new balance foam hierro v6 gtx from GBP 10 | See the cheapest prices and offers on css.nordicadpartner.dk

STI STI-1401 Foam Gasket For Enclosed Flush Backbox 13300 Series

STI STI-1401 Foam Gasket For Enclosed Flush Backbox 13300 SeriesA replacement foam gasket designed for use with the STI Enclosed Flush Backbox 13300 series.

GBP 11.12

1

Commander 6 Litre Foam Refill Pack RP18

Commander 6 Litre Foam Refill PackRP18We supply a wide range of refills for extinguishers which come in a variety of different solutions for different extinguisher ranges and sizes. The RP18 is a 6 litre refill for Foam extinguishers which are used to tackle Class A B fires.Key FeaturesCapacity 6 LitreClass A Fires - Wood paper textiles and other carbonaceous materialsClass B Fires - Flammable liquids petrols spirits

GBP 12.60

1

Commander 9 Litre Foam Refill Pack RP19

Commander 9 Litre Foam Refill PackRP19We supply a wide range of refills for extinguishers which come in a variety of different solutions for different extinguisher ranges and sizes.Key FeaturesCapacity 9 LitreClass A Fires - Wood paper textiles and other carbonaceous materialsClass B Fires - Flammable liquids petrols spirits

GBP 13.55

1

2 Litre Foam Extinguisher CommanderEDGE FS2E

2 Litre Foam Extinguisher CommanderEDGE FS2EFoam extinguishers are always an excellent choice for Class A and B fires. The increasingly popular 6 litre model combines light weight compact design and a 13A144B fire rating. Class A fires consist of those which include textiles wood paper and carbonaceous materials. Class B fires consist of those which include flammable liquids such as petrol spirits.Key FeaturesKitemarked to BS EN3Corrosion-resistant finishPlastic base skirt for protectionPolyethylene internal liningFull range of spare parts availableGuaranteed for 5 years WarrantyFire Extinguisher Used ForClass A Fires - Wood paper textiles and other carbonaceous materials.Class B Fires - Flammable liquids petrols spirits.We also have a huge range of Fire Extinguishers available.

GBP 14.99

1

1 Litre Commander AFFF Foam Extinguisher FSEX1

1 Litre Commander AFFF Foam ExtinguisherFSEX1Foam is always an excellent choice for Class A and B fires. Class A are fires which include those which are involving textiles wood paper and carbonaceous materials Class B fires are those which are including flammable liquids such as petrol and spirits. The increasingly popular 6 litre model combines light weight compact design and a 13A113B fire rating. The 1 litre and 2 litre models are supplied with sturdy transport brackets.Key FeaturesFully CE markedManufactured to BS EN3Fire rating certified by Lloyds RegisterPlastic base for protection excludes 1 2 ltrCorrosion-resistant finishPolyethylene internal liningFull range of spare parts available5 Year WarrantyFire Extinguisher Used ForClass A Fires - Wood paper textiles carbonaceous materialsClass B Fires - Flammable liquids petrols spirits

GBP 15.05

1

Conventional Deep Base with Schottky Diode - 2020DBSD

Conventional Deep Base with Schottky Diode - 2020DBSDThere are 4 new bases from the new range of Gent conventional fire alarm equipment2020B Standard Base adds 9.5mm to detector height2020BSD Standard Base with Schottky diode2020DB Deep Base adds 21mm to detector height2020DBSD Deep Base with Schottky diodeThe base is compatible with the following2020PT Multi-Function Detector2020P Optical Smoke Detector2020R Rate of Rise Heat Detector2020F 58 Celsius Fixed Temperature Heat Detector2020HF 70 Celsius Fixed Temperature Heat Detector

GBP 9.64

1

Ziton Flush Mount Call Point 560ohm with Glass and LED DMN700L

Please note This item is being phased out we have limited stockavailable.Ziton Flush Mount Call Point 560ohm with Glass and LED DMN700LInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.InstallationInstallation time and ultimately cost are of paramount importance. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Options and approvalsThrough new standards and legislation both break glass and re-settable operating elements may now be used. To provide the greatest flex-ability the new MCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products are required.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standardKey FeaturesEnhanced aestheticsEasy to install plug and playSurface mount optionsProtection hinged cover with Anti-Tamper facilityBackward compatibleKey test facilityMay be used with glass or resettable elementEasy to replace glassHigh quality micro switchFully approved to the latest standards

GBP 12.97

1

2KG CO2 Transport Bracket CD2TB

2KG CO2 Transport Bracket CD2TBThis is a 2KG CO2 transport bracket which is from a range of transport vehicle bracket to suit extinguishers from 2Kg and 5Kg CO2up to 9L9Kg for Water Foam and Powder.Key FeaturesSolid steel constructionSupplied with rubber sheaths to protect the extinguisher from damage during transportationIncludes adjustable nylon straps with plastic clips to ensure a safe fit to the extinguisherHeight 155mmWeight 128mmDepth 45mm

GBP 10.46

1

Fireclass Red Deep Surface Back Box

Fireclass Red Deep Surface Back BoxRed Deep surface back box designed for use with the new range of Fireclass indoor wall Sounders VADs and VIDs. Must be ordered with the below.Compatible withFC440SRFC440AVRFC440AIR

GBP 11.08

1

Kidde KE-DBA-ADPW-ZIT Intelligent Addressable Base Accessory - Ziton Adapter White

Kidde KE-DBA-ADPW-ZIT Intelligent Addressable Base Accessory - Ziton Adapter WhiteThe KE-DBA-ADPW-ZIT is an Excellence series base adapter. It allows easy migration form a legacy Ziton ZP7 series installation by offering the possibility to keep the legacy standard base installation intact but convert to the new Excellence series intelligent detectors.Standard BaseThe adapter base is designed to enable the new Excellence series detectors to be plugged in without any need for force - particularly useful when fitting to suspended ceilings. To make it even easier the base has a one way only fit.The adapter base contains no electronic parts that could be damaged during installation. It automatically locks into the legacy standard base just like fitting a detector The adapter also supports the option to lock the Excellence series detector in place to avoid unauthorised detector removal.As with all Excellence series standard bases the Excellence series base adapter supports Excellence series address tags for neat product identification labelling.Key FeaturesAllows the reuse of legacy Ziton ZP7 standard bases without installation modification in systems upgrading to the new intelligent Excellence series detectorsAutomatic locking to legacy base avoids adapter removal when the new detector is removedSupports the Excellence detector base locking option to prevent unauthorised removal of the Excellence series detectorStandard Excellence series base already integratedHides the legacy base for perfect colour matching to the new Excellence series detectorSupports Excellence series address tags for neat labelling and device identificationEN54 approved with the Excellence series detectors

GBP 11.21

1

KAC MCP1A-R-470-SR-IS Red Intrinsically Safe Call Point - Surface - 470Ohm

KAC MCP1A-R-470-SR-IS Red Intrinsically Safe Call Point - Surface - 470OhmThe MCP1A-R-470-SR-IS is a Red Intrinsically Safe Call Point.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options.Key FeaturesColour Red470OhmUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibility

GBP 14.01

1

KAC MCP1A-Y-AOV Yellow Smoke Vent Manual Call Point - 470OHM Resettable

KAC MCP1A-Y-AOV Yellow Smoke Vent Manual Call Point - 470OHM ResettableThe MCP1A-Y-AOV is a Yellow Smoke Vent Manual Call Point designed for use with the KAC Automatic Opening Vent Control Systems.There are manual override switches which are used to open and close smoke systems and can be used alongside KAC smoke control panels. This unit is supplied with a resettable non-glass element which allows the call point to be reset much quicker than conventional glass elements.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.Key FeaturesColour YellowLabelled Smoke VentSuitable for use with KAC AOV control panels

GBP 16.20

1

KAC M2A-R470SG-K013-01 Red Break Glass Call Point with LED - 470 Ohm Surface

KAC M2A-R470SG-K013-01 Red Break Glass Call Point with LED - 470 Ohm SurfaceInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.All MCP2 products are supplied with an LED indicator as standard.The MCP2A Product version is supplied with both an LEDresistor and normally open clean contact electrical options. These options are simply utilised by attaching the terminal block to the required connection in the back of the MCP product.Key FeaturesColour Red470OhmUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 14.22

1

KAC MCP1A-R-470-SR-R Red Manual Call Point - 470 Ohm Surface - Resettable

KAC MCP1A-R-470-SR-R Red Manual Call Point - 470 Ohm Surface - ResettableThe MCP1A-R-470-SR-R is a Red Resettable Manual Call Point.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options.Key FeaturesColour Red470OhmResettableUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 11.15

1

KAC M1A-R680SG-STCK-01 Red Break Glass Call Point - 680Ohm - Surface - House Flame

KAC M1A-R680SG-STCK-01 Red Break Glass Call Point - 680Ohm - Surface - House FlameThe M1A-R680SG-STCK-01 is a Red Break Glass Call Point.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options.Key FeaturesColour Red680OhmUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 13.44

1

Aritech ACT745-37 HID Proxkey III - Sitecode 37

Aritech ACT745-37 HID Proxkey III - Sitecode 37The new ProxKey III Proximity Keyfob incorporates proximity technology into a device approximately the size of an automotive key. Small and convenient the Keyfob is always there when you need it on your key ring.HIDs advanced technology allows the Keyfob to be programmed with up to 37 bits of Wiegand formatted information for universal compatibility with all Wiegand reader applications. The new keyfob can accommodate an external number for easy identification and control.Key FeaturesOffers universal compatibility with all HID proximity readersCan be placed on a key ring for convenient entryProvides an external number for easy identification and controlHID standard 32-bit configuration

GBP 10.20

1

KAC M3A-R000SF-STCK-01 Red NONC Contact Model Surface Flexi Element Indoor Manual Call Point With House Flame Marking

KAC M3A-R000SF-STCK-01 Red NONC Contact Model Surface Flexi Element Indoor Manual Call Point With House Flame MarkingInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocks.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standards

GBP 14.58

1

KAC M3A-R000SG-K013-81 Red Indoor Manual Call Point With House Flame Marking - Normally OpenNormally Close NONC- Surface - Break Glass

KAC M3A-R000SG-K013-81 Red Indoor Manual Call Point With House Flame Marking - Normally OpenNormally Close NONC- Surface - Break GlassInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocks.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 16.99

1

KAC M3A-R000SG-STCK-01 Red Break Glass Call Point - NONC Surface - House Flame

KAC M3A-R000SG-STCK-01 Red Break Glass Call Point - NONC Surface - House FlameInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocks.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 12.05

1

KAC M3A-Y000FG-K013-54 Yellow NONC Contact Model Flush Glass Indoor Manual Call Point Extinguishant Release Marking And Hinge Cover

KAC M3A-Y000FG-K013-54 Yellow NONC Contact Model Flush Glass Indoor Manual Call Point Extinguishant Release Marking And Hinge CoverInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocks.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standards

GBP 16.90

1

Zeta MKII-HFCS90 MKII Fixed High Heat Detector CS

Zeta MKII-HFCS90 MKII Fixed High Heat Detector CSThe Fyreye MkII optical smoke detectors use a pulsing IR LED photodiode to detect IR scatter caused by smoke entering the chamber. The detector is particularly suitable for detecting optically dense smoke involving materials such as soft furnishings PVC plastic foam and all similar materials which produce small visible particles 0.5 to 10m.The Fyreye fixed heat detector MKII-HFCS90 gives an alarm above 86C.Key FeaturesDesigned to meet EN54 requirementLockable to base to stop unauthorised removalRemote LED outputCompatible with all Fyreye MkII bases

GBP 15.47

1

Zeta MKII-HF MKII Fixed Heat Detector

Zeta MKII-HF MKII Fixed Heat DetectorThe Fyreye MkII optical smoke detectors use a pulsing IR LED photodiode to detect IR scatter caused by smoke entering the chamber.The detector is particularly suitable for detecting optically dense smoke involving materials such as soft furnishings PVC plastic foam and all similar materials which produce small visible particles.The Fyreye fixed heat detector MKII-HF has a single thermistor arrangement that gives an alarm at a temperature of 57C.Key FeaturesDesigned to meet EN54 requirementLockable to base to stop unauthorised removalRemote LED outputCompatible with all Fyreye bases

GBP 14.44

1

KAC M3A-GC01SF-K013-12 Single Pole Changeover Contact Call Point - Green

KAC M3A-GC01SF-K013-12 Single Pole Changeover Contact Call Point - GreenInstallation efficiency and flexibility are at the heart of the new MCP Indoor Call Pointrange.Installation time and ultimately cost are of paramount importance to any fire or securityinstaller. The MCP range directly reflects this need by providing a unique plug and playconcept designed specifically to reduce installation time. All new MCP products utilisea special terminal block where all initial installation cabling is terminated. This terminalblock is then simply connected to the back of the MCP. Simple but effective with nore-termination required and no time wasted.Both break glass and resettable operating elements can now be used within a manualcall point. To provide you with the greatest flex-ability the new MCP range can beconfigured as either a break glass or resettable unit by simply changing from one elementto another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall systemas illegal removal of the product lid will result in the call point operating and the systemgoing in to alarm.Key FeaturesColour Green

GBP 13.97

1

Zeta MKII-OP MKII Optical Smoke Detector

Zeta MKII-OP MKII Optical Smoke DetectorThe Fyreye MKII optical smoke detectors use a pulsing IR LED photodiode to detect IR scatter caused by smoke entering the chamber.The detector is particularly suitable for detecting optically dense smoke involving materials such as soft furnishings PVC plastic foam and all similar materials which produce small visible particles 0.5 to 10m.The detector will work with most modern fire alarm control panels and comes supplied with a locking grub screw to prevent unauthorised head removal.Key FeaturesCertified to meet EN54 requirementLockable to base to stop unauthorised removalRemote LED outputCompatible with all Fyreye bases

GBP 16.84

1

Ziton Flush Call Point Free Contact with Glass DMN700-SW

Ziton Flush Call Point Free Contact with Glass DMN700-SWThe DMN700-SW is a red manual call point for flush mount applications. It offers a single pole changeover contact with common normally open and normally closed connections. It is supplied with a EN54 breakable glass and test key. Surface mount applications require the addition of the DM788 or DMN787.InstallationInstallation time and ultimately cost are of paramount importance. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.OptionsThrough new standards and legislation both break glass and re-settable operating elements may now be used. To provide the greatest flex-ability the new MCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products are required.Key FeaturesEnhanced aestheticsEasy to install plug and playSurface mount optionsProtection hinged cover with Anti-Tamper facilityBackward compatibaleKey test facilityMay be used with glass or resettable elementEasy to replace glassHigh quality micro switch

GBP 10.25

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)