the north face xtrafoam from GBP 0 | See the cheapest prices and offers on css.nordicadpartner.dk

Balustrade Newel To Hand Rail L-Shape Bracket - 50mm x 40mm

This bracket secures the Handrail to the Newels on the outer sections of the balustrade systems. Another element of security and stability, the bracket is screwed onto the rail and the post in order to fix the two components.

GBP 1.38

1

Balustrade Spindle Insert - 37mm x 37mm

Spindle inserts are measured and fixed onto the bottom handrails and the top of the spindle posts. They are inserted into the hollow top of the spindle in order to attach the upper and lower handrails. This helps ensure the spindles are fixed securely and evenly positioned along the handrails for the smartest and sleekest finish.

GBP 0.41

1

PolyX Rafter Bar Flashing Bridging Piece - White

The PolyX Rafter Bar Flashing Bridging Piece is used in conjunction with the Lean to Flashing Trim. When used, the Rafter Bar Bridging piece should be fitted to the back edge of the bar to ensure that the flashing fits flush against the sheets.

GBP 2.89

1

Dry Verge Eaves Starter - Terracota

This universal starter, or eaves closure as it is often referred to as, is used at the eaves to ensure that the system is fully closed at the bottom of the verge.The first dry verge unit is secured onto the eaves starter via a clip that engages with the outer fins of the eaves starter unit.

GBP 3.29

1

Dry Verge Eaves Starter - Grey

This universal starter, or eaves closure as it is often referred to as, is used at the eaves to ensure that the system is fully closed at the bottom of the verge.The first dry verge unit is secured onto the eaves starter via a clip that engages with the outer fins of the eaves starter unit.

GBP 3.29

1

Dry Verge Eaves Starter - Brown

This universal starter, or eaves closure as it is often referred to as, is used at the eaves to ensure that the system is fully closed at the bottom of the verge.The first dry verge unit is secured onto the eaves starter via a clip that engages with the outer fins of the eaves starter unit.

GBP 3.29

1

Dry Verge Unit Right Hand - Grey

Each Dry verge unit clips onto the tail fins of the previous unit to ensure that it is correctly located.The dry verge unit is nailed into the tile batten through one of the holes in the tail of the unit.Dry verge units are handed. Most orders are comprised of an equal number of left and right units, but for the sake of clarity the handing of Manthorpe dry verge units is shown below;

GBP 3.85

1

Dry Verge Unit Right Hand - Brown

Each Dry verge unit clips onto the tail fins of the previous unit to ensure that it is correctly located.The dry verge unit is nailed into the tile batten through one of the holes in the tail of the unit.Dry verge units are handed. Most orders are comprised of an equal number of left and right units, but for the sake of clarity the handing of Manthorpe dry verge units is shown below;

GBP 4.13

1

Dry Verge Unit Left Hand - Grey

Each Dry verge unit clips onto the tail fins of the previous unit to ensure that it is correctly located.The dry verge unit is nailed into the tile batten through one of the holes in the tail of the unit.Dry verge units are handed. Most orders are comprised of an equal number of left and right units, but for the sake of clarity the handing of Manthorpe dry verge units is shown below;

GBP 3.85

1

Dry Verge Unit Left Hand - Terracotta

Each Dry verge unit clips onto the tail fins of the previous unit to ensure that it is correctly located.The dry verge unit is nailed into the tile batten through one of the holes in the tail of the unit.Dry verge units are handed. Most orders are comprised of an equal number of left and right units, but for the sake of clarity the handing of Manthorpe dry verge units is shown below;

GBP 4.13

1

Dry Verge Unit Left Hand - Brown

Each Dry verge unit clips onto the tail fins of the previous unit to ensure that it is correctly located.The dry verge unit is nailed into the tile batten through one of the holes in the tail of the unit.Dry verge units are handed. Most orders are comprised of an equal number of left and right units, but for the sake of clarity the handing of Manthorpe dry verge units is shown below;

GBP 4.13

1

Dry Verge Unit Right Hand - Terracotta

Each Dry verge unit clips onto the tail fins of the previous unit to ensure that it is correctly located.The dry verge unit is nailed into the tile batten through one of the holes in the tail of the unit.Dry verge units are handed. Most orders are comprised of an equal number of left and right units, but for the sake of clarity the handing of Manthorpe dry verge units is shown below;

GBP 4.13

1

Composite Decking Forte Adjustable Cradle - 10mm - 40mm

Cradles are used in the substructure of a composite decking application. Their purpose is to hold and support the joists and their height can be adjusted in order to change the overall height of the decking.

GBP 2.34

1

Composite Decking Forte Adjustable Cradle - 10mm

Cradles are used in the substructure of a composite decking application. Their purpose is to hold and support the joists and their height can be adjusted in order to change the overall height of the decking.

GBP 1.87

1

White Fascia Capping Board Internal Corner - 300mm

Internal corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. Internal corners are usually found at the foot of a valley on a roof.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Internal corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 3.77

1

White Fascia Capping Board Double End Corner - 500mm x 42mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.52

1

White Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.83

1

Foresta Wood Effect Cladding Invisible Joiner Piece - Quartz Grey

The Invisible Joint Trim is to be used to join boards together and when used, breaks up the line a little bit on larger installations covering the joint in a staggered effect._x000D_Please allow 7 - 10 days for the delivery of this product.

GBP 4.20

1

Fascia Double End Corner Trim - 500mm x 35mm White

Corner trims are used to hide the 10mm expansion gap that should be left between two fascia boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 3.02

1