giro imperial from GBP 0 | See the cheapest prices and offers on css.nordicadpartner.dk

Helix T32010 Ruler 18" Steel

This flexible stainless steel ruler from Helix features a non-slip cork backing to aid in precision work. Supplied in a wallet for scratch protection, and includes both imperial and metric measurements. Features and Benefits Durable stainless steel Non-slip cork backing for precision work Imperial and metric increments Supplied with wallet

GBP 15.99

1

Stainless Steel Ruler 30cm/300mm - 796900

Constructed from sturdy stainless steel, this ruler is ideal for precision measuring with craft knives and cutting mats as well as pens and pencils. The inclusion of both metric and imperial scales allows for measurement in millimetres, centimetres and inches. Ideal for use with craft knives and cutting mats Material: stainless steel Both metric and imperial markings Length:30cm

GBP 4.29

1

796900 Stainless Steel Ruler 30CM

Constructed from sturdy stainless steel, this ruler is ideal for precision measuring with craft knives and cutting mats as well as pens and pencils. The inclusion of both metric and imperial scales allows for measurement in millimetres, centimetres and inches. Features and Benefits Stainless steel - highly durable, shatterproof Inclusion of both metric and imperial scales Perfect for the home, workshop or office

GBP 3.69

1

Linex Heavy Duty Ruler 30cm Stainless Steel LXESL30

Linex Heavy Duty Rulers are made from stainless steel for extra durability and feature both metric and imperial measurements. A hole is punched into one end for easy storage and they are supplied in a handy sleeve. This 30cm ruler also features a measuring conversion table on the reverse. For everyday use Convenient conversion table on reverse Supplied in a tough storage wallet with reinforced hanging hole Material: stainless steel Both metric and imperial markings Length: 30cm

GBP 6.99

1

Linex Heavy Duty Ruler 100cm Stainless Steel LXESL100

Linex Heavy Duty Rulers are made from stainless steel for extra durability and feature both metric and imperial measurements. A hole is punched into one end for easy storage and they are supplied in a handy sleeve. This 100cm ruler also features a measuring conversion table on the reverse. For everyday use Convenient conversion table on reverse Supplied in a tough storage wallet with reinforced hanging hole Material: stainless steel Both metric and imperial markings Length: 100cm

GBP 0.00

1

Mitutoyo 182-105 6" x 150mm Rigid Rule

This Stainless Steel Rule is ideally suited for industrial use due to its robust nature. Measuring 12in./300mm in length, the product has both metric and imperial graduations and has a satin chrome finish. Features and Benefits Manufactured from durable stainless steel for product longevity Satin chrome finish provides an easy tool clean and protects the product from rust and corrosion Has both metric and imperial graduations to suit your preference Typical Applications DIY Plumbing Carpentry Construction

GBP 12.99

1

Mitutoyo 182-125 12" x 300mm Rigid Rule

This Stainless Steel Rule is ideally suited for industrial use due to its robust nature. Measuring 12in./300mm in length, the product has both metric and imperial graduations and has a satin chrome finish. Features and Benefits Manufactured from durable stainless steel for product longevity Satin chrome finish provides an easy tool clean and protects the product from rust and corrosion Has both metric and imperial graduations to suit your preference Typical Applications DIY Plumbing Carpentry Construction

GBP 25.99

1

T & A Precision Silver Steel 2" Diameter x 13" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 62.99

1

T & A Precision Silver Steel 1" Diameter x 13" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 16.99

1

T & A Precision Silver Steel 9/16" Diameter x 39" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 17.99

1

4x T & A Precision Silver Steel 15/16" Diameter x 13" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 63.96

1

T & A Precision Silver Steel 1.3/8" Diameter x 13" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 29.99

1

8x T & A Precision Silver Steel 23/32" Diameter x 13" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 87.92

1

T & A Precision Silver Steel 3/8" Diameter x 39" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 9.99

1

3x T & A Precision Silver Steel 1.1/8" Diameter x 39" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 170.97

1

T & A Precision Silver Steel 9/16" Diameter x 78" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 44.99

1

T & A Precision Silver Steel 5/32" Diameter x 39" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 2.49

1

T & A Precision Silver Steel 5/8" Diameter x 13" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 6.99

1

T & A Precision Silver Steel 7/8" Diameter x 13" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 12.99

1

18x T & A Precision Silver Steel 15/32" Diameter x 13" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 115.02

1

T & A Precision Silver Steel 21/32" Diameter x 13" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 8.99

1

T & A Precision Silver Steel 7/16" Diameter x 78" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 24.99

1

T & A Precision Silver Steel 3/4" Diameter x 78" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 55.99

1

T & A Precision Silver Steel 13/32" Diameter x 13" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 3.99

1

2x T & A Precision Silver Steel 1.1/4" Diameter x 39" Silver Steel

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs. Features and Benefits Comes machine ready to save you time preparing the material, you can get to work right away Manufactured from a high grade steel to allow you to harden your tool to an optimum level Supplied in a spheroidised annealed condition to allow you to begin work immediately Saves on material wastage as you can purchase the size that best suits your requirements Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs Typical Applications Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools Engineering Workshops Tool Manufacturing Standards BS1407:1970 Notes Chemical analysis: Carbon: Range: 0.95 - 1.25%. Typical: 1.13% Silicon: Range: 0.40% max. Typical: 0.22% Manganese: Range: 0.25 - 0.45%. Typical: 0.37% Phosphorous: Range: 0.045% max. Typical: 0.014% Sulphur: Range: 0.045% max. Typical: 0.018% Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

GBP 145.98

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Colour

Size

Merchant

Price (EUR)