 hours Full Chemical Resistance: 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99
1

Watco Bund Sealer Light Grey, 4L

Watco Bund Sealer Light Grey, 4L

Images for illustration purposes onlyWatco Bund Sealer is a two part, thick epoxy resin, one coat is generally enough to achieve a waterproof seal that is highly chemical resistant. New easier to apply formula with glass reinforcement for even greater resistance to chemical attack.Recommended areas of useProtection to metal tanks and pipesCan be used to protect metal and concrete structures prior to sinking into earth or waterFeaturesSuitable for internal and external useCan be applied to damp surfacesExcellent resistance to petrol, diesel, acids, alkalis and solvents (see datasheet) Fills cracks between bund wall and floorFlexible chemical and waterproof coatingGuarantees exceptional resistance to chemicals - including skydrolCan be used with Watco Fibreglass Reinforcing Tape to fill cracks and joints between bund wall and floor

GBP 299.99
1

6x Watco Epoxy Gloss Coat Hygienic Light Grey EGCHYGBEFRAL7035

6x Watco Epoxy Gloss Coat Hygienic Light Grey EGCHYGBEFRAL7035

Images for illustration purposes onlyWatco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1379.94
1

Watco Epoxy Matt Coat Light Grey

Watco Epoxy Matt Coat Light Grey

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 249.99
1

Watco Safety Coat Hygienic Light Grey

Watco Safety Coat Hygienic Light Grey

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Safety Coat Hygienic incorporates Silver Ion technology and is ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 299.99
1

Watco Concrete Sealer Water Based 5L

Watco Concrete Sealer Water Based 5L

Images for illustration purposes onlyWatco Concrete Sealer Water Based seals and hardens new and old bare, porous concrete floors and screeds. It is micro-porous which allows the surface to breathe.Watco Concrete Sealer Water Based contains a micronised acrylic which penetrates deep into porous surfaces to bind, harden and seal. The cross linking properties of the acrylic dries to form a surface film, providing a more stain resistant, easier to clean finish. The appearance can vary from low sheen to gloss depending upon the porosity of the substrate and the number of coats applied. It is quick and easy to apply and most suited for use in warehouses and production areas, or anywhere which would benefit from a penetrative, dustproof, virtually odourless sealer for medium trafficked areas.Concrete Sealer Water Based is also available in a light grey finish, which both seals and tints the floor at the same time. Concrete Sealer Water Based is breathable, virtually solvent free and safe for use in confined areas. It has an A+ VOC emissions rating with a very low VOC content.Recommended areas of useWarehousesProduction AreasGaragesStorage roomsFeaturesClear, acrylic, water based sealerAlso available in a light grey tinted version to both seal and add colourPenetrates, dustproofs and hardens in just one coatSingle pack sealer easy to applyReady for full use after 24 hoursOnly one coat is generally needed saving on downtimeMinimal darkening effect on most surfacesBreathableVirtually solvent free and low odourGlossy finish stain resistant and easy to keep clean Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 8 hours 6 hours 12 hours 24 hours 20C 6 hours 4 hours 12 hours 24 hours 30C 6 hours 2 hour 12 hours 24 hours Light Traffic: Foot, trolley, pallet truck, occasional forkliftFull use: Regular forklift, heavy footfall, parked vehicles

GBP 119.99
1

6x Watco Epoxy Matt Coat Light Grey EMCBEFRAL7035

6x Watco Epoxy Matt Coat Light Grey EMCBEFRAL7035

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1379.94
1

Watco Epoxy Gloss Coat Light Grey

Watco Epoxy Gloss Coat Light Grey

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 219.99
1

Watco Anti Slip Traffic Paint Light Grey 5L

Watco Anti Slip Traffic Paint Light Grey 5L

Images for illustration purposes onlyWatco Anti Slip Traffic Paint is a flexible, anti slip coating which transforms and brightens up asphalt, and offers a good degree of slip resistance with just one high build application.Anti Slip Traffic Paint contains a pre-blended aggregate which provides a finely textured slip resistant surface. It leaves a more uniform and easily cleaned finish than conventional anti slip coatings where grit is sprinkled on separately.This abrasion resistant, waterproof coating is most suited for use in light to medium trafficked areas, private asphalt driveways, tennis courts, playgrounds and warehouses. Watco Heavy Duty Anti Slip Traffic Paint is available for heavier wear external areas.Anti Slip Traffic Paint is quick and easy to use for painting large areas, and ideal for highlighting hazards, marking out parking bays and pedestrian areas, and for using with Watco Stencils. This coating has excellent UV resistance which helps protect against fading. Anti Slip Traffic Paint carries CE Mark EN 1504-2 and has impressive test results for slip resistance, hardness, abrasion, adhesion, impact and flexibility. Its virtually solvent free and has an A+ VOC emissions rating.Recommended areas of usePedestrian walkwaysColour coding and highlighting hazardous areasLine markingPlaygroundsTennis courtsPrivate asphalt drivewaysFeaturesAnti slip, flexible water based acrylicFine pre-blended grit offers slip resistance for pedestriansTransforms, dull, drab asphalt and tarmacExcellent resistance to UV and weatheringColours, protects and waterproofs with just one coatHigh pigment level offers excellent hiding powerBreathableVirtually solvent free and odourless safe to use inside as well as outsideSuitable for both asphalt and concreteSuperior performance demonstrated by ISO testing to CE Mark EN1504-2Drying Time Recoat Time Touch Dry Light Traffic Medium Traffic10C 16 hours 8 hours 48 hours 72 hours20C 6 hours 4 hours 24 hours 48 hours30C 3 hours 2 hour 12 hours 24 hoursLight Traffic: FootMedium Traffic: Cars, trolley, pallet truck

GBP 183.99
1

6x Watco Epoxy Gloss Coat Light Grey EGCBEFRAL7035

6x Watco Epoxy Gloss Coat Light Grey EGCBEFRAL7035

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1199.94
1

Watco Epoxy Gloss Coat Hygienic Light Grey

Watco Epoxy Gloss Coat Hygienic Light Grey

Images for illustration purposes onlyWatco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 259.99
1