new wilson driver from GBP 10 | See the cheapest prices and offers on css.nordicadpartner.dk

STI STI-TT001-A Tamper Driver Bit 4mm Head Security Pin-In-Hex

STI STI-TT001-A Tamper Driver Bit 4mm Head Security Pin-In-HexA tamper driver bit.Key Features4mm headSecurity pin-in-hex

GBP 14.48

1

STI KIT-19038 Tamper Driver BitHex 4.0 Solid

STI KIT-19038 Tamper Driver BitHex 4.0 SolidSnake eye bit for use with KIT-81 KIT-82 and KIT-84 tamper resistant screws.

GBP 14.50

1

STI KIT-6702 Tamperproof Screw amp Wrench Kit

STI KIT-6702 Tamperproof Screw Wrench KitTamper screw and screw driver with unique head used to mountinto the bottom of a Break Glass cover and secure cover to the frame.

GBP 11.18

1

Conventional Deep Base with Schottky Diode - 2020DBSD

Conventional Deep Base with Schottky Diode - 2020DBSDThere are 4 new bases from the new range of Gent conventional fire alarm equipment2020B Standard Base adds 9.5mm to detector height2020BSD Standard Base with Schottky diode2020DB Deep Base adds 21mm to detector height2020DBSD Deep Base with Schottky diodeThe base is compatible with the following2020PT Multi-Function Detector2020P Optical Smoke Detector2020R Rate of Rise Heat Detector2020F 58 Celsius Fixed Temperature Heat Detector2020HF 70 Celsius Fixed Temperature Heat Detector

GBP 9.64

1

Ziton Flush Mount Call Point 560ohm with Glass and LED DMN700L

Please note This item is being phased out we have limited stockavailable.Ziton Flush Mount Call Point 560ohm with Glass and LED DMN700LInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.InstallationInstallation time and ultimately cost are of paramount importance. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Options and approvalsThrough new standards and legislation both break glass and re-settable operating elements may now be used. To provide the greatest flex-ability the new MCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products are required.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standardKey FeaturesEnhanced aestheticsEasy to install plug and playSurface mount optionsProtection hinged cover with Anti-Tamper facilityBackward compatibleKey test facilityMay be used with glass or resettable elementEasy to replace glassHigh quality micro switchFully approved to the latest standards

GBP 12.97

1

Fireclass Red Deep Surface Back Box

Fireclass Red Deep Surface Back BoxRed Deep surface back box designed for use with the new range of Fireclass indoor wall Sounders VADs and VIDs. Must be ordered with the below.Compatible withFC440SRFC440AVRFC440AIR

GBP 11.08

1

Kidde KE-DBA-ADPW-ZIT Intelligent Addressable Base Accessory - Ziton Adapter White

Kidde KE-DBA-ADPW-ZIT Intelligent Addressable Base Accessory - Ziton Adapter WhiteThe KE-DBA-ADPW-ZIT is an Excellence series base adapter. It allows easy migration form a legacy Ziton ZP7 series installation by offering the possibility to keep the legacy standard base installation intact but convert to the new Excellence series intelligent detectors.Standard BaseThe adapter base is designed to enable the new Excellence series detectors to be plugged in without any need for force - particularly useful when fitting to suspended ceilings. To make it even easier the base has a one way only fit.The adapter base contains no electronic parts that could be damaged during installation. It automatically locks into the legacy standard base just like fitting a detector The adapter also supports the option to lock the Excellence series detector in place to avoid unauthorised detector removal.As with all Excellence series standard bases the Excellence series base adapter supports Excellence series address tags for neat product identification labelling.Key FeaturesAllows the reuse of legacy Ziton ZP7 standard bases without installation modification in systems upgrading to the new intelligent Excellence series detectorsAutomatic locking to legacy base avoids adapter removal when the new detector is removedSupports the Excellence detector base locking option to prevent unauthorised removal of the Excellence series detectorStandard Excellence series base already integratedHides the legacy base for perfect colour matching to the new Excellence series detectorSupports Excellence series address tags for neat labelling and device identificationEN54 approved with the Excellence series detectors

GBP 11.21

1

KAC MCP1A-R-470-SR-IS Red Intrinsically Safe Call Point - Surface - 470Ohm

KAC MCP1A-R-470-SR-IS Red Intrinsically Safe Call Point - Surface - 470OhmThe MCP1A-R-470-SR-IS is a Red Intrinsically Safe Call Point.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options.Key FeaturesColour Red470OhmUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibility

GBP 14.01

1

KAC MCP1A-Y-AOV Yellow Smoke Vent Manual Call Point - 470OHM Resettable

KAC MCP1A-Y-AOV Yellow Smoke Vent Manual Call Point - 470OHM ResettableThe MCP1A-Y-AOV is a Yellow Smoke Vent Manual Call Point designed for use with the KAC Automatic Opening Vent Control Systems.There are manual override switches which are used to open and close smoke systems and can be used alongside KAC smoke control panels. This unit is supplied with a resettable non-glass element which allows the call point to be reset much quicker than conventional glass elements.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.Key FeaturesColour YellowLabelled Smoke VentSuitable for use with KAC AOV control panels

GBP 16.20

1

KAC MCP1A-R-470-SR-R Red Manual Call Point - 470 Ohm Surface - Resettable

KAC MCP1A-R-470-SR-R Red Manual Call Point - 470 Ohm Surface - ResettableThe MCP1A-R-470-SR-R is a Red Resettable Manual Call Point.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options.Key FeaturesColour Red470OhmResettableUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 11.15

1

KAC M1A-R680SG-STCK-01 Red Break Glass Call Point - 680Ohm - Surface - House Flame

KAC M1A-R680SG-STCK-01 Red Break Glass Call Point - 680Ohm - Surface - House FlameThe M1A-R680SG-STCK-01 is a Red Break Glass Call Point.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options.Key FeaturesColour Red680OhmUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 13.44

1

KAC M2A-R470SG-K013-01 Red Break Glass Call Point with LED - 470 Ohm Surface

KAC M2A-R470SG-K013-01 Red Break Glass Call Point with LED - 470 Ohm SurfaceInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.All MCP2 products are supplied with an LED indicator as standard.The MCP2A Product version is supplied with both an LEDresistor and normally open clean contact electrical options. These options are simply utilised by attaching the terminal block to the required connection in the back of the MCP product.Key FeaturesColour Red470OhmUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 14.22

1

Aritech ACT745-37 HID Proxkey III - Sitecode 37

Aritech ACT745-37 HID Proxkey III - Sitecode 37The new ProxKey III Proximity Keyfob incorporates proximity technology into a device approximately the size of an automotive key. Small and convenient the Keyfob is always there when you need it on your key ring.HIDs advanced technology allows the Keyfob to be programmed with up to 37 bits of Wiegand formatted information for universal compatibility with all Wiegand reader applications. The new keyfob can accommodate an external number for easy identification and control.Key FeaturesOffers universal compatibility with all HID proximity readersCan be placed on a key ring for convenient entryProvides an external number for easy identification and controlHID standard 32-bit configuration

GBP 10.20

1

KAC M3A-R000SG-K013-81 Red Indoor Manual Call Point With House Flame Marking - Normally OpenNormally Close NONC- Surface - Break Glass

KAC M3A-R000SG-K013-81 Red Indoor Manual Call Point With House Flame Marking - Normally OpenNormally Close NONC- Surface - Break GlassInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocks.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 16.99

1

KAC M3A-R000SG-STCK-01 Red Break Glass Call Point - NONC Surface - House Flame

KAC M3A-R000SG-STCK-01 Red Break Glass Call Point - NONC Surface - House FlameInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocks.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 12.05

1

KAC M3A-Y000FG-K013-54 Yellow NONC Contact Model Flush Glass Indoor Manual Call Point Extinguishant Release Marking And Hinge Cover

KAC M3A-Y000FG-K013-54 Yellow NONC Contact Model Flush Glass Indoor Manual Call Point Extinguishant Release Marking And Hinge CoverInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocks.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standards

GBP 16.90

1

KAC M3A-R000SF-STCK-01 Red NONC Contact Model Surface Flexi Element Indoor Manual Call Point With House Flame Marking

KAC M3A-R000SF-STCK-01 Red NONC Contact Model Surface Flexi Element Indoor Manual Call Point With House Flame MarkingInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocks.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standards

GBP 14.58

1

KAC M3A-GC01SF-K013-12 Single Pole Changeover Contact Call Point - Green

KAC M3A-GC01SF-K013-12 Single Pole Changeover Contact Call Point - GreenInstallation efficiency and flexibility are at the heart of the new MCP Indoor Call Pointrange.Installation time and ultimately cost are of paramount importance to any fire or securityinstaller. The MCP range directly reflects this need by providing a unique plug and playconcept designed specifically to reduce installation time. All new MCP products utilisea special terminal block where all initial installation cabling is terminated. This terminalblock is then simply connected to the back of the MCP. Simple but effective with nore-termination required and no time wasted.Both break glass and resettable operating elements can now be used within a manualcall point. To provide you with the greatest flex-ability the new MCP range can beconfigured as either a break glass or resettable unit by simply changing from one elementto another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall systemas illegal removal of the product lid will result in the call point operating and the systemgoing in to alarm.Key FeaturesColour Green

GBP 13.97

1

Ziton Flush Call Point Free Contact with Glass DMN700-SW

Ziton Flush Call Point Free Contact with Glass DMN700-SWThe DMN700-SW is a red manual call point for flush mount applications. It offers a single pole changeover contact with common normally open and normally closed connections. It is supplied with a EN54 breakable glass and test key. Surface mount applications require the addition of the DM788 or DMN787.InstallationInstallation time and ultimately cost are of paramount importance. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.OptionsThrough new standards and legislation both break glass and re-settable operating elements may now be used. To provide the greatest flex-ability the new MCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products are required.Key FeaturesEnhanced aestheticsEasy to install plug and playSurface mount optionsProtection hinged cover with Anti-Tamper facilityBackward compatibaleKey test facilityMay be used with glass or resettable elementEasy to replace glassHigh quality micro switch

GBP 10.25

1

KAC M1A-R470SG-K013-81 Red Intrinsically Safe Break Glass Indoor Manual Call Point House Flame Logo

KAC M1A-R470SG-K013-81 Red Intrinsically Safe Break Glass Indoor Manual Call Point House Flame LogoThese Intrinsically Safe version of call points are manufactured to protect against other hazards as defined in paragraph 1.2.7 of annex II of the ATEX Directive 949EC. They are intended for use within Intrinsically Safe I.S. systems using suitable I.S. barriers. For a list of suitable barriers see reverse.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new Indoor Call Point range. Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options. These options are easily utilised by simply connecting the terminal block to the required connection in the back of the MCP1 product. A variety of resistor versions are available with both 470W and 680W offered as standard. However other resistor types can be provided upon request. The MCP1B product version allows for connection to Savwire systems.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibility

GBP 16.99

1

KAC M1A-B470SF-K013-11 Blue Break Glass Call Point - 470 Ohm Surface - Resettable

KAC M1A-B470SF-K013-11 Blue Break Glass Call Point - 470 Ohm Surface - ResettableThe M1A-B470SF-K013-11 is a resettable Blue Break Glass Call Point.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP Indoor Call Point range. Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options. These options are easily utilised by simply connecting the terminal block to the required connection in the back of the MCP1 product. A variety of resistor versions are available with both 470W and 680W offered as standard. However other resistor types can be provided upon request.Key FeaturesColour BlueResettableUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityPlease note The image is for illustative purposes only.

GBP 17.18

1

Professional Engineer Call Point Test Key Set

Professional Engineer Call Point Test Key SetThe call point key set is an essential must have for every fire alarm engineer on site who work alongside a wide variety of call points so you wont be left in the dark on that all-important job. Our key set has been designed to include the most common call point test keys used in a wide range of different fire alarm systems which have been installed into buildings all over.Pack Contains1 x KAC Standard Manual Call Point Key1 x Gent SMS S4-34899 Vigilon S-Quad Fire Alarm Manual Call Point Key1 x Gent SMS 14112-10 Old Style Gent Call Point Key1 x Menvier MFBGKEY3 Key for New Style Menvier Call Points1 x Menvier MFBGKEY2 Key for Old Style Menvier Call Points1 x Apollo 44251-176APO Key for New Style Apollo Manual Call Points1 x Fike 45-0022-S Manual Call Point Test Key1 x Howler CPK02 Pin Style Call Point Test Key1 x Aico STI Nittan MCPSK2 Spare Key for Call PointsWe also sell a Fire Alarm Panel Key Set for engineers who come across a variety of different panels.

GBP 14.34

1

KAC M2A-R680SG-K013-01 Red Surface Break Glass Indoor Call Point Flame 680 OHM

KAC M2A-R680SG-K013-01 Red Surface Break Glass Indoor Call Point Flame 680 OHMThe KAC range of Call Points are fully compliant with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only. All MCP2 products are supplied with an LED indicator as standard.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 16.01

1

Morley Conventional Intrinsically Safe Call Point 470Ohm

Morley Conventional Intrinsically Safe Call Point 470Ohm ATEX ApprovedAn Intrinsically Safe version of our MCP1A indoor call point is available for installation in hazardous areas. These call points are manufactured to protect against other hazards as defined in paragraph 1.2.7 of annex II of the ATEX Directive 949EC.They are intended for use within Intrinsically Safe I.S. systems using suitable I.S. barriers. For a list of suitable barriers see reverse. Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new Indoor Call Point range.

GBP 16.81

1

Vimpex 10-2111WFR-S Identifire Flush Remote Indicator Unit with Buzzer

Vimpex 10-2111WFR-S Identifire Flush Remote Indicator Unit with BuzzerA product designed for both conventional and analogue addressable fire alarm systems. The Identifire Remote Lamp Unit can be easily retrofitted to existing systems or incorporated as part of a new installation.As with the wider Identifire range the product is designed to fit any recessed single gang box giving a flush finish or surface mounted using the Identifire surface box.Key FeaturesDiscrete designAvailable as both a lamp and combined lampbuzzerLow current consumptionWill operate at both 12 and 24 V dcFeatures 4 x 20 mm knockouts for surface and glanded entryFlush mountLamp Unit with buzzer

GBP 14.99

1

Vores kunder ligger øverst på Google

Google Ads Specialister fra Vestjylland

Brand

Merchant

Price (EUR)