motocaddy remote trolley from GBP 2 | See the cheapest prices and offers on css.nordicadpartner.dk

Kentec M24000 Remote Indicator Ceiling Clip for round version

Kentec M24000 Remote Indicator Ceiling Clip for round versionKentec have released a new and unique ceiling mounting clip which provides fast and secure fixing of their round Remote Indicator unit to ceilings.It is particularly good for fragile ceilings such as suspended ceilings.

GBP 3.43

1

C-Tec BF318 Remote LED Indicator Single Gang

C-Tec BF318 Remote LED Indicator Single GangThe BF318 is a high quality remote LED indicator specifically designed for use in fire alarm systems. It incorporates a high intensity wide-angle red LED which is clearly visible from the front of the plate when active. Its primary use is to indicate the activation of hidden or out of-sight fire detectors.Key FeaturesThe front label includes a white write on panel allowing installers to add their own personalised text such as equipment locationsThe unit will fit on 16mm deep flush or surface mount back boxes

GBP 4.00

1

Cranford Controls RIU-01 Blank Remote Indication Units

Cranford Controls RIU-01 Blank Remote Indication UnitsThe RIU unit is used to give a remote indication of the status of a single or groups of fire detectors in alarm state utilising an LED with a wide area of illumination and high onoff contrast. The units are compatible with the majority of conventional and addressable systems and can also be used for security and process control applications. The standard version is a single gang flush mount unit with or without Fire Detector Operated text and also available with a deep back box for surface mounting.Key Featuresdirect fit to a single gang deep back boxcircular flush mounted version available without texttext is available in other languagescustom legend available on requestIP66 weather-proof version availableVariants AvailablePart NumberDescription502-001Blank - Flush RIU-01502-002Blank - Surface RIU-01B

GBP 3.62

1

Vimpex 10-2011WFR-S Identifire Flush Remote Indicator Unit

Vimpex 10-2011WFR-S Identifire Flush Remote Indicator UnitThe 10-2011WFR-S is a bright LED indicator suitable for use on both conventional and analogue addressable alarm systems. Like all Identifire products this product is available as either flush or surface mounted.Key FeaturesVery bright easily visible LEDSuitable for use on both conventional and addressable alarm systemsOperating Voltage 5 - 28 V dcSuitable for use with both conventional and analogue addressable alarm systems

GBP 4.12

1

Cranford Controls RIU-02 Fire Detector Operated Remote Indication Units 502-003

Cranford Controls RIU-02 Fire Detector Operated Remote Indication Units502-003The RIU unit is used to give a remote indication of the status of a single or groups of fire detectors in alarm state utilising an LED with a wide area of illumination and high onoff contrast. The units are compatible with the majority of conventional and addressable systems and can also be used for security and process control applications. The standard version is a single gang flush mount unit with or without Fire Detector Operated text and also available with a deep back box for surface mountingKey FeaturesDirect fit to a single gang deep back boxcircular flush mounted version available without texttext is available in other languagescustom legend available on requestIP66 weather-proof version availableVariants AvailablePart NumberDescription502-003Fire Detector Operated text - Flush RIU-02502-004Fire Detector Operated text - Surface RIU-02B

GBP 3.62

1

Aritech Addressable 2000 Series Standard Base with 4 Terminals 100mm - DB2002

Aritech Addressable 2000 Series Standard Base with 4 Terminals 100mm - DB2002The DB2002 is a 100 mm wide five terminal base for all 2000 series detectors. Terminals are provided for communications remote indicator facilities as well as cable screen connections. The base has a built in detector locking mechanism and may be used for all 2000 series detectors.Key FeaturesSuitable for 2000 series sensorsWide 10cm base diameter4 terminals for loop and remote indicator output

GBP 4.25

1

Hochiki Standard Base YBN-R3 Ivory

Hochiki Standard Base YBN-R3 IvoryModel YBN-R3 is a Common Mounting Base which is fully compatible with Hochikis ESP sensors beacons base sounders and VADs.It is supplied with square cable clamps for secure and reliable cable termination and is also capable of driving a remote LED if required.Key FeaturesElectronics freeSupports the ESP SensorsStainless steel contactsTakes 2.5 mm cablesSlim profile - only 8 mmRugged wiring contactsFacility for remote indicatorQuick Connection via square cable clamps

GBP 2.28

1

Vimpex 10-8010RXX-S Identifire Back Box Red

Vimpex 10-8010RXX-S Identifire Back Box RedThe10-8010RXX-S is a red back box for the Vimpex Identifire Range of sounders beacons remote LEDs and relays.Key FeaturesColour Red

GBP 3.68

1

Hochiki Standard Mounting Base YBN-R3WHT White

Hochiki Standard Mounting Base YBN-R3WHT WhiteModel YBN-R3WHT is a Common Mounting Base which is fully compatible with Hochikis ESP range of sensors beacons base sounders and VADs. It is supplied with square cable clamps for secure and reliable cable termination and is also capable of driving a remote LED if required.Key FeaturesElectronics freeStainless steel contactsTakes 2.5 mm cablesSlim profile - only 8 mmRugged wiring contactsFacility for remote indicatorQuick Connection via square cable clampsAlso available in ivory and black

GBP 2.28

1

Hochiki Marine Sensor Mounting Base YBN-R3MWHT

Hochiki Marine Sensor Mounting Base YBN-R3MWHTModel YBN-R3M is a Common Mounting Base which is fully compatible with Hochikis Marine Approved ESP sensors. It is supplied with square cable clamps for secure and reliable cable termination and is also capable of driving a remote LED if requiredKey FeaturesElectronics freeSupports the ESP Marine Approved SensorsStainless steel contactsTakes 2.5 mm cablesSlim profile - only 8 mmRugged wiring contactsFacility for remote indicatorQuick Connection via square cable clampsApproved to MED by GL

GBP 3.49

1

Hochiki Marine Common Mounting Base YBN-R3M

Hochiki Marine Common Mounting Base YBN-R3MModel YBN-R3 is a Common Mounting Base which is fully compatible with Hochikis Marine Approved ESP sensors. It is supplied with square cable clamps for secure and reliable cable termination and is also capable of driving a remote LED if required.Key FeaturesElectronics freeSupports the ESP Marine Approved SensorsStainless steel contactsTakes 2.5 mm cablesSlim profile - only 8 mmRugged wiring contactsFacility for remote indicatorQuick Connection via square cable clampsApproved to MED by GL

GBP 3.49

1

Vimpex 10-8010WXX-S Identifire Back Box White

Vimpex 10-8010WXX-S Identifire Back Box WhiteThe10-8010WXX-S is a white back box which has been designed for use with the Vimpex Identifire Range of sounders beacons remote LEDs and relays.Key FeaturesColour White

GBP 3.52

1

Hochiki Sensor Mounting Base Black - YBN-R3BLK

Hochiki Sensor Mounting Base Black - YBN-R3BLKA Common Mounting Base which is fully compatible with ALK-ASN ACA-ASN and ACB-ASN sensors. Supplied with square cable clamps for secure and reliable cable termination and is also capable of driving a remote LED if required.Red version YBO-R3RED for use with CHQ-WS2 Wall Sounder and CHQ-WSB Wall Sounder BeaconColoursWhiteIvoryRedBlackKey FeaturesElectronics FreeStainless Steel ContactsTakes 2.5mm CablesSlim Profile - Only 8mmRugged Wiring ContactsFacility for Remote IndicatorQuick Connection Via Square Cable ClampsAvailable In RED For Use With CHQ-WS2 Wall Sounder CHQ-WSB Wall Sounder Beacon

GBP 4.02

1

Kidde KE-DB3010W Intelligent Addressable Detector Base White

Kidde KE-DB3010W Intelligent Addressable Detector Base WhiteA white base designed for use with Excellence series intelligent analogue detectors.Key FeaturesExcellence series smart detector standard baseIncludes an address label to label the device2-wire loop connectivity ground and remote indicatorCeiling mountingMaterial box PolycarbonateWhite Colour

GBP 3.72

1

Hochiki Conventional Standard Mounting Base YBN-R6 Ivory

Hochiki Conventional Standard Mounting Base YBN-R6 IvoryModel YBN-R6 is a Conventional Detector Mounting Base associated with the CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm control panels.It is supplied with square cable clamps for secure and reliable cable termination but the base does not provide line continuity during detector removal therefore if Call Points are being used then these should be wired onto the zone first. The integrated third terminal provides remote indicator output.Key FeaturesIntegral remote indicator outputLow Profile only 8 mmRugged design and electronics freeQuick connections via square cable clampsAccepts 2.5 mm cablesBayonet slot low insertion force for detectorsAlso available in white or black

GBP 2.18

1

Hochiki YBN-R6BLK Conventional Mounting Base Black

Hochiki YBN-R6BLK Conventional Mounting Base BlackModel YBN-R6BLK is a Conventional Detector Mounting Base associated with the CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm control panels. It is supplied with square cable clamps for secure and reliable cable termination but the base does not provide line continuity during detector removal therefore if Call Points are being used then these should be wired onto the zone first. The integrated third terminal provides remote indicator output.Key FeaturesIntegral remote indicator outputLow Profile only 8 mmRugged design and electronics freeQuick connections via square cable clampsAccepts 2.5 mm cablesBayonet slot low insertion force for detectorsAlso available in white or ivory

GBP 4.36

1

Hochiki Conventional White Mounting Base YBN-R6WHT

Hochiki Conventional White Mounting Base YBN-R6WHTModel YBN-R6WHT is a Conventional Detector Mounting Base associated with the CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm control panels.It is supplied with square cable clamps for secure and reliable cable termination but the base does not provide line continuity during detector removal therefore if Call Points are being used then these should be wired onto the zone first. The integrated third terminal provides remote indicator output.Key FeaturesIntegral remote indicator outputLow Profile only 8 mmRugged design and electronics freeQuick connections via square cable clampsAccepts 2.5 mm cablesBayonet slot low insertion force for detectorsAlso available in ivory or black

GBP 2.18

1

Hochiki Conventional Schottky Base YBN-R6SKWHT White

Hochiki Conventional Schottky Base YBN-R6SKWHT WhiteModel YBN-R6SKWHT is a Conventional Detector Mounting Base with in-line Schottky Diode associated with the CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm control panels.It is supplied with square cable clamps for secure and reliable cable termination and the base provides line continuity during detector removal. Therefore Call Points can be wired in any order on the zone providing a suitable panel and End Of Line EOL unit is used. The integrated third terminal provides remote indicator output.Key FeaturesIntegral remote indicator outputIn-line Schottky Diode for line continuityLow profile only 8mmRugged designQuick connections via square cable clampsAccepts 2.5mm cablesBayonet slot low insertion force for detectorsApproved by LPCB

GBP 3.24

1

Hochiki Conventional Schottky Base YBN-R6SK Ivory

Hochiki Conventional Schottky Base YBN-R6SK IvoryModel YBN-R6SK is a Conventional Detector Mounting Base with in-line Schottky Diode associated with the CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm control panels.It is supplied with square cable clamps for secure and reliable cable termination and the base provides line continuity during detector removal. Therefore Call Points can be wired in any order on the zone providing a suitable panel and End Of Line EOL unit is used. The integrated third terminal provides remote indicator output.Key FeaturesIntegral remote indicator outputIn-line Schottky Diode for Line ContinuityLow Profile only 8 mmRugged designQuick connections via square cable clampsAccepts 2.5 mm cablesBayonet slot low insertion force for detectors

GBP 3.24

1

Apollo Series 65 Marine Mounting Base 45681-200MAR

Apollo Series 65 Marine Mounting Base 45681-200MARThe Base has been designed to enable detectors to be fitted without the need of force - particularly useful when fitting to suspended ceilings. All Series 65 bases have a one way only fit. Detectors can be locked into place by a grub screw using a 1.5mm hexagonal screwdriver.OperationThe bases are of 100mm diameter and have five terminals marked according to their function Line 1 in line 1 out line 2 in and out remote indicator negative earth. Detectors are polarity insensitive so that identification of positive and negative lines is only required if a remote LED is fitted. An earth connection is not required for either safety or correct operation of detectors.The earth terminal is provided for tidy termination of earthed conductors or cable screens and to maintain earth continuity where necessary. Bases have a wide interior diameter for ease of access to cables and terminals and there are two slots for fixing screws at a spacing of 51 to 69mm. Detectors fit into bases one way only and require clockwise rotation without push force to be plugged in.Key FeaturesDetector locking mechanismOne way fitEasy to wireContains an earth connectorContains no electrical partsTerminal for remote indicator

GBP 3.86

1

Apollo Series 65 Standard Base - 45681-200APO

Apollo Series 65 Standard Base - 45681-200The Series 65 Standard Base has been designed to enable detectors to be fitted without the need of force - particularly useful when fitting to suspended ceilings. All Series 65 bases have a one way only fit. Detectors can be locked into place by a grub screw using a 1.5mm hexagonal screwdriver.OperationAll detectors in the Series 65 range fit into Series 60 standard mounting bases. The bases are of 100mm diameter and have five terminals marked according to their function Line 1 in line 1 out line 2 in and out remote indicator negative earth. Detectors are polarity insensitive so that identification of positive and negative lines is only required if a remote LED is fitted. An earth connection is not required for either safety or correct operation of detectors.The earth terminal is provided for tidy termination of earthed conductors or cable screens and to maintain earth continuity where necessary. Bases have a wide interior diameter for ease of access to cables and terminals and there are two slots for fixing screws at a spacing of 51 to 69mm. Detectors fit into bases one way only and require clockwise rotation without push force to be plugged in.Key Features Detector locking mechanismOne way fitEasy to wireContains an earth connectorContains no electrical partsTerminal for remote indicator

GBP 2.51

1

NC-DB-W Conventional Detector Accessory - Base White

NC-DB-W Conventional Detector Accessory - Base WhiteThe NC-DB-W is an NC series surface mount first-fix base. Itallows any NC Series conventional point detector to be inserted removed orreplaced without rewiring using an easy twist and lock action. There are noelectrical components in the base.The NC-DB-W supports a remote indicator connection.Ease of InstallationForming an integral part of the detector assembly NC Seriesstandard bases are provided with key-hole slots for screw fixing direct toceiling structures or conduit boxes. Large rear cable entry allows for easywiring to the base.For special applications a base accessory is available forsurface installations ensuring an easy and practical installation.Ease of Wiring TestingClearly marked terminals ensure correct and secure wiringtermination for zone and remote indicator connections.Ease of UseInserting the NC Series detector into the base is accomplishedwith a simple turn and lock mechanism. To prevent unauthorised removal of adetector from its base an easy-to-activate locking mechanism is incorporatedinto all NC series detectors. If activated a detector can only be releasedfrom its base using a dedicated tool.Key FeaturesCommon first-fix mounting base for all white NC-SeriesdetectorsA selectable detector locking mechanism protects againstunauthorised removalLarge rear cable entry with ample space for cablesFlexible installation fixture with first fix screw featurereduces installation time and effortClearly visible terminal marking avoids incorrect cablingRobust wiring terminals for easy installationSimple twist-and-lock detector action ensures the detectoris properly insertedDual contact points on every connector forreliable detectorbase contact

GBP 3.43

1

Apollo Series 65 Diode Base 45681-201APO

Apollo Series 65 Diode Base 45681-201The Series 65 Diode Base is designed for use with conventional systems that have manual call points and detector bases on the same circuit. The base is fitted with a schottky diode on the L1 IN and L1 OUT wiring terminals.This base can only be used with compatible control equipment.OperationAll detectors in the Series 65 range fit into Series 60 standard mounting bases. The bases are of 100mm diameter and have five terminals marked according to their function Line 1 in line 1 out line 2 in and out remote indicator negative earth. Detectors are polarity insensitive so that identification of positive and negative lines is only required if a remote LED is fitted. An earth connection is not required for either safety or correct operation of detectors.The earth terminal is provided for tidy termination of earthed conductors or cable screens and to maintain earth continuity where necessary. Bases have a wide interior diameter for ease of access to cables and terminals and there are two slots for fixing screws at a spacing of 51 to 69mm. Detectors fit into bases one way only and require clockwise rotation without push force to be plugged in.Key FeaturesDetector locking mechanismOne way fitEasy to wireContains an earth connectorContinues to work during unauthorised removal of detectorsBrand FeaturesWide-operating voltage of 933 V DCWide-operating and storage temperature of -20C to 60CCan be used on security systemsElectrically and mechanically compatible with Series 60Proven detection performance

GBP 2.60

1

Detector Base For HFI Range HFI-DMBS-05

Detector Base For HFI RangeThe HFI-DMBS-05 is a detector base for the HFI Hyfire range.The HFI-DMBS-05 standard intelligent low profile mounting base has been designed for use with any of the Altair point type intelligent detector range. The bases layout allows plenty of space for cable access and has multiple mounting-hole positions for use with a variety of back boxes. The unit has terminations for loop wiring remote indicator connection and termination of shield cabling. When no device is fitted into the base an automatic spring connection maintains loop continuity ready for loop cable testing. Once the device is refitted the spring is displaced allowing the loop isolators to operate.Key FeaturesHigh reliabilityCompatible with all Altair detectorsDevice locking capabilityEasy central cable entryIntegral device identification tabRemote indicator connectionsBuilt-in continuity spring5 year product warranty

GBP 2.90

1

C-Tec CA408 CA Detector Base

C-Tec CA408 CA Detector BaseThe C-Tec CA408 is a detector base which has been designed for use with the CAST protocol range of analogue addressable fire alarm system detectors. It can be ceiling mounted in any orientation due to the true 360 degree viewing angle of the LED indicator strips on all CAST detectors.Key FeaturesCompatible with C-TECs entire range of CAST addressable detectorsThird-party LPCB certified to the relevant parts of EN54 in conjunction with our CAST detectorsEasy to fit with lots of working spaceCan be ceiling mounted in any orientation due to the true 360 degree viewing angle of the LED indicator strips on all CAST detectorsIntegrated detectorbase locking mechanism head removal tool and ID tagSimple click and twist designAlso compatible with many of C-TECs CAST protocol sounder VADsRemote LED terminals for the optional connection to a BF318 Remote indicatorOptional CA408R relay base also available

GBP 3.07

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)